Progress P300448-009-CS Phase 5 Collection 16 Inch Brushed 3CCT Integrated LED Linear Instruction Manual

: May 15, 2024
: PROGRESS

Table of Contents

Progress P300448-009-CS Phase 5 Collection 16 Inch Brushed 3CCT
PACKAGE CONTENTS
Safety Information And Preparation
Care and Maintenance
Assembly Instructions
FCC STATEMENT
Contact
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Progress P300448-009-CS Phase 5 Collection 16 Inch Brushed 3CCT

Integrated LED Linear

Progress-P300448-009-CS-Phase-5-Collection-16-Inch-Brushed-3CCT-
Integrated-LED-Linear-product

PACKAGE CONTENTS

Progress-P300448-009-CS-Phase-5-Collection-16-Inch-Brushed-3CCT-Integrated-
LED-Linear-fig-1

Progress-P300448-009-CS-Phase-5-Collection-16-Inch-Brushed-3CCT-Integrated-
LED-Linear-fig-6

HARDWARE CONTENTS (not actual size)

Progress-P300448-009-CS-Phase-5-Collection-16-Inch-Brushed-3CCT-Integrated-
LED-Linear-fig-2

Safety Information And Preparation

Safety Information

Please read and understand this entire manual before attempting to assemble, operate or install the product.

CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation.
CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
WARNING: If any Special Control Devices are used with this fixture, follow instructions carefully to assure full compliance with
N.E.C. requirements. If there are any questions, contact a qualified electrical contractor.
CAUTION: All glass is fragile. Use care when handling glass shades and bulbs.

Preparation

Before beginning installation, make sure all parts are included using the contents diagrams from page 1. If any part is missing or damaged, do not attempt to assemble, install or operate the product.
Estimated assembly time: 30 minutes.
Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.

Care and Maintenance

Shut off main power supply before cleaning product or changing light bulbs.
To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.

Assembly Instructions

Progress-P300448-009-CS-Phase-5-Collection-16-Inch-Brushed-3CCT-Integrated-
LED-Linear-fig-3

The back plate (AA) comes assembled inside the canopy. First, detach the backplate from the canopy by removing the screws (CC). Make sure to save the screws for step 3.
- Then attach the back plate onto the outlet box using the mounting screws supplied with the outlet box (not included).
Strip 3/8″ of insulation from the electrical wire ends. Using wire nuts (BB), connect white fixture wire to the white supply wire from the outlet box; connect the fixture black wire to the black supply wire.
- Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the back plate. Push all wire connections into the outlet box.
Attach fixture (A) to back plate (AA) using flat head screws (CC) to secure tightly.
Use CCT switch to select either 3000K, 4000K or 5000K setting.

Assembly and Installation Instructions

Caution: Read instructions carefully and turn off power at central circuit breaker before starting the installation.

CAUTION: Read instructions carefully and turn off power at central circuit breaker before beginning installation.
WARNING: Fire hazard. Min 90°C power conductors. Consult a qualified electrician to ensure proper good branch circuit conductor.
WARNING: If there are other regulating mechanisms used with this device, carefully follow instructions for meeting NEC requirements. If you have any questions, consult a qualified electrician.
CAUTION: Glass is always fragile; Handle the component(s) and/or bulb(s) with care.

THIS PRODUCT MUST BE INSTALLED ACCORDING TO THE RELEVANT INSTALLATION CODE, BY A PERSON WHO KNOWS THE PRODUCT AND ITS OPERATION WELL AS WELL AS THE INHERENT RISKS. SAVE THESE INSTALLATION INSTRUCTIONS.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: following measures

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.