Lindy 38368 4K HDMI eARC Extractor User Manual
- June 16, 2024
- LINDY
Table of Contents
Lindy 38368 4K HDMI eARC Extractor
Product Information
Specifications
- Maximum supported audio sample rate: 192KHz
- Input impedance: 100
- Output impedance: 100
- Output voltage: 5V 1A
- Power consumption: 2W
Features
- Extracts stereo or multi-channel audio
- CEC and high bit rate audio
- Supports resolutions up to 4096×2160@60Hz 4:4:4 8bit / 4:2:2 12bit
- Supports HDR formats: HDR10, HDR10+ and Dolby Vision
- Supports HDCP 2.2
Package Contents
- 1x 4K HDMI eArc Extractor
- 1x USB Cable (USB A to Micro USB)
- 1x User Manual
Introduction
Thank you for purchasing the 4K HDMI eARC extractor. This product has been designed to provide trouble-free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.
Installation
- Ensure all devices are powered off before connection. Once the USB power cable is connected the Power LED will illuminate.
- Connecting the following HDMI cables:
- Out1: Connect a HDMI cable to your HDMI eARC port on the display.
- Out2: Connect a HDMI to your Sound system (AV Receiver or soundbar).
- Input: Connect a HDMI cable to your required source device.
- Configure the dip switches on the unit to control EDID and audio extraction.
Dip Switch Configuration
| Name | Function |
|---|---|
| eARC | This switch is used to turn off/on the eARC function. ON |
position, the Out2 port will switch output the eARC/ARC audio; OFF
the Out2 port will output audio from the HDMI IN port.
EDID switch| This switch is used to select EDID: OUT1 position will take the
audio EDID block from the display connected to OUT1; OUT2 position
will take the audio EDID block from the display connected to OUT2.
Video EDID block will always be taken from OUT1. If the copy fails,
the unit will use an internal EDID of 1080p 2Channel audio.
Troubleshooting
- No signal: Please ensure that all cables are connected.
- No audio: Please ensure that the correct dip switch has been selected.
- No audio: Please make sure that you have connected your HDMI cable to the eARC/ARC on the display.
FAQ
Q: What is the maximum supported audio sample rate?
A: The maximum supported audio sample rate is 192KHz.
Q: What are the supported HDR formats?
A: The supported HDR formats are HDR10, HDR10+ and Dolby Vision.
Q: Does it support HDCP 2.2?
A: Yes, it supports HDCP 2.2.
Introduction
Thank you for purchasing the 4K HDMI eARC extractor. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference. The Lindy 4K HDMI eARC Extractor allows users to seamlessly extract digital audio from an HDMI Source or HDMI eARC displays, while sending the video signal to a 4K UHD display. This is a perfect solution for separating audio signals too your AV Receiver or sound bar.
Package Contents
- 1x 4K HDMI eArc Extractor
- 1x USB Cable (USB A to Micro USB)
- 1x User Manual Features
- Extracts stereo or multi-channel audio
- CEC and high bit rate audio
- Supports resolutions up to 4096×2160@60Hz 4:4:4 8bit / 4:2:2 12bit
- Supports HDR formats: HDR10, HDR10+ and Dolby Vision
- Supports HDCP 2.2
Specification
- Maximum supported audio sample rate: 192KHz
- Input impedance: 100Ω
- Output impedance: 100Ω
- Output voltage: 5V 1A
- Power consumption: 2W
Installation
- Ensure all devices are powered off before connection. Once the USB power cable is connected the Power LED will illuminate.
- Connecting the following HDMI cables
- Out1: Connect a HDMI cable to your HDMI eARC port on the display.
- Out2: Connect a HDMI to your Sound system (AV Receiver or soundbar).
- Input: Connect a HDMI cable to your required source device.
- Configure the dip switches on the unit to control EDID and audio extraction.
| Name | Function |
|---|
eARC
switch
| This switch is used to turn off/on the eARC function. “ON” position, the
Out2 port will output the eARC/ARC audio; “OFF” the Out2 port will output
audio from the HDMI IN port.
EDID
switch
| This switch is used to select EDID: “OUT1” position will take the audio EDID block from the display connected to OUT1; “OUT2” position will take the audio EDID block from the display connected to OUT2. Video EDID block will always be taken from OUT1. If the copy fails, the unit will use an internal EDID of 1080p 2Channel audio.
Troubleshooting
- No signal: Please ensure that all cables are connected.
- No audio: Please ensure that the correct dip switch has been selected.
- No audio: Please make sure that you have connected your HDMI cable to the eARC/ARC on the display.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic
Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process. Each individual EU
member state, as well as the UK, has implemented the WEEE regulations into
national law in slightly different ways. Please follow your national law when
you want to dispose of any electrical or electronic products. More details can
be obtained from your national WEEE recycling agency.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modification not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Hersteller / Manufacturer (EU):.
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: info@lindy.com , T: +49 (0)621 470050
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
sales@lindy.co.uk , T: +44 (0)1642 754000
Tested to comply with FCC standards.
For home and office use.
No. 38368
2nd Edition, July 2023 lindy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>