MOUNT PRO EV002 Dual Monitor Mount Instruction Manual

June 16, 2024
MOUNT PRO

MOUNT PRO EV002 Dual Monitor Mount

Product Information

Specifications

  • Product Model: DWD1412_EU2.0
  • Product Dimensions: 185mm x 75mm x 423mm (7.3″ x 2.9″ x 16.65″)
  • Load Capacity: Each Monitor MAX: 8 kg (17.6 lbs)

Product Usage Instructions

Safety Caution

Before assembly, please check and make sure all necessary accessories are included and undamaged. Read and understand the manual carefully before installation.

Warning

This product contains small items that could be a choking hazard if swallowed. Keep away from children under 3 years old. Adult supervision is required. Improper installation, such as using the product for monitors over its load capacity or for any purpose not explicitly specified, may cause damage or serious injury. We would not be liable for any damage or injury mounting or caused by improper inappropriate use.

Caution and Maintenance

Never allow children to climb, stand, hang, or play on any part of the monitor or stand. This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury. Check that the bracket is secure and safe to use at regular intervals (at least every three months).

Installation Steps

  1. Apply pad (I) to the bottom of the Pole (D) to avoid desk
    scratches.

  2. Mount Clamp (C) to the bottom of the Pole (D) by tightening
    pre-assembled bolts (C6) with the 5mm Allen Key (J).

  3. Secure the clamp to the desktop.

Installation Steps (in German)

  1. Bringen Sie die Unterlage (I) an der Unterseite der Stange (D) an, um Kratzer auf dem Schreibtisch zu vermeiden.
  2. Befestigen Sie die Klemme (C) am unteren Teil der Stange (D), indem Sie die vormontierten Schrauben (C6) mit dem 5mm Inbusschlüssel (J) festziehen.
  3. Sichern Sie die Klemme am Schreibtisch.

Installation Steps (in Italian)

  1. Applicare il tampone (I) sul fondo dell’asta (D) per evitare di graffiare la scrivania.
  2. Montare il morsetto (C) sul fondo dell’asta (D) stringendo I bulloni preassemblati (C6) con una chiave a brugola da 5 mm (J).
  3. Poi fissare il morsetto al desktop.

Installation Steps (in Spanish)

  1. Retire el protector de plástico del orificio (si corresponde).
  2. Desmonte el soporte (C1) y el tornillo (C2) del soporte de abrazadera (C).
  3. Aplique la almohadilla (I) en la parte inferior del poste (D) para evitar rayones en el escritorio.
  4. Asegure la base al escritorio utilizando los tornillos preensamblados (C6) con una llave Allen de 5 mm (J).

FAQ

  • Q: What is the maximum load capacity of each monitor?
  • A : Each monitor has a maximum load capacity of 8 kg (17.6 lbs).
  • Q: Can this product be used outdoors?
  • A: No, this product is intended for indoor use only. Using it outdoors could lead to product failure and personal injury.
  • Q : How often should I check the bracket for safety?
  • A: It is recommended to check the bracket’s security and safety at least every three months.

Safety Caution

BEFORE ASSEMBLY

  • Please check and make sure all necessary accessories are included and undamaged.
  • Please read and understand this manual carefully before installation.

WARNING

  • This product contains small items that could be a choking hazard if swallowed. KEEP AWAY FROM CHILDREN UNDER 3 YEARS OLD. ADULT SUPERVISION IS REQUIRED.
  • Improper installation, such as using the product for monitors over its load capacity or for any purpose not explicitly specified, may cause damage or serious injury. We would not be liable for any damage or injury mounting or caused by improper inappropriate use.

CAUTION AND MAINTENANCE

  • Never allow children to climb, stand, hang, or play on any part of the monitor or stand.
  • This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
  • Check that the bracket is secure and safe to use at regular intervals (at least every three months).

Product Dimensions

Parts and Hardware

MOUNT-PRO-EV002-Dual-Monitor-Mount-FIG-2

NOTE: Not all parts and hardware included will be used.

Base Installation

OPTION A: Clamp Installation

Apply pad (I) to the Pole (D) bottom to avoid desk scratches. Mount Clamp (C) to the bottom of Pole (D) by tightening pre-assembled bolts (C6) with 5mm Allen Key (J). Then secure the clamp to the desktop

MOUNT-PRO-EV002-Dual-Monitor-Mount-FIG-18

OPTION B : Grommet Base Installation

Remove the plastic protector from the hole(if any). Detach Bracket (C1) and Bolt (C2) from Clamp (C). Apply pad (I) to the Pole (D) bottom to avoid desk scratches. Secure base to the desktop by using Bracket (C1) and Bolt (C2).

MOUNT-PRO-EV002-Dual-Monitor-Mount-FIG-5

Arm Installation

Install wire clip (F) and swivel arm (B) to the pole (D). Fasten the bolt with the supplied 6mm Allen key (K).  Attached the wire clips (G) to the swivel arm (B).

MOUNT-PRO-EV002-Dual-Monitor-Mount-FIG-6

Attach a VESA Plate to Monitor

Select Correct Monitor Screw Length

Do not tighten the screws excessively or your monitor might be damaged.

  • Flat Back

  • Recessed or Curved Back

Hang Monitor

Slide the monitor onto the head of the swivel arm (B).

Install the plastic cover (H) with security bolt (E). Tighten the bolt with the supplied 5mm Allen key (J). Make sure the security bolt (E) is installed before you rotate the monitor.

Angle Adjustments

Problem: If monitor face down

Solution

  1. Loosen the tilting bolt.
  2. Adjust the monitor to your desired tilt angle.
  3. Retighten the tilting bolt to fix the intended angle

Adjust as Desired

Run cables through the Wire Clip.

MOUNT-PRO-EV002-Dual-Monitor-Mount-FIG-15

Adjust monitor position and rotation. For minor height adjustment, turn the plastic cover (H) with the supplied 6mm Allen Key (K) to raise or lower the monitor. Ignore this step if the two monitors are level

MOUNT-PRO-EV002-Dual-Monitor-Mount-FIG-16

Note : To ensure stability, the tightness of the rotating axis has been preset, so it would be kind of difficult to rotate the VESA plate. Suggestion: Please attach the monitor first, then hold the sides of it with both hands, and rotate vigorously. If that doesn’t work out, please feel free to contact Customer Service via Amazon before returning.

Rotate Vigorously

Documents / Resources

| MOUNT PRO EV002 Dual Monitor Mount [pdf] Instruction Manual
EV002 Dual Monitor Mount, EV002, Dual Monitor Mount, Monitor Mount, Mount
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals