serenelife SLGZ48 Foldable 3-Wheel Golf Push Cart User Manual
- June 7, 2024
- serenelife
Table of Contents
SLGZ48
Foldable 3-Wheel Golf Push Cart
New Deluxe Scorecard Holder, Upper & Lower Brackets with Elastic
Strap
Includes Cup Holder, Scorecard Holder, and Patented Bag Holder
WARNING:
- For your own safety, please read and understand these warnings and keep this user guide for future reference.
- Always make sure the trolley is fully extended and locked before use. Always make sure the trolley is folded and locked properly before lifting or transporting.
- Do not run while using this product.
- Do not use accessories other than those designed for use with this trolley.
- Keep all packing materials away from children and recycle where possible or where required by law.
MAINTENANCE
- To clean the trolley, wipe with a soft, dry cloth.
- Car polish may be used to maintain the finish.
- Lubricate moving parts every 6 months.
WARNING:
- Keep hands and fingers away from moving or sliding parts!
- Always keep control of the buggy – Do not let it run downhills without full control.
PARTS LIST
| A PVC handle | N Right wheel locking mechanism |
|---|---|
| B Umbrella holder base | 0 Left wheel locking mechanism |
| C Scorecard holder | P Rear wheel assembly |
| D Handle tube | Q Main lower frame tube |
| E Umbrella holder storage rack | R Slippery connecting rods |
| F Upper bag holder bracket | S Adjustable bag elastic rope |
| G Joint | T Lower bag holder bracket |
| H Connecting rods | U Front wheel assembly |
| I Main upper frame tube | V Adjustable handle mechanism |
| J Leg bracket | W Handle brake for front wheel swivel |
| K 2 holes leg frame | X Bottom bracket bag |
| K1 4 holes leg frame | Y Push-button system |
| L Anti-splay wire | Z Strap |
| M Weight stabilizer | Z1 Hook |
ASSEMBLY STEPS
Pull the handle up until you hear the cart ‘Click’ as in Fig.1
Press the button and insert the rear wheels as in Fig.2
Insert the front wheel as in Fig.3
Completely assembled trolley as Fig.4.
FOLDING STEP
Press the red button and fold the cart in the direction of the arrow as in
Fig.5
Fig.6 shows the folded position
SWIVEL FRONT WHEEL SYSTEM
The front-wheel can 360 swivels when the handle brake pulls down as Fig.7, and the handle brake is pull up, the front wheel will run straight line.
USING THE BASKET
Point 1, First step: Fixed the velcro strap on the connecting rod, upper
the plastic.
Check the two sides’ elastic strap is the same length.
**USE THE BRAKE
**
Push on
the brake pedal to stop the rear wheel and pull off to release as in Fig.8 and
9.
Point 2, Fixed the second velcro strap on the lower connecting rod, and only
fix the velcro, so it can slide down and up when folding,
do not fix it tightly, otherwise, it will affect folding the trolley.
Point 3 & 4, Fixed velcro strap on the 2 holes leg frame, then pull the elastic strap and click into Point 5 & 6 on the 2 holes leg frame.
Point 7 & 8, Click the elastic strap under the scorecard holder and check the elastic strap if the same.
FRONT-WHEEL ADJUSTABLE SYSTEM
WHEN FACING THE CART:
If the cart veers to RIGHT:
Use the Allen wrench (as shown in Fig. 12) to lose the 2 screws (A) on the
backside of the front wheel frame as shown in Fig. 13. Then adjust the front
wheel to the center position by turning the screw (B) counterclockwise as in
Fig. 14.
Tighten the 2 Screws (A) after the front wheel alignment is done.
If the cart veers to LEFT:
Use the Allen wrench (as shown in Fig. 12) to lose the 2 screws (A) on the
backside of the front wheel frame as shown in Fig. 13. Then adjust the front
wheel to the center position by turning the screw (B) clockwise as in Fig. 14.
Tighten the 2 Screws (A) after the front wheel alignment is done.
FEATURES:
- 3-Wheel AI Frame Trolley
- New Deluxe Scorecard Holder
- Includes Foot Brake for Rear Wheel
- With Handle Brake to Control 360° Swivel for Front Wheel
- Upper and Lower Bracket with Elastic Strap
- TPE Handle Grip
- Push Button System
- Ergonomic Padded Adjustable Handle
- Includes Cup Holder, Scorecard Holder, and Patented Bag Holder
- Simple Quick Braking System
- Convenient Storage and Cooler
- EZ Fold Mechanism
- Durable and Compact Size for Easy Storage and Transportation
- Easy to Fold and Unfold
- Designed for Multiple Pushing Positions
- Umbrella Holder Not Included
- * Assembly Needed
WHAT’S IN THE BOX:
- (1) 3-Wheel Golf Push Cart
TECHNICAL SPECS:
- Construction Material: Aluminum Frame
- Max. Load Capacity: 33 lbs.
- Front Wheel Size: 9.5” -inches
- Rear Wheels Size: 11.5” -inches
- Folded Product Dimension (L x W x H): 19.1” x 14.6” x 22.8” -inches
- Unfolded Product Dimension (L x W x H): 44.7” x 28” x 47.8” -inches
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>