ALOGIC MagSpeed 3-in-1 Wireless 15W Charging Station User Guide

October 30, 2023
ALOGIC

ALOGIC-LOGOALOGIC MagSpeed 3-in-1 Wireless 15W Charging Station

PACKAGE CONTENTS

ALOGIC-MagSpeed-3-in-1-Wireless-15W-Charging-Station-
FIG-1

  1. MagSpeed 3-in-1 Wireless 15W Charging Station
  2. USB-C to USB-C Cable (1m)
  3. User Manual

OVERVIEW

ALOGIC-MagSpeed-3-in-1-Wireless-15W-Charging-Station-
FIG-2

  1. MagSafe Compatible Wireless
  2. Wireless charging pad
  3. LED Indicator
  4. Apple Watch Charger
  5. USB-C Connector

HOW TO USE

ALOGIC-MagSpeed-3-in-1-Wireless-15W-Charging-Station-
FIG-3

Specifications

  • Mode: MSP31CS15W MSP31SL15W
  • Dimensions : 92mm x 102mm x 172mm (L x W × H)
  • Weight: 438g
  • Material: ABS & Aluminium
  • Output: MagSafe Wireless Charging (15W Max) Wireless Charging (5W Max) Apple Watch Charger (5W Max)
  • Input: USB-C DC 9V/3A (Max), 12V/3A (Max)

Charging MagSafe Compatible and wireless charging devices (Refer to the images on the previous pages)

  1. Connect the available USB-C cable into the JSB-C port 5) and connect the other end into a power source.
  2. Mount your MagSafe Compatible iPhone by placing it on the centre of the top charging pad 1. The integrated magnet will align itself to the phone once it has attached to the MagSafe Wireless Charging pad.
  3. Place your AirPods/Pro devices on the Wireless charging shown in the diagram below
  4. Connect your Apple Watch to the watch charging module vertically aligned with the base. ALOGIC-MagSpeed-3-in-1-Wireless-15W-Charging-Station-FIG-13 ALOGIC-MagSpeed-3-in-1-Wireless-15W-Charging-Station-FIG-12

Warnings

  • This device uses inductive charging. Do not place metallic objects (aside from devices which support wireless charging) on top of the charging pad. Avoid placing phone cases which include metallic portions on the charger. In rare cases it may not be possible to detect smaller metallic objects, such as foil logos on phone cases, and the charger may continue to operate. In these cases the metallic object will heat up and may cause damage to the device being charged over time.
  • This device is designed for indoor use only.
  • Do not deliberately damage the device or expose it to damp, direct sunlight,or high temperature conditions. It is normal for the device to be slightly warm to touch during operation. Provide adequate ventilation and do not cover the device while in operation.
  • Disassembling or failing to properly use and care for your device will void the warranty on the product.
  • Do not use the product if it becomes damaged as this could pose a risk of causing damage to connected devices.
  • ALOGIC bears no responsibility for damage to the device or incidental damages arising from improper use or lack of care. ALOGIC will not be held liable for repair or replacement of the device or other damages in thesecircumstances.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one of more of the following measures:
Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Responsible Party – U.S. Contact Information

  • ALOGIC USA LLC
  • 3730 Parish Ave
  • Fremont CA 94536 USA

EU Declaration of Conformity

  • Hereby, ALOGIC Corporation declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address by clicking on the Compliance
  • Documentation link at: www.alogic.co.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals