ALOGIC MagSpeed 2-in-1 Wireless 15W Charging Station User Guide

June 2, 2024
ALOGIC

ALOGIC MagSpeed 2-in-1 Wireless 15W Charging Station

Package Contents

alogic magspeed 2-in-1 wireless 15w charging station-1

  • MagSpeed 2-in-1 Wireless 15W Charging Station
  • USB-C to USB-C Cable (1m)
  • User Manual

OVERVIEW

alogic magspeed 2-in-1 wireless 15w charging station-2

MagSafe Compatible Wireless Charging Station
Wireless charging pad
LED Indicator
USB-C Connector

INSTRUCTION

alogic magspeed 2-in-1 wireless 15w charging station-3

Specifications

Model                  MSP21CS15W
Dimensions        92 x 102 x 156mm (Lx WxH)
Weight                77g
Material              ABS & Aluminium
Output               MagSafe Wireless Charging (15W Max) Wireless Charging (5W Max)
Input                 USB-C DC 9V/3A (Max), 12V/3A (Max)
Warranty          2 Years

Warnings

This device uses inductive charging. Do not place metallic objects (aside from devices that support wireless charging) on top of the charging pad.
Avoid placing phone cases that include metallic portions on the charger. In rare cases, it may not be possible to detect smaller metallic objects, such as foil logos on phone cases, and the charger may continue to operate. In these cases, the metallic object will heat up and may cause damage to the device being charged over time.

This device is designed for indoor use only.
Do not deliberately damage the device or expose it to damp direct sunlight or high-temperature conditions.
It is normal for the device to be slightly warm to touch during operation. Provide adequate ventilation and do not cover the device while in operation.
Disassembling or failing to properly use and care for your device will void the warranty on the product.
Do not use the product if it becomes damaged as this could pose a risk of causing damage to connected devices.
ALOGIC bears no responsibility for damage to the device or incidental damages arising from improper use or lack of care. ALOGIC will not be held liable for the repair or replacement of the device or other damages in these circumstances.

ALOGIC Speed 2-in-1 Wireless 15WCharging Station integrates powerful wireless charging with a minimalistic, modular design Suited for any home or workspace. Our magnetic wireless charger allows you to effortlessly mount your Magsafe Compatible device and charge instantly. The angled magnetic charger holds your device at a convenient angle to view the screen, whether horizontally or vertically. The bottom wireless charger allows you to charge your AirPods/AirPods Pro devices as well.

Charging MagSafe Compatible and wireless charging devices
(Refer to the images on the previous pages)

  1. Connect the available USB-C cable to the USB-C port and connect the other end to a power source.
  2. Mount your Magsafe Compatible iPhone by placing it on the center of the top charging pad. The integrated magnet will align itself to the phone once it has been attached to the MagSafe Wireless Charging pad.
  3. Place your AirPods/Pro devices on the wireless charging pad as given in the image below
  4. Compatible devices can be charged either together or separately

Understanding the LED lights and their meanings

alogic magspeed 2-in-1 wireless 15w charging station-5

Troubleshooting

alogic magspeed 2-in-1 wireless 15w charging station-6

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.
    Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Responsible Party – U.S. Contact Information

ALOGIC USA LLC
3730 Parish Ave
Fremont CA 94536 USA

EU Declaration of Conformity
Hereby, ALOGIC Corporation declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address by clicking on the Compliance Documentation link at: www.alogic.co

Designed in Australia. Manufactured in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals