DODGE DPFSV1 OPTIFY Performance Sensor Instruction Manual
- June 9, 2024
- DODGE
Table of Contents
DODGE DPFSV1 OPTIFY Performance Sensor
OPTIFY™ Performance Sensor Model: DPFSV1
Installation Instructions Review these instructions in their entirety before
attempting to install your OPTIFY Performance Sensor.
Getting Started
Necessary equipment: Items included in the OPTIFY
Performance Sensor kit:
• OPTIFY Performance Sensor
• Installation tool
• Rubber cover (optional)
Additional items (required):
• Smartphone
• Computer
Additional items (optional):
• Sensor adapter
• Gloves
• Clean soft cloth
• Torque wrench
• 1-1/4″ (32mm) wrench
• 7/16″ (11mm) socket
• Socket wrench
STEP 1
Install OPTIFY application
STEP 2
Create an OPTIFY account using the desktop or mobile application, then create
or join a plant. dodgeoptify.com
STEP 3 Create an asset
Log in to the OPTIFY application with the account created in step 2.
Select “Assets,” then add a new asset with the “add” button.
Fill in the asset details and select “Create Asset.”
Mount sensor
- Clean surface to be free of dirt and debris.
- Find a grease fitting, oil plug, or any other threaded hole that will accept either the sensor or sensor adapter.
Optional: Bearing
Locate a grease fitting on the 30° face of the bearing and remove plug.
Optional: Gearing
If being mounted to a gear reducer, locate the OPTIFY Performance Sensor
adapter and remove the red push-in plug.
Thread sensor by hand and tighten using the installation tool. If desired, tighten sensor using a torque wrench, applying 7-12 lbs-in (0.8-1.4Nm).
STEP 5Begin activation
Press the silicone button located on the sensor to begin activation. The LED
light will blink three times.
Assign sensor to asset
On the asset page, select your new asset created in step 3. Select “Commission
new sensor.”
Find your new sensor from the list and follow the prompts.
Required information:
• Asset name
• Nominal speed
• Part number
• Asset type
Installation complete
After completing the installation process, the application should function
properly.
If there are any problems, please contact support at sensortechsupport@
dodgeindustrial.com
Specific conditions of use for this application are as follows:
- The maximum temperature of the mounting surface must be no hotter than +120°C. The ambient temperature range of the sensor is -40°C to 105°C. The installer is responsible for ensuring that the sensor is used between these limits. The assessment of the sensor’s functionality and its role in stopping the equipment in the event of equipment failure is not implied by the certification, which is related to its hazardous area compliance only.
- Under extreme circumstances, the non-metallic cap may generate an ignition-capable level of electrostatic charge. Therefore, the sensor shall not be installed in a location where the external conditions are conducive to the build-up of electrostatic charge. In addition, the equipment shall only be cleaned with a damp cloth, and the metallic base of the sensor shall be effectively connected to earthed metal when installed.
To manage your registered assets, visit OPTIFY: dodgeoptify.com
NOTE: This sensor is intended for application in hazardous location, typical marking shown below.
NOTE: These instructions must be read thoroughly before installation or operation. This instruction manual was accurate at the time of printing. Please see dodgeindustrial.com for updated instruction manuals.
CAUTION: The sensor should be installed by technically qualified
personnel. Failure
to install the sensor in compliance with applicable codes and regulation and
according to the manufacturer’s recommendations may result in unsatisfactory
performance or equipment failure, and may void the sensor warranty.
WARNING:
-
Only qualified individuals who are familiar with appropriate national codes, local codes and sound practices should install, repair or modify mounted bearings and/or related accessories. Installation should conform to appropriate codes and practices. Failure to follow these instructions could
result in serious personal injury, death and/or property damage. -
To ensure the drive is not unexpectedly started, turn off and lock-out or tag power source before proceeding. Failure to observe these precautions could result in bodily injury.
-
Because of the possible danger to person(s) or property from accidents which may result from the improper use of products, it is important that correct procedures be followed. Products must be used in accordance with the engineering information specified in the catalog. Proper installation, maintenance and operation procedures must be observed. The instructions in the instruction manuals must be followed. Inspections should be made as necessary to assure safe operation under prevailing conditions. Proper guards and other suitable safety devices or procedures as may be desirable or as may be specified in safety codes should be provided, and are neither provided by Dodge nor are the responsibility of Dodge. This unit and its associated equipment must be installed, adjusted and maintained by qualified personnel who are familiar with the construction and operation of all equipment in the system and the potential hazards involved. When risk to persons or property may be involved, a holding device must be an integral part of the driven equipment beyond the speed reducer output shaft.
-
Batteries inside. Fire or explosion may result if exposed to heat. Do not disassemble, incinerate, or heat above +125°C (+257°F).
CAUTION: Mounted bearing surface temperature hazard. The external surface of a mounted bearing may reach temperatures which can cause discomfort, burns or injury to individuals.
FCC Compliance Statement
CAUTION: Changes or modifications not expressly approved could void your authority to use this equipment. This device complies with Part 15 of the FCC Rules. Operation to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE : Frequency band(s) in which the radio equipment operates: 2402 MHz–2480 MHz. Maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates: 0dBm.
Industry Canada Statement:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Country of Origin: Japan
HS Code (HTS): 9031.80.8085
WEEE EU Directive 2012/19/EU
Products that are marked with the crossed-out wheeled bin symbol as shown
here; shall be handled by applying following information:
The crossed-out wheeled bin symbol on the product(s) and/or accompanying
documents means that used electrical and electronic equipment (WEEE) should
not be mixed with general household waste.
For professional users in the European Union, please contact your dealer or
supplier for more information on how to discard electrical and electronic
equipment (EEE).
Scan for translated versions: info.dodgeindustrial.com/translations
Dodge Industrial, Inc.
1061 Holland Road Simpsonville, SC 29681
+1 864 297 4800
© DODGE INDUSTRIAL, INC. AN RBC BEARINGS COMPANY