Kenwood KDC-361U CD Receiver Instruction Manual

: June 16, 2024
: KENWOOD

Kenwood KDC-361U CD Receiver

Product Information

Specifications

Model Numbers: KDC-361U, KDC-261UB, KDC-261UR, KDC-161UB, KDC-161UR, KDC-161UG, KDC-130Y, KDC-120RY, KDC-100Q, KDC-161URY
Type: CD Receiver
Manufacturer: JVC KENWOOD Corporation
Address: 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan
EU Representative: JVCKENWOOD NEDERLAND B.V.
Representative Address: Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

Product Usage Instructions

Before Use
Warning: Do not operate any function that takes your attention away from safe driving.
Batteries: If the batteries are swallowed, contact a physician immediately.

Maintenance:

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector: Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage it.

Handling discs:
Basics
Faceplate:

Volume knob (turn/press)
Detach button

To Turn on the power: Press the volume knob.
To Adjust the volume: Turn the volume knob.
To Select a source: Use the volume knob to navigate through the available sources.
To Change the display information: Press the volume knob.

Getting Started

Select the display language and cancel the demonstration:
- When you turn on the power (or after you reset the unit), the display shows: SEL LANGUAGE PRESS VOLUME KNOB
- Turn the volume knob to select [ENG] (English) or [RUS] (Russian), then press the knob. [ENG] is selected for the initial setup.
- The display shows: CANCEL DEMO VOLUME KNOB
- Press the volume knob. [YES] is selected for the initial setup.
- Press the volume knob again. DEMO OFF appears.
Set the clock:
- Press the volume knob to enter [FUNCTION].
- Turn the volume knob to select [CLOCK], then press the knob.
- Turn the volume knob to select [CLOCK ADJUST], then press the knob.
- Turn the volume knob to make the settings, then press the knob.
- Turn the volume knob to select [CLOCK FORMAT], then press the knob.
- Turn the volume knob to select [12H] or [24H], then press the knob.

FAQ

Q: How do I clean the unit?
A: Wipe off dirt on the faceplate with a dry silicone or soft cloth. Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage it.
Q: How do I set the clock?
A: Press the volume knob to enter [FUNCTION]. Turn the volume knob to select [CLOCK], then press the knob. Turn the volume knob to select [CLOCK ADJUST], then press the knob. Turn the volume knob to make the settings, then press the knob. Turn the volume knob to select [CLOCK FORMAT], then press the knob. Turn the volume knob to select [12H] or [24H], then press the knob.

Information on Disposal of Old Electrical and Electronic Equipment and Batteries
(applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment.
Notice: The sign “Pb” below the symbol for batteries indicates that this battery contains lead.

Declaration of Conformity with regard to the EMC Directive 2004/108/EC

Declaration of Conformity with regard to the RoHS Directive 2011/65/EU

Manufacturer:
JVC KENWOOD Corporation
3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, Japan

EU Representative:
JVCKENWOOD NEDERLAND B.V.
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

CLASS 1LASER

The marking of products using lasers
The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

How to read this manual

Operations are explained mainly using buttons on the faceplate.
[XX] indicates the selected items.
( XX) indicates references are available on the stated page.

BEFORE USE

Warning
Do not operate any function that takes your attention away from safe driving.

Caution
Volume setting:

Adjust the volume so that you can hear sounds outside the car to prevent accidents.
Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

Avoid using the USB device or iPod/iPhone if it might hinder safe driving.
Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.
Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.
If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

Remote control (RC-406):

Do not leave the remote control in hot places such as on the dashboard.
The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.
The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Keep the battery out of reach of children and in its original packaging when not in used. Dispose of used batteries promptly. If swallowed, contact a physician immediately.

Maintenance

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicone or soft cloth.
Cleaning the connector: Detach the faceplate and clean the connector gently with a cotton swab, being careful not to damage the connector.

Handling discs:

Do not touch the recording surface of the disc.
Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
Do not use any accessories for the disc.
Clean from the center of the disc and move outward.
Clean the disc with a dry silicone or soft cloth. Do not use any solvents.
When removing discs from this unit, pull them out horizontally.
Remove burrs from the center hole and disc edge before inserting a disc.

BASICS

Faceplate

How to reset

Your preset adjustments will also be erased.

Remote control (RC-406)(supplied for KDC-130Y )

How to replace the battery

GETTING STARTED

Select the display language and cancel the demonstration When you turn on the power (or after you reset the unit), the display shows: “SEL LANGUAGE” “PRESS” “VOLUME KNOB”

Turn the volume knob to select [ENG] (English) or [RUS] (Russian), then press the knob. [ENG] is selected for the initial setup.
Then, the display shows: “CANCEL DEMO” “PRESS” “VOLUME KNOB”
Press the volume knob.
[YES] is selected for the initial setup.
Press the volume knob again.
“DEMO OFF” appears.

