MOUNT PRO DWD1416C-US1.0 Dual Monitor Stand Free Standing Full Motion Monitor Desk Mount Instruction Manual
- June 16, 2024
- MOUNT PRO
Table of Contents
MOUNT PRO DWD1416C-US1.0 Dual Monitor Stand Free Standing Full Motion
Monitor Desk Mount
Product Information
Specifications
- Model: DWD1416C-US1.0
- VESA Compatibility: 75x75mm, 100x100mm
- Weight Capacity: 8kg (17.6lbs) per monitor
FAQ
- Q: What is the weight capacity of the dual monitor stand?
- A: The weight capacity of the dual monitor stand is 8kg (17.6lbs) per monitor.
- Q: Can I tilt the monitors?
- A: Yes, you can tilt the monitors by loosening the tilting bolt, adjusting the tilt angle, and then retightening the bolt to fix the angle.
- Q: How do I adjust the height of the monitors?
- A: For minor height adjustment, you can turn the plastic cover (G) with the supplied 6mm Allen Key (J) to raise or lower the monitor.
- Q: Can I use this dual monitor stand for monitors with different VESA sizes?
- A: Yes, the dual monitor stand is compatible with VESA sizes 75x75mm and 100x100mm.
- Q: Is the installation process complicated?
- A: The installation process is straightforward, but if you have any confusions or are not quite sure about the installation, please do not hesitate to ask for our help.
If you have any questions, please feel free to contact Customer Service via Amazon before returning.
Information
WARNING
If you have any confusions or are not quite sure about the installation, please do not hesitate to ask for our help.
Before assembly, please check and make sure all necessary accessories are included and undamaged. Improper installation (including not properly following the indicated instructions or cautions /attentions), such as use the product for monitors over its load capacity or for any purpose not explicitly specified, may cause damage or serious injury. We would not be liable for any damage or injury caused by improper mounting or inappropriate use. The kit contains small items that could be choking hazards if swallowed. Please keep them OUT OF REACH OF CHILDREN UNDER 3 YEARS OLD. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
NOTE: Not all hardware included will be used.
DO NOT EXCEED WEIGHT CAPACITY.
ASSEMBLY STEPS
Warm Tips: You could also refer to the Video Guide about installation on our product page.
STEP 1: Pole Installation
- Use the 5mm Allen Key (I) to tighten the pre-assembled screws into the pole (D) from the bottom of the base (C).
STEP 2: Arm Installation
- Install wire clip (E) and swivel arm (B) to the pole (D).
- Attached the wire clips (F) to the swivel arm (B). Fasten the bolt with supplied Allen Key.
STEP 3: Attach Monitor
OPTION A: Flat Back Monitor
- Attach the VESA plate (A) to the back of monitor and secure it by using a 5 mm Allen Key ( I ) to tighten screws (Ⅰ).
Warning: Do not tighten the screws excessively or your monitor might be damaged.
OPTION B: Curved Back Monitor
- Attach the VESA plate (A) to the back of monitor and secure it by using a 5 mm Allen Key ( I ) to tighten screws (Ⅱ) along with spacers ( Ⅲ).
Warning: Do not tighten the screws excessively or your monitor might be damaged.
STEP 4: Hang Monitor
- Slide the monitor onto the head of swivel arm (B).
- Install the plastic cover (G) and pre-assembled security bolt (B1). Tighten the bolt with the supplied 5mm Allen key (I).
- Make sure the pre-assembled security bolt (B1) is installed before you rotate the monitor.
STEP 5: Tilt Adjustment
Problem
- If monitor face down
Solution
- Loosen the tilting bolt.
- Hold the bottom of monitor with one hand and adjust to determine your desired tilt angle.
- Retighten the tilting bolt to fix the intended angle.
STEP 6: Cable Management
- Manage cables and store Allen keys (H,I,J) in wire clip (E) for future use.
Adjust as Desired
- Adjust monitor position and rotation.
- For minor height adjustment, turn the plastic cover (G) with the supplied 6mm Allen Key (J) to raise or lower the monitor. Ignore this step if the two monitors are level.
Warning
Product Dimensions
MAINTENANCE
CAUTION AND MAINTENANCE
- Never allow children to climb, stand, hang, or play on any part of monitor or stand.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
- Check that the bracket is secure and safe to use at regular intervals (at least every three months).