MOUNT PRO PR6002 Dual Monitor Desk Mount Instruction Manual

MOUNT PRO PR6002 Dual Monitor Desk Mount

Product Information

Specifications:

• Model: PR6002
• VESA Compatibility: 75×75, 100×100
• Weight Capacity: (3~14kg)x2, (6.6~30.9lbs)x2

Product Usage Instructions

WARNING!

• If you do not understand these instructions or have doubts about the safety of the installation, assembly, or use of this product, please contact us.
• Before starting assembly, verify all parts are included and undamaged. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
• This product contains small items that could be a choking hazard if swallowed. NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

Package Contents:

• (x2) Upper Arm (A)
• (x2) Lower Arm (B)
• (x1) Base (C)
• (x1) Bracket (D)
• (x1) Base Support Cover (E)
• (x2) VESA Plate (F)
• (x1) Clamp (G)
• (x1) Carriage Bolt (H)
• (x1) Grommet Base (I)
• (x1) Support Plate (J)
• (x1) Wingnut (K)
• (x5) M6x10 Bolt (L)
• (x4) Pad (M)
• (x2) Bolt (N)
• (x1) 3mm Allen Key (O)
• (x1) 4mm Allen Key (P)
• (x1) 6mm Allen Key (Q)
• (x8) M4x12 Bolt (M-A)
• (x8) M4x16 Bolt (M-B)
• (x8) M6x12 Bolt (M-C)
• (x8) M6x16 Bolt (M-D)
• (x8) D6 Washer (M-E)
• (x8) Spacer (M-F)

Assembly Steps:

Step 1: Clamp Installation OR Grommet Base Installation

OPTION A: Clamp Installation
Mount Bracket (D) to Base (C) with Bolts (L). Bolts could be tightened by the 4mm Allen Key (P). Apply pads (M) to the Bolts (L) to avoid desk scratches.

1. 1. Similarly, attach Clamp (G) to Bracket (D) with Bolts (L) and 4mm Allen Key (P).

2. 1. Adjust the Clamp width to fit with the desk. Secure the stand to the desktop by tightening Clamp (G) or by Allen key (Q). Attach Base Support Cover (E) to Bracket (D).

OPTION B: Grommet Base Installation
Place Carriage Bolt (H) through the center of Grommet Base (I). Mount Grommet Base to Base (C) bottom with Bolts (L) and tighten with the 4mm Allen key (P). Apply pads (M) to the Bolts (L) to avoid desk scratches.

1. Run Carriage Bolt (H) through the Grommet Hole on the desktop. Attach Support Plate (J) and Wingnut (K). Finally, tighten Wingnut (K).

Step 2: Arm Installation

1. Install the lower arm (B) and the upper arm (A) to the base (C). Secure the arm by tightening the inside screw using the 3mm Allen key (O). DO NOT tighten the screw excessively or it might be stripped.

Step 3: Attach Monitor

OPTION A: Flat Back Monitor

1. 1. Attach the VESA plate (F) to the back of the monitor and secure  

   it with screws (M-A) or (M-C) with washers (M-E) using the 6mm
   Allen Key (Q). Do not tighten the screws excessively or your
   monitor might be damaged.

OPTION B: Curved Back Monitor

1. Attach the VESA plate (F) to the back of the monitor and secure it with screws (M-B) or (M-D) with washers (M-E) and washers (M-F) using the 6mm Allen Key (Q). Do not tighten the screws excessively or your monitor might be damaged.

FAQ:

• Q: What is the weight capacity of the Premium Dual Monitor Stand?
  A: The weight capacity of the Premium Dual Monitor Stand is (3~14kg)x2 or (6.6~30.9lbs)x2.

• Q: Can I use this product for curved back monitors?
  A: Yes, you can use this product for both flat back and curved back monitors. Please refer to the instructions for attaching the VESA plate securely.

Premium Dual Monitor Stand
Instruction Manual If you have any questions , please contact us.

WARNING!