Set the clock

Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [CLOCK], then press the knob.
Turn the volume knob to select [CLOCK ADJUST], then press the knob.
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
Turn the volume knob to select [CLOCK FORMAT], then press the knob.
Turn the volume knob to select [12H] or [24H], then press the knob. 7 Press and hold to exit.

(or)

Press and hold DISP SCRL to enter clock adjustment mode directly while in clock display screen.
Turn the volume knob to make the settings, then press the knob.
Day Hour Minute
To return to the previous setting item or hierarchy, press

Set the initial settings

Press SRC to enter STANDBY.
Press the volume knob to enter [FUNCTION].
Turn the volume knob to make a selection (see the following table), then press the knob.
Press and hold to exit.

To return to the previous setting item or hierarchy, press

AUDIO CONTROL

SWITCH PREOUT
(Except for KDC-100Q )
REAR / SUB-W : Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear (through an external amplifier).
SP SELECT OFF / 5/4 / 6 × 9/6 / OEM : Selects according to the speaker size (5 inches or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.
DISPLAY
EASY MENU (For KDC-361U / KDC-130Y )
ON : Both display and button illumination change to white color when entering [FUNCTION]. ; OFF : Both display and button illumination remain as [COLOR SELECT] color. ( 10)
TUNER SETTING
PRESET TYPE ***NORMAL* : Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/ LW). ; MIX : Memorizes one station for each preset button, regardless of the selected band.
SYSTEM**

KEY BEEP| ON : Activates the keypress tone. ;
OFF : Deactivates.
SOURCE SELECT
BUILT-IN AUX **ON : Enables AUX in source selection. ; OFF : Disables. ( 8)
RUSSIAN SET| Selects the display language for [FUNCTION] menu and Tag information (folder name, file name, song title, artist name, album name) if applicable.
RUSSIAN OFF : Display language is English. ; РУССКИЙ BКЛ : Display language is Russian.
P-OFF WAIT| Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.
20M : 20 minutes ; 40M : 40 minutes ;
60M : 60 minutes ; OFF –– – : Cancels
CD READ| 1 : Automatically distinguishes between audio file disc and music CD. ; 2 : Forces to play as an music CD. No sound can be heard if an audio file disc is played.
F/W UPDATE
UPDATE SYSTEM
| F/W UP xx.xx ****YES : Starts upgrading the firmware. ;
NO** : Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/ cs/ce/

Search for a station

Press SRC to select TUNER.
Press BAND repeatedly (or press *AM– / #FM+ on RC-406) to select FM1/ FM2/ FM3/ MW/ LW.
Press (or press (+) on RC-406) to search for a station.
- To change the searching method for : Press SEEK repeatedly.
  AUTO1: Automatically search for a station.
  AUTO2: Automatically search for a preset station. MANUAL: Manually search for a station.
- To store a station: Press and hold one of the number buttons (1 to 6).
- To select a stored station: Press one of the number buttons (1 to 6) (or press one of the number buttons (1 to 6) on RC-406).

Direct Access Tuning (using RC-406) (for KDC-130Y )

Press DIRECT to enter Direct Access Tuning. “– – – • –” (for FM) or “– – – –” (for MW/ LW) appears on the display.
Press the number buttons to enter a frequency.
Press ENT to search for a station.
- To cancel, press or DIRECT.
- If no operation is done for 10 seconds after step 2, Direct Access Tuning is automatically canceled.

Other settings

Press the volume knob to enter [FUNCTION].
Turn the volume knob to make a selection (see the following table), then press the knob.
Press and hold to exit.

To return to the previous setting item or hierarchy, press .

Except for KDC-100Q :
[LOCAL SEEK]/ [MONO SET]/ [NEWS SET]/ [REGIONAL]/ [AF SET]/ [TI]/ [PTY SEARCH] is selectable only when the band is FM1/ FM2/ FM3.

For KDC-100Q :
[LOCAL SEEK]/ [MONO SET]/ [NEWS SET]/ [REGIONAL]/ [AF SET]/ [TI]/ [PTY SEARCH] is selectable only when the band is FM1/ FM2.
When the band is FM3, [LOCAL SEEK] can only be selected.

Available Program Type:
SPEECH: NEWS, AFFAIRS, INFO (information), SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, WEATHER, FINANCE, CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT
MUSIC: POP M (music), ROCK M (music), EASY M (music), LIGHT M (music), CLASSICS, OTHER M (music), JAZZ, COUNTRY, NATION M (music), OLDIES, FOLK M (music)
The unit will search for the Program Type categorized under [SPEECH] or [MUSIC] if selected.
If the volume is adjusted during reception of traffic information, alarm or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, alarm or news bulletin function is turned on.

Start playback

The source changes automatically and playback starts.

CD

USB

iPod/iPhone (for KDC-361U / KDC-261UB / KDC-261UR )

Press and hold iPod to select the control mode while in iPod source.
MODE ON: From the iPod. ( 7, *1)
MODE OFF: From the unit.

KDC-361U
KDC-261UB
KDC-261UR

You can still play/pause, file search, fast-forward or reverse files from the unit.
Only for MP3/WMA/WAV files. This does not work for iPod.
For iPod: Applicable only when [MODE OFF] is selected.
For CD: Only for MP3/WMA files.

If you connect the iPod/iPhone to the USB input terminal of the unit (while listening to TuneIn, TuneIn Radio Pro or Aupeo), the unit will output the sound from these apps.

Select a track/file from a list

For iPod: Applicable only when [MODE OFF] is selected. ( 6)

Press .
Turn the volume knob to make a selection, then press the knob.

MP3/WMA/WAV file: Select the desired folder, then a file.
iPod or KME Light/ KMC file: Select the desired file from the list (PLAYLISTS, ARTISTS, ALBUMS, SONGS, PODCASTS, GENRES, COMPOSERS).

Only for iPod.
To return to the root folder (or first file), press number button 5.
To return to the previous setting item or hierarchy, press .
To cancel, press and hold .

If you have many files….
You can search through them quickly (on step 2 above) at a preset skip search ratio by pressing .

See also “Set the skip search ratio.” ( 8)
Pressing and holding skip songs at the maximum ratio (10%) regardless of the setting made.
For USB: Only for files registered in the database created with KME Light/ KMC.
Not applicable for audio CD.

Direct Music Search (using RC-406) (for KDC-130Y )

Press DIRECT.
Press the number buttons to enter a track/ file number.
Press ENT to search for music.
- To cancel, press .
- Not available if Random Play is selected.
- Not applicable for iPod, KME Light/ KMC file.

Select a song by name

While listening to iPod…

Press .
Turn the volume knob to select a category, then press the knob.
Turn the volume knob quickly to enter character search.
Turn the volume knob to select the character to be searched for.
Press to move to the entry position.
You can enter up to 3 characters.
Press the volume knob to start searching. 7 Turn the volume knob to make a selection, then press the knob.
Repeat step 7 until the desired item is selected.
- To search for a character other than A to Z and 0 to 9, enter only “ * ”.
- To return to the previous hierarchy, press .
- To return to the top menu, press number button 5.
- To cancel, press and hold .

Set the skip search ratio
While listening to iPod or KME Light/ KMC file…

Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [USB], then press the knob.
Turn the volume knob to select [SKIP SEARCH], then press the knob.
Turn the volume knob to make a selection, then press the knob.
0.5% (default)/ 1%/ 5%/ 10%: Skip search ratio over the total files.
Press and hold to exit.

Change the USB drive
When a smartphone (Mass Storage Class) is connected to the USB input terminal, you can select its internal memory or external memory (such as an SD card) to playback the stored songs. You can also select the desired drive to playback when a multiple drives device is connected. Press number button 5 repeatedly to select the desired drive.
(or)

Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [USB], then press the knob.
Turn the volume knob to select [MUSIC DRIVE], then press the knob.
Press the volume knob to select [DRIVE CHANGE].

The next drive is selected automatically. Repeat steps 1 to 4 to select the following drives.
Selectable items: [DRIVE 1] to [DRIVE 5]

AUX

Preparation:
Select [ON] for [BUILT-IN AUX]. ( 5)

Start listening

Connect a portable audio player (commercially available).
Press SRC to select AUX.
Turn on the portable audio player and start playback.

Set the AUX name
While listening to a portable audio player connected to the unit…

Press the volume knob to enter [FUNCTION]
Turn the volume knob to select [SYSTEM], then press the knob.
Turn the volume knob to select [AUX NAME SET], then press the knob.
Turn the volume knob to make a selection, then press the knob. AUX (default)/ DVD/ PORTABLE/ GAME/ VIDEO/ TV
Press and hold to exit.

