ALOGIC Corporation Pty Ltd 2ATCA-JUT10 JUT10 AXIE 10500mAh Global Charger and Power Bank User Manual

ALOGIC Corporation Pty Ltd 2ATCA-JUT10 JUT10 AXIE 10500mAh Global Charger

and Power Bank

Package Contents

1. Axie 10500mAh Global Charger & Power Rank with Braided Cable
2. EU+UK+AU Plugs
3. magnetic  Ring
4. Travel bag

1. US in plugs
2. Magsafe Wireless charging base
3. Power button
4. USB-C plug
5. Cable clip with magnets
6. Braided charging cable
7. Led indicator
8. USB-C port

Specifications

• Model  JUTIOWH JUTIOXX (XX represents color) |

• Dimensions  91 (L) × 91 (w) x 35 (H) mm

• Weight 366 gms

• Material ABS

• Input USB-C DC 5V/3A 9V|3A 12v/2.92A 15V /2.33A 20v/1.75A AC 30W Max

• Output
  USB-C under AC mode: PD 30W Max
  USB-C Power Bank Mode: PD 35W Max

• Wireless Output: 15W Max

• Warrant 1 year

Device setup

• Choose the suitable plug

• Recharge battery by plugging into a power outlet

• Or recharge battery via shown USB-C Port
• Use in Power Bank Mode
• Use in Wall Charger Mode (Wireless Charger not available in this mode)

Instructions

Refer to the images on the previous pages.

Device Set Up

1. Choose the suitable plug

2. Plug into Power Outlet.

3. Or recharge to 100% via USB-C.
   Use in Power Bank Mode

4. Plug in up to two USB-C devices to charge with up to 20W power.

5. Press power button to turn on the power bank, place your wireless charging enabled phone to start charging wirelessly with up to 15W power.
   Use in Wall Charger Mode

6. Plug in up to two USB-C devices to charge with up to 30W power.

LED light status

• Solid blue Wireless charging in operation
• White  Pressing power button, will show current battery level
• Flashing  Metal or abnormal objects detected
• Off  Power off
• If your Qi-compatible phone or case is not MagSafe compatible, use the included magnetic ring to add MagSafe compatibility to your device. Refer to the alignment tool included with the magnetic ring.

Troubleshooting

Warnings

• This  device uses Inductive  charging . Do not place metallic objects aside from devices. which support wireless charging) on top of the charging pad.
• Avoid  placing  phone cases which include metallic portions on the charger, in rare . cases it may not be possible to detect smaller metallic objects, such as foil logos on phone cases, and the charger may continue to operate. In these cases, we metallic object will heat up and may cause damage to the device being charged over time.
• Do not deliberately damage the device or expose it to damp, direct sunlight, or high temperature conditions.
• It is normal tor the device to be slightly worm to touch during operation, Provide adequate ventilation and do not cover  the device while in operation.
• Disassembling or failing to properly use and care for your device will void the warranty on the product
• Do not use the product it it becomes damaged as this could pose a risk of causing damage to connected devices
• Journey bears no responsibility for damage to the device or incidental damages arising from improper use of lock of core. Journey  will not be held  liable for repair or replacement of the device or other damages in these circumstances.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

IC Caution
Radio Standards Specification RSS-Gen, issue 5

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

• This device may not cause interference.
• This device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Responsible Party – U.S. Contact Information
ALOGIC USA LLC
3730 Parish Ave
Fremont CA 94536 USA

JOURNEY
C JOURNEY. All rights reserved. Reproduction in whole or in part without permission is prohibited. All other trademarks are the properties of their owners.
JOURNEY is the trademark of ALOGIC Corporation

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>