INOX USA ED93F-SVR Fire Vertical Rod Exit Device Instruction Manual
- June 4, 2024
- INOX USA
Table of Contents
- INOX USA ED93F-SVR Fire Vertical Rod Exit Device Instruction Manual
- INSTALLATION INSTRUCTIONS FOR ED93F-SVR SERIES FIRE VERTICAL ROD EXIT
- 1. MARK VERTICAL AND HORIZONTAL REFERENCE LINE ON DOOR.
- 2. PREPARE DOOR
- 3. APPLY HARDWARE
- 4. ATTACH TOP AND BOTTOM CHASSIS
- 5. APPLY RAIL ASSEMBLY
- 6. APPLY COVER
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
INOX USA ED93F-SVR Fire Vertical Rod Exit Device Instruction Manual
INSTALLATION INSTRUCTIONS FOR ED93F-SVR SERIES FIRE VERTICAL ROD EXIT
DEVICE.
1. MARK VERTICAL AND HORIZONTAL REFERENCE LINE ON DOOR.
DETERMINE BACKSET TO LOCATE VERTICAL REFERENCE LINE.
- IF LOCK STILE IS 4-1/2″ WIDE OR WIDER, BACKSET IS 2-3/4″.
- IF LOCK STILE IS LESS THAN 4-1/2″ WIDE, BACKSET IS HALF OF THE EXPOSED WIDTH OF LOCK STILE.
2. PREPARE DOOR
3. APPLY HARDWARE
4. ATTACH TOP AND BOTTOM CHASSIS
5. APPLY RAIL ASSEMBLY
-
CHECK THE SIZE OF DEVICE, IF CUTTING TO LENGTH IS REQUIRED.
-
DETERMINE CUT OFF LENGTH “X” BY SUBTRACTING 1-3/4″ FROM “Y”, MARK CUT OFF POINT ON MOUNTING RAIL.
-
DEPRESS ARM INTO RAIL OPENING AND SLIDE RAIL ONTO CHASSIS. LEVEL RAIL AND FASTEN CHASSIS AND MOUNTING PLATE.
6. APPLY COVER
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>