belkin K7SWIZ021 BoostCharge Pro 2 in 1 Magnetic Charging Pad User Manual
- June 16, 2024
- belkin
Table of Contents
belkin K7SWIZ021 BoostCharge Pro 2 in 1 Magnetic Charging Pad
Product Information
Specifications
- Model: WIZ021
- Input Power Supports PD: 9V3A
- Output Power Maximum: 15W (MPP Qi2), 10W (MPP Qi2), 5W (BPP AirPods)
- Number of Outputs: 1 (MPP Qi2), 2 (MPP Qi2), 3 (PD 5V)
- USB-C Support: Yes, for some outputs
Product Usage Instructions
Placement
Place the BoostCharge Pro 2-in-1 Magnetic Charging Pad on a flat and stable
surface. Ensure that there is a minimum distance of 20 cm between the radiator
and your body when in use.
Power Connection
Connect the power supply to the BoostCharge Pro using the provided cable.
Plug the other end of the cable into a power socket.
Charging Devices
To charge devices, follow these steps:
- Ensure that your device is compatible with wireless charging or has a wireless charging case.
- Place your device on the BoostCharge Pro’s charging pad, aligning it with the charging symbol.
- Verify that your device starts charging. The LED indicator on the BoostCharge Pro will light up to indicate charging status.
Charging Multiple Devices
If your BoostCharge Pro has multiple outputs, you can charge multiple
devices simultaneously:
- Connect each device to a separate output port on the BoostCharge Pro.
- Ensure that each device is properly aligned with its corresponding charging pad.
- Verify that all devices start charging. The LED indicators on the BoostCharge Pro will light up to indicate the charging status for each device.
Troubleshooting
If you experience any issues with the wireless charger, please follow these
steps:
- Discontinue the use of the wireless charger.
- Unplug the power supply from the socket.
- Contact Belkin customer support for assistance.
FAQ
-
Q: What factors can affect the charging performance?
A: The charging performance can be influenced by factors such as proprietary charging protocols, ambient temperature, current battery percentage level, and device age. -
Q: Where can I find regulatory and sustainability information?
A: The regulatory and sustainability information can be found on the bottom of the device or on the Belkin website at www.belkin.com/doc. -
Q: What should I do if I encounter interference or compliance issues?
A: If you experience interference or compliance issues, discontinue use, unplug the power supply, and contact Belkin for assistance. Any changes or modifications not approved by the responsible party may void the user’s authority to operate the equipment.
Safety Instructions
WARNING:
Failure to follow these instructions could result in fire, electric shock,
injury, or damage to the user, product, or other property.
- Connect the power supply of the wireless charger into a power outlet that is close by and is easy to disconnect from.
- Use indoors and in a dry location only; Avoid charging near sources of heat or humidity.
- Keep the wireless charger and power supply away from any liquids or moisture.
- Unplug the wireless charger when not in use for long periods of time.
- Do not store your device in very hot or very cold locations. It is recommended to use your device at room temperature.
- Do not use if visible defects are observed on the wireless charger or power supply.
- Do not attempt to service, modify, or disassemble the wireless charger or power supply.
- Use of a power supply not recommended or sold by Belkin may result in an increased risk of fire, electric shock, injury, or damage to the user, product, or other property.
- Wireless charging power transmission rate is regulated by the wireless charging device receiving power which can be influenced by factors like, but not limited to, proprietary charging protocols, ambient temperature, current battery percentage level and age of the device being charged.
CAUTION:
If you experience problems with the wireless charger, please discontinue use,
unplug the power supply from the socket, and contact Belkin for assistance.
The marking information is located on the bottom of the apparatus.
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC
COMPATIBILITY
We, Belkin International, Inc., of 555 S. Aviation Blvd., Suite 180, El
Segundo, CA 90245, USA, Tel: +1(310) 751 5100, declare under our sole
responsibility that this product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body.
Innovation, Science, and Economic Development Canada Statement (ISED):
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body.
Innovation, Science and Economic Development Canada Statement:
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
CAUTION:
If you experience problems with the wireless charger, please discontinue use,
unplug the power supply from the socket, and contact Belkin for assistance.
The marking information is located on the bottom of the apparatus.
Power Distribution
Declaration Of Conformity
CE Declaration of Conformity
We, Belkin International, Inc., declare that the radio equipment complies with
the Radio Equipment Directive 2014/53/EU, RoHS Directive 2011/65/EU +
2015/863, and WEEE Directive 2012/19/EU.
- The full text of the EU Declaration of Conformity is available at the following Internet address: www.belkin.com/doc.
- Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
- Radiation Exposure Statement: This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
- Frequency band in which the radio equipment operates: 127.7 kHz, 360 kHz, 111-148 kHz
- Maximum power transmitted: -18.92 dBμA/m @10m
UKCA Conformity:
We, Belkin International, Inc., declare that the radio equipment complies with
Radio Equipment Regulations 2017, RoHS Regulations 2012, and WEEE Regulations
2013.
The full text of the UKCA declaration of conformity is available at the following Internet address: www.belkin.com/doc.
Recycling programs for this packaging may not exist in your area.
Waste Electrical and Electronic Equipment Directive
For information on product disposal, please refer to http://www.belkin.com/uk
/weee-regulations/ under and following Article 14 of the Directive 2012/19/EU
of the European Parliament on waste in electrical and electronic equipment
(WEEE).
- The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.
- Therefore, any product that has reached the end of its useful life must be given to waste disposal centres specializing in separate collection of waste electrical and electronic equipment or given back to the dealer when purchasing a new WEEE, under and per Article 14 as implemented in the country.
Specification
Contact Information
- Belkin International, Inc. El Segundo, CA 90245, USA
- Belkin Ltd., Unit 1, Regent Park, Booth Drive, Wellingborough, Northants NN8 6GR, United Kingdom
- Belkin B.V., Herikerbergweg 106, Plaza Arena – Jupiter, 1101 CM, Amsterdam, The Netherlands
- Belkin Asia Pacific Ltd. Hong Kong
- Belkin Ltd. Tuggerah, Australia
- japansupport@belkin.com
- Belkin Tech Support: www.belkin.com/support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>