ring Panic Button Z-Wave User Guide
- June 6, 2024
- Ring
Table of Contents
Panic Button Z-Wave
Technical Manual
Instructions to locate Z-Wave DSK/QR code
Follow Device inclusion instructions provided in Ring Alarm mobile applications to locate QR codes and enter PIN Code
Factory Reset Instructions
Press and hold the Setup button for 10 seconds. When the LED ring stops
blinking, Panic Button has reset.
A factory reset disconnects the Panic Button from your Ring Alarm. To begin
using the Panic Button again, repeat the setup process in the Ring app.
Use this procedure only in the event that the network primary controller is
missing or otherwise inoperable.”
Association CC:
This sensor has one Association group of 1 node. Group 1 is the lifeline group that will receive unsolicited messages relating to Panic Button notifications, case tampering notifications, and low battery notifications.
Sensor Condition | Command Class & Value | Configurable? |
---|---|---|
Communication Test | Notification Report, Type: System (0x09) Event: (0x05) | |
Wake Up Notification | Yes, via Notification Set of Notification Type 0x09 | |
Sensor Case Removed | Notification Report, |
Type: Home Security (0x07)
Event: Tampering Product Covering Removed (0x03)
Wake Up Notification| Yes, via Notification Set of Notification Type 0x07, and
status of
x00: This type of notification turned off OxFF: This type of notification
turned on
Sensor Case Fastened| Notification Report,
Type: Home Security (0x07)
Event: Previous Events Cleared (0x00)| Yes, via Notification Set of
Notification Type 0x07, and status of
Ox00: This type of notification turned off OxFF: This type of notification
turned on
Battery Level| A level of 0x64 indicates that the battery is new.
A level of 0x63 indicates the battery is normal/ OK but not new.
A level of Ox00 indicates that the battery should be changed “soon!’ A battery
level of OxFF indicates that the battery is dead and the sensor is no longer
operational.| No
Panic| Command Class Notification Event Type: Call Police Ox01| Yes, via
Notification Set of Notification Type OxOA, and status of Ox00: This type of
notification turned off OxFF: This type
To review your warranty coverage, please visit
www.ring.com/warranty.
© 2020 Ring LLC or its affiliates.
Ring, Always Home, and all related logos are trademarks of Ring LLC or its
affiliates.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>