AUDIO SETTINGS

While listening to any source…

Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [AUDIO CONTROL], then press the knob.
Turn the volume knob to make a selection (see the following table), then press the knob.
Repeat step 3 until the desired item is selected or activated.
Press and hold to exit.

(or using RC-406)

Press AUD to enter [AUDIO CONTROL].
Press / to make a selection, then press ENT
To return to the previous setting item or hierarchy, press

Default: XX

PRESET EQ| DRIVE EQ / TOP40 / POWERFUL / ROCK / POPS / EASY / JAZZ /
NATURAL / USER : Selects a preset equalizer suitable to the music genre. (Select [USER] to use the customized bass, middle, and treble settings.)
[DRIVE EQ] is a preset equalizer that reduces noise from the road.
---|---
BASS BOOST| LV1 / LV2 / LV3 : Selects your preferred bass boost level. ;
OFF : Cancels.
LOUDNESS| LV1 / LV2 : Selects your preferred low and high frequencies boost to produce a well-balanced sound at a low volume level. ; OFF : Cancels.
SUBWOOFER SET| ON : Turns on the subwoofer output. ; OFF : Cancels.
LPF SUBWOOFER| THROUGH : All signals are sent to the subwoofer. ; 85HZ / 120HZ / 160HZ : Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are sent to the subwoofer.
SUB-W **PHASE*| REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [LPF SUBWOOFER].)
FADER| R15 to F15 ( 0 ): Adjusts the rear and front speaker output balance.
BALANCE| L15 to R15 ( 0 ): Adjusts the left and right speaker output balance.
VOLUME OFFSET
(Default: 0 )| –8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume adjustment level of each source. (Before adjustment, select the source you want to adjust.)
SOUND RECNSTR
(Sound reconstruction)| ON : Creates realistic sound by compensating the high-frequency components and restoring the rise-time of the waveform that are lost in audio data compression. ; OFF** : Cancels.

[SUB-W LEVEL]/ [SUBWOOFER SET]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if [SWITCH PREOUT] is set to [SUB-W]. ( 4)
[SUB-W LEVEL]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if [SUBWOOFER SET] is set to [ON].

Except for KDC-100Q .

DISPLAY SETTINGS

Press the volume knob to enter [FUNCTION].
Turn the volume knob to select [DISPLAY], then press the knob.
Turn the volume knob to make a selection (see the following table), then press the knob. Repeat step 3 until the desired item is selected or activated.
Press and hold to exit.
To return to the previous setting item or hierarchy, press .

Default: XX

For KDC-361U / KDC-130Y .

MORE INFORMATION

General
This unit can only play the following CDs:

Detailed information and notes about the playable audio files are stated in an online manual on the following web site: www.kenwood.com/cs/ce/audiofile/

Playable files

Playable audio file: MP3 (.mp3), WMA (.wma)
Playable disc media: CD-R/CD-RW/CD-ROM
Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name.
Playable USB device file system: FAT12, FAT16, FAT32 Even when audio files comply with the standards listed above, playback may be impossible depending on the types or conditions of media or device.

Unplayable discs

Discs that are not round.
Discs with coloring on the recording surface or discs that are dirty.
Recordable/ReWritable discs that have not been finalized.
8 cm CD. Attempting to insert using an adapter may cause malfunction.

About USB devices

This unit can play MP3/WMA/WAV files stored on a USB mass storage class device.
You cannot connect a USB device via a USB hub.
Connecting a cable whose total length is longer than 5 m may result in abnormal playback.
This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.

About KENWOOD Music Editor Light and KENWOOD Music Control

This unit supports the PC application KENWOOD Music Editor Light and Android™ application KENWOOD Music Control.
When you play audio files with song data added using the KENWOOD Music Editor Light or KENWOOD Music Control, you can search for audio files by Genres, Artists, Albums, Playlists, and Songs.
KENWOOD Music Editor Light and KENWOOD Music Control are available on the following web site: www.kenwood.com/cs/ce/

About iPod/iPhone
Made for

iPod touch (1st, 2nd, 3rd, 4th, and 5th generation)
iPod classic
iPod nano (3rd, 4th, 5th, 6th, and 7th generation)
iPhone, iPhone 3G, 3GS, 4, 4S, 5
For the latest compatible list and software versions of iPhone/iPod, see: www.kenwood.com/cs/ce/ipod
To connect devices featuring Lightning connector, both KCA-iP102 (optional accessory) and Apple Lightning to 30-pin Adapter (accessory of the iPod/iPhone) are required.
Do not leave the Apple Lightning to 30-pin Adapter inside the car to prevent damages caused by the hot temperature.
You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod.

