ALOGIC L10KPBWH 4 In 1 Wireless Charging 10000mAh Power Bank User Manual
- June 16, 2024
- ALOGIC
Table of Contents
LIFT 10000mAh POWER BANK
WITH 4-IN-1 WIRELESS CHARGER
ALOGIC Lift 4 in 1 Wireless Charging 10000mAh Power Bank
L10KPBWH 4 In 1 Wireless Charging 10000mAh Power Bank
Model: L1O0OKPBWH
User Manual
Package Contents
-
Lift 1000OmAh Power Bank with 4 in 1 Wireless Charger
-
USB-C to USB-C Cable
-
Magnetic Ring
-
Alignment Tool
-
User Manual
-
MagSafe Charging Surface
-
Apple Watch Charger
-
Kickstand
-
LED Indicator
-
USB-C Port
-
USB-A Port
-
Power Button
Specifications
| Model | L1OKPBWH |
|---|---|
| Dimensions | 108 x 24 x 68mm (Hx Dx W) |
| Weight | 229 g |
| Output | USB-C: 5V/3A, 9V/2A, 12V/1.5A |
USB-A: 5V/3A, 9V/2A, 12V/1.5A
Wireless Charger: 15¥/ (Max)
Apple Watch Charger: 3W (Max)
Input| USB C DC 5V/3A, 9/2A
Warranty| 2 Year
Troubleshooting
| Symptom | Solution |
|---|---|
| Wireless device does nol commence charging | If you use 4 case, check if the |
case is MagSafe compatible.
Ensure your dev’ce and case are MagSafe compatible
Viireless device stops charging before fully charged| Check power bank battery
level by pushing tre power button. Charge power ban< if battery level is low.
Thick cases can irrertere with wireless charging — * using a case, try
removing your device fron the case while charg’ng
Warnings
- This device uses inductive charging. Do not place metallic objects (eslce from devices wrich susport wireless charging) on top of the charging pad.
- Avoid placing phone cases which include metellic elements on the charger. In rare cases it may not be sossible to detect smaller metallic oajects, such as foil logos on phone cases, and the charger ney con-inue to operate. In these cases, the mecallic object wll heat up and may cause gradual darrage to the device being charged.
- Do not celibeetely datnaye the devce or expose it to damp, direct sunlight, cr high tempcrature conditiors.
- It is normal tor the device to be slightly warm to touch curing operation. Provide adecate ventilation erd do not cover the device while in operétion.
- Disassembling o- falling to properly use and care for your device wil void the warranty on the product.
- Do not use the product if it becories datnaged as this could pose a lisk of causing damage to connected devices.
- ALOGIC bears 10 responsiblity for demage to the device or ircicental damages arising fron improper Use or lack of care. ALOGIC will not be held lable for repalr or replacemert of the device or olher damages in Lhese circumstances.
| LED status | Device Behavior |
|---|---|
| White LEDs | Powered on/ Ballery level |
Charging (when flashing)
All Lights Flashing| Mctal on abrormal object detected
Solid Blue| wireless charging in operation
Off| Power off
- If your Qi-compatible phone or case is not MagSafe compatible, use the included magnetic ring to add MagSafe compatibility to your device. Refer to the alignment tool included with the magnetic ring.
FCC Compliance Statement
This dev’ce co plies with Part 15 of the FCC Rules. Operation is subject to che following two conuitio 1s:
- tais device ney not cause larniful interference, and
- this device inust accept any interference received, including interference that may cause Undesired operation.
Crangces or modifications not expressly approved by the party responsiok: for
compliarce could void the user’s authority to operate the equipme part.
This equipment has been tested and tound to comply with the limits fo- a Class
B dig’tal device, pursuant to Part 15 of tae FCC Rules. These limits ae
dasigred ta provide reasonable protection against harmful interference i714
residential installation. This equipmert generates, uses erd ¢an radiate radio
frequency energy and, if not installed and used in acco dance wth the
instructions, may cause Farmful interference to radio comnunicalions. However,
lhere is no guarantee Lhal inter erence will nat occur in a particular
installation.
If tris equisment does cause ha mful ‘rlerference lo radio or television
reception, which ca1 be determined by lurning the equipment of and on.
The user is encouraged to try to correct the ‘trerferetice by one or riore of
the following measures:
- Reorie it or relocate the receiving autenna.
- Increase the separation between tre equipment and receiver.
- Connect the cquipment ‘no an outict on é circuit different from thet to which the receiver is connected.
- Consult the dealer or an experienced radio/TV techy cian for helo.
FCC Radiation Exposure statement
The device has been evalualec lo mieel genera RF exposure requireme rl. The
device can be used in porlable exposcre cordilion without restriction.
Responsib e Pa ly – U.S. Contact Infor mation
ALOGIC USA LLC
3/30 Parish Ave
Fremont CA ¥4536 USA
EU Declaration of Conformity
Hereby, ALOGIC Co-po-ation declares that this product is in comp ‘anen with
Directive 2014 53/EU.
The tull text of the EU declaratior of conformity is availatle at the
following interret add-ess by clicking on the Compliarce Documentation link:
www.alogic.co
Innovation, Science and Economic Development Canada Statement (ISED)
This device complies with RSS-716 of the Industry Canada Ru es. Opection is
subject to the following two conditions:
- This device tney het cause inteference.
- This device must accept any interfurcnce, inc udirg interference that may cause undesired opcrazion of the device.
Radiation Exposure Statement:
The product complies with the Canada portable RF Exposure I’mit set forh
‘or an lrcont folled environment and Is safe for Intended operation as
described in this matual. Further RF exposure reduction can be achieved if the
procuclt can be kepl as far as possible fom the user’s body or the device ‘s
set toa lower output sower if such a furction is available.
This digital apparatus compl’cs with CAN ICES-003(BYNMB-003 (B]
Designed in Australia.
Manufactured in China