JL Audio M6100CTCS3GW 1 Inch M6 Marine Component Tweeters Instruction Manual
- June 16, 2024
- JL AUDIO
Table of Contents
JL Audio M6100CTCS3GW 1 Inch M6 Marine Component Tweeters Instruction
Manual
INSTRUCTION
IMPORTANT:
- Installation requires appropriate tools and safety equipment. Professional installation is recommended.
- This product is water-resistant. Do not submerge or subject to high-pressure water spray.
- Before installation, turn off the audio system and disconnect the battery system from the audio system.
- Before cutting or drilling, check for potential obstacles behind mounting surfaces.
- Do not mount this product in an engine compartment or other area of extreme heat.
- Mount this product securely to prevent damage or injury in severe conditions.
- Wash with mild soap and rinse with freshwater only.
WARNING
Listen to your audio system at levels appropriate for operating conditions and hearing safety.
DIMENSION
| M6-100CT
---|---
| 1.00 in / 25 mm
| 75 W
| 10 – 75 W
| 91.0 dB @
| 4.8 KHz – 25 KHz ± 3 dB
| 4
Product images shown are for illustrative purposes only and may differ from the actual product. Due to continuous product development, all specifications are subject to change without notice.
What In The Box
Dimension
CONENNCTION
WARNING! These tweeters must be used with an appropriate high-pass crossover filter, like those supplied in this kit, or actively filtered: 24 dB/octave (Butterworth) at 3,200 Hz. Failure to use an appropriate filter will result in damage or failure of the product and will NOT be covered under warranty.
INSTALLATION INSTRUCTION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>