SWIT FL-C200D LED Dual Colour Temperature Spotlight User Manual

: October 30, 2023
: SWIT

Table of Contents

****
FL-C200D LED Dual Colour Temperature Spotlight
TECHNICAL PARAMETERS
APPEARANCE
CONTROL PANEL AND USAGE
SYS Setting

****

FL-C200D LED Dual Colour Temperature Spotlight

Thank you for choosing SWIT products. Please read the instructions before using, and keep it for future reference.

TECHNICAL PARAMETERS

Model	FL-C200D	FL-C400D
Colour temperature	2700K-6500K
Brightness	0%-100%
CRI	97
TLCI	99
SSl(DSS)	75

Central illumination

| Spot:

around 65000 Lux@lm 7200 Lux@2m 2600 Lux@3m

Flood:

around 12000 Lux@lm 1300 Lux@2m 480 Lux@3m

| Spot:

around 130000 Lux@lm 15000 Lux@2m 5200 Lux@3m

Flood:

around 24000 Lux@lm 2600 Lux@2m 960 Lux@3m

Overall Net Weight

| Details Figurel Figure 2 Figure3

Note: FL-C200D and FL-C400D have the same external dimensions, the side dimensional drawing shows FL-C200D as an example

Model| 6.85Kg (Manual focus version with blackout filter) 7.2Kg (with blackout filter, motorised focus version)

CAUTIONS

Do not disassemble the luminaire or touch the interior of the luminaire with metal objects as this may cause damage;
Do not use outdoors in rain or snow or leave the luminaire in a wet environment;
To ensure safety when using the luminaire, please use it with a safety rope;
Use this product only in the temperature range of -l0°C to 40°

APPEARANCE

The FL-C200D and FL-C400D products are identical in appearance except for the silk-screened side labels which are different. Product display with FL-C200D as an example.

Power switch
DIMMER”Knob
USB
“COLOR TEMP”Knob
shaped bracket
DMXIN/OUT
U-bracket adapters
AC IN/OUT
Focusing handle (Adjusting focus)
Button
Pitch angle adjustment knob
“MENU/ENTER”knob
LCD
Insurance loop
Motor

MODIFICATIONS-MOTOR FOCUSING SOLUTIONS

This product is supplied with a motor module as an option, the user can purchase the motor module according to the usage requirements and carry out the modification of the version with motor by themselves in the following way:

Use the tool (Allen key) inside the accessory box to remove the focus handle in figure 8;
Note : The fastening screws for the focusing handle are of the following sizes M4*8
Follow the instructions on the control panel label to find the holes reserved for the motor mounting label and remove the excess;
Plug in the motor module communication cable to establish a valid connection between the motor module and the FL-C200D/FL-C400D lamp body;
Smooth out the motor module communication lines and fit the motor module coupling to the lamp body focusing screw;
Hold the motor module against the flat surface of the FL-C200D/FL-C400D rear housing with your hand (be careful not to press on the motor module communication wires);
Use the matching tool (Allen key) to tighten the motor coupling screws as shown in Figure 9;
Align the motor module with the corresponding motor mounting screw holes on the control panel and use M3*12 screws for fastening, the appearance of the complete machine after modification is shown in Figure 7 and Figure 10;
Motor Reset
After the initial installation of the motor, the motor must be reset:
- Turn on the FL-C200D/FL-C400D power switch;
- The motor is reset by turning and pressing the “MENU/ENTER” knob and pressing the “SYS” -> “Motor Reset path, the motor reset process is shown in Figure 11 to Figure 13
- Once the motor has been successfully reset, press the “MENU/ENTER” knob or the ” ” button to exit this screen.

CONTROL PANEL AND USAGE

The operating modes