• If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.
• Before starting assembly, verify all parts are included and undamaged. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
• This product contains small items that could be a choking hazard if swallowed. NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTSPACKAGE CONTENTS

DO NOT EXCEED WEIGHT CAPACITY.

If there is a need, please mount the USB based on following steps.

ASSEMBLY STEPS

STEP 1: Clamp Installation OR Grommet Base Installation

• OPTION A: Clamp Installation
  • Mount Bracket (D) to Base (C) with Bolts (L). Bolts could be tightened by the 4mm Allen Key (P). Apply pads (M) to the Bolts (L) to avoid desk scratches.
  • Similarly, attach Clamp (G) to Bracket (D) with Bolts (L) and 4mm Allen Key (P).
  • Adjust the Clamp width to fit with desk. Secure stand to desktop by tightening Clamp (G) or by Allen key (Q). Attach Base Support Cover (E) to Bracket (D).
• OPTION B: Grommet Base Installation
  • Place Carriage Bolt (H) through the center of Grommet Base (I).
  • Mount Grommet Base to Base (C) bottom with Bolts (L) and tighten by 4mm allen key (P). Apply pads (M) to the Bolts (L) to avoid desk scratches.
  • Run Carriage Bolt (H) through Grommet Hole on desktop. Attach Support Plate (J) and Wingnut (K). Last step, tighten Wingnut (K).

STEP 2: Arm Installation

Install the lower arm (B) and the upper arm (A) to the base (C). Secure the arm by tightening the inside screw using 3mm Allen key (O).

STEP 3 : Attach Monitor

• OPTION A: Flat Back Monitor
  Attach the VESA plate (F) to back of monitor and secure with screws(M-A)or(M-C) with washers(M-E) using 6 mm Allen Key (Q). Do not tighten the screws excessively or your monitor might be damaged.

• OPTION B: Curved Back Monitor
  Attach the VESA plate (F) to back of monitor and secure with screws (M-B) or (M-D) with washers (M-E)and washers(M-F)using 6 mm Allen Key (Q). Do not tighten the screws excessively or your monitor might be damaged.

• NOTE: Hand tighten screws to avoid over tightening.

STEP 4: Hang Monitor

• Slide the monitor onto the head of swivel arm, install the security bolt (N). Make sure the security bolt is installed before you rotate the monitor.
• Refer to below illustrations to adjust tilting angle of your monitor.

Note :

1. Loosen the tilting bolt.
2. Adjust monitor to your desired tilting angle.
3. Retighten the tilting bolt to fix the tilting angle.

STEP 5: Adjust Tension

For proper functioning of this mount, depending on different weight of monitor you might need to adjust tension in upper arm (A) using 6 mm allen key (Q ).

• Falls down Falls down
  • After being attached to the arm, the monitor falls down and can not stay at the desired height by itself.
  • Turn counter-clockwise(“+”direction) to increase gas spring tension until the monitor can stay at the desired height by itself.
• Rises up
  • After being attached to the arm, the monitor rises up and can not stay at the desired height by itself.
  • Turn clockwise(“-”direction) to reduce gas spring tension until the monitor can stay at the desired height by itself.

Note2:
As for how many circles the screw should be turned, the table below is for reference.

Monitor Weight| 3kg| 4kg| 7kg| 10kg| 13kg| 14kg
---|---|---|---|---|---|---
Circles (AT LEAST)| 5| 7| 10| 13| 16| 20

STEP 6: Cable Management

• Remove bottom plastic covers from arm as shown in diagram. from the arm, do not need to take much effort to pull the ends of the cable cover away from the arm.
• Run cables from monitor through bottom of arm. Reattach plastic covers as shown in diagram.

Adjust as Desired
Allen key(Q,O) can be stored in Base Support Cover(E) for next time using.

Note:
When tilted, if the monitor sags or does not stay, please fasten the tilting bolt on the mount until the monitor can be held at any angle as needed .

Product Dimensions

CAUTION AND MAINTENANCE

• Never allow children to climb, stand, hang, or play on any part of monitor or stand.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
• Check that the bracket is secure and safe to use at regular intervals (at least every three months).

If you have any questions, please contact us.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>