ORTECH 4110-3CCT, 4112-3CCT, 4116-3CCT LED Flush Mounts Instruction Manual

ORTECH 4110-3CCT, 4112-3CCT, 4116-3CCT LED Flush Mounts

WARNING

WARNING — THE INSTALLATION MUST BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

1. LED Flush Mounts are suitable for using in damp locations
2. Please keep the LED Flush Mounts away from any corrosive substance, and please use dry cloth when you clean it
3. LED Flush Mounts can only be installed by a qualified electrician
4. Before installation or maintenance, please disconnect the power to prevent electric shock

Application Notice

1. Turn OFF the power supply at the fuse or circuit breaker box before you install the fixture
2. Ground the fixture to avoid potential electric shocks and to ensure reliable starting
3. Double-check all connections to be sure they are tight and correct
4. Wear rubber soled shoes and work on a sturdy wooden ladder
5. This fixture is designed for use in a circuit protected by a fuse or circuit breaker. The fixture is also designed to be installed in accordance with local electrical codes. If you are unsure about your wiring, consult a qualified electrician or local electrical inspector, and check your local electrical code
6. WARNING — RISK OF CUTS: Some metal parts in the fixture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts
7. WARNING — RISK OF FIRE: Use 120V AC 50/60Hz circuits
8. DO NOT change the LED light source or driver inside under any circumstance
9. DO NOT cover the fixture with any heat insulated materials

CAUTION

1. WARNING: Risk of fire.
2. Before installing your lighting fixture, thoroughly review enclosed installation manual. If you do not have sufficient electrical wiring experience, please refer to a do-it-yourself wiring handbook or have your fixture installed by a qualified licensed electrician. All electrical connections must be in a accordance with local standards. Reliable operating temperature is -20 to +40 degrees.
3. Please obey fire prevention regulations, do not cover the fixture with any heat insulated materials.
4. Do not change the LED light source or driver inside under any circumstance.

INSTALLATION GUIDE

Surface Mounting Installation

1. Disconnect electrical power and fix the bracket on the J-box
2. Connect the input line with the lamp

3. Push the light to the mounting bracket and rotate in the direction of the arrow to make the light body fixed tightly with the bracket
4. Restore power and test if lamp works

ORTECH reserves the right to modify at any time, without notice, any or all of our product’s features, designs, components and specifications to meet market changes.

• info@ortechindustries.com
• www.ortechindustries.com
• 13376 Comber Way Surrey BC V3W 5V9 375 Admiral Blvd Mississauga, ON L5T 2N1
• 1-888-543-6473
• 1-888-541-6474

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>