TROUBLESHOOTING

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory. ( 13, 14) When a call comes in, “CALL” appears. (The audio system pauses.) To continue listening to the audio system during a call, press SRC. “CALL” disappears and the audio system resumes. When the call ends, “CALL” disappears. (The audio system resumes.)

Warning

The unit can only be used with a 12 V DC power supply, negative ground.
Disconnect the battery’s negative terminal before wiring and mounting.
Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit.
Insulate unconnected wires with vinyl tape to prevent a short circuit.
Be sure to ground this unit to the car’s chassis again after installation. Caution
For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer.
Install this unit in the console of your vehicle. Do not touch the metal parts of this unit during and shortly after use of the unit. Metal parts such as the heat sink and enclosure become hot.
Do not connect the wires of speakers to the car chassis or Ground wire (black), or connect them in parallel.
Mount the unit at an angle of less than 30º.
If your vehicle wiring harness does not have the ignition terminal, connect Ignition wire (red) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on and off by the ignition key.
After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.
If the fuse blows, first make sure the wires are not touching car’s chassis, then replace the old fuse with one that has the same rating.

Basic procedure

Remove the key from the ignition switch, then disconnect the terminal of the car battery.
Connect the wires properly.
See Wiring connection. ( 13, 14)
Install the unit to your car.
See Installing the unit (in-dash mounting).
Connect the terminal of the car battery.
Reset the unit. ( 3)

Installing the unit (in-dash mounting)

How to remove the unit

Detach the faceplate.
Fit the catch pin on the extraction keys into the holes on both sides of the trim plate, then pull it out.
Insert the extraction keys deeply into the slots on each side, then follow the arrows as shown on the right.

Wiring connection (except for KDC-100Q )

Pin	Color and function
A4	Yellow
A5	Blue/White
A7	Red
A8	Black
B1	Purple+
B2	Purple/black
B3	Gray+
B4	Gray/black
B5	White+
B6	White/black
B7	Green+
B8	Green/black

Wiring connection (for KDC-100Q )

SPECIFICATIONS

Tuner| FM Frequency Range
_Usable_ Sensitivity (S/N = 26 dB) Quieting Sensitivity _(DIN S/N = 46
dB)
_Frequency Response (±3 dB) Signal-to-Noise Ratio (MONO) Stereo Separation (1 kHz)| Except for KDC-100Q :
FM1/ FM2/ FM3: 87.5 MHz — 108.0 MHz (50 kHz space) For KDC-100Q :
FM1/ FM2: 87.5 MHz to 108.0 MHz (50 kHz space)
FM3: 65.00 MHz to 74.00 MHz (30 kHz space) 0.71 μV/75 Ω _
2.0 μV/75 Ω
30 Hz — 15 kHz
64 dB
40 dB
---|---|---
MW| Frequency Range| 531 kHz — 1 611 kHz (9 kHz space)
Usable Sensitivity (S/N = 20 dB)| 28.2 μV
LW| Frequency Range| 153 kHz — 279 kHz (9 kHz space)
Usable Sensitivity (S/N = 20 dB)| 50 μV
USB| USB Standard| USB 1.1, USB 2.0 (Full speed)
---|---|---
Maximum Supply Current| DC 5 V     1 A
File System| FAT12/16/ 32
MP3 Decode| Compliant with MPEG-1/2 Audio Layer-3
WMA Decode| Compliant with Windows Media Audio
WAV Decode| Linear-PCM
Audio| Maximum Output Power| 50 W × 4
---|---|---
Output Power
(DIN 45324, +B = 14.4 V)| 30 W × 4
Speaker Impedance| 4 Ω — 8 Ω
Tone Action| Bass               200 Hz ±8 dB
Middle_ 2.5 kHz ±8 dB
Treble             12.5 kHz ±8 dB
Preout Level/Load (CD)| Except for KDC-100Q : 2 500 mV/10 kΩ
Preout Impedance| ≤ 600 Ω
Auxiliary| Frequency Response (±3 dB)          20 Hz — 20 kHz
---|---
Input Maximum Voltage 1 200 mV
Input Impedance 30 kΩ
General| Operating Voltage| 14.4 V (10.5 V — 16 V allowable)
---|---|---
Maximum Current Consumption| 10 A
Operational Temperature Range| 0oC — +40oC
Installation Size (W × H × D)| 182 mm × 53 mm × 159 mm
Weight| 1.2 kg

Subject to change without notice.

“Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
Lightning is a trademark of Apple Inc.
Android is trademark of Google Inc.