Aerpro AM2CAM Reverse Camera Input Switch Harness Suit User Guide
- June 16, 2024
- Aerpro
Table of Contents
Aerpro AM2CAM Reverse Camera Input Switch Harness Suit
Product Information
Specifications
- Camera Type: AM2CAM
- Power Supply: 12V
- Power Consumption: 3.3V
- Audio-Video Lead: 18-pin
Product Usage Instructions
Installation Diagram
Refer to the following installation diagram for setting up the AM2CAM:
Step 1 – Camera Connection
Connect the Camera 2 (CAM2) to the AM2CAM device using the provided harness
or an ignition-powered camera. Follow these steps:
- Connect the R Camera Out cable from the AM2CAM to the Camera In port.
- Connect the Camera Ground cable to the respective ground terminal on both the AM2CAM and the camera.
- Connect the R Camera 12V+ cable from the AM2CAM to the camera’s power supply.
Step 2 – Audio-Video Connection
Connect the AM2CAM to your audio-video system using the provided 18-pin
lead. Follow these steps:
- Insert one end of the 18-pin lead into the corresponding port on the AM2CAM.
- Connect the other end of the lead to your audio-video system.
AM2CAM INSTALLATION DIAGRAM
If your factory (or aftermarket) reverse camera is powered on the ignition and
you would like to use the second camera input on your AM9X/AM10X then you will
require an AM2CAM Input Switch Harness. The AM2CAM will only be required if
you would like to add a second camera to the vehicle. This is only applicable
to AM9X/10X units with the two-camera input support. You can check if your
head unit supports this by checking if you have two icons for Camera R and
Camera 2 on the home screen of the head unit.
To correctly utilize dual cameras for this head unit, connections to the
AM2CAM are as follows:
- Factory Camera Retention RCA to R Camera In RCA on AM2CAM
- AM2CAM Camera Ground Cable (Black) to Camera Ground (Black) on 18 Pin Audio-Video Lead
- AM2CAM R Camera 12V+ (Red) to R Camera 12V+ (Red) on 18 Pin Audio-Video Lead
- AM2CAM Power 3.3v (Yellow) to RX on Audio-Video Lead (White)
- Second Camera 12V+ connected to Camera 2 12V+ (Yellow) on 18 Pin Audio-Video Lead
- Second Camera RCA connected to CAM2 RCA on 18 Pin Audio-Video Lead
FAQ
User Guide
AM9X, AM10X, AM2CAM Reverse Camera Input Switch Harness Suit, AM2CAM, Reverse
Camera Input Switch Harness Suit, Camera Input Switch Harness Suit, Input
Switch Harness Suit, Switch Harness Suit, Harness Suit, Suit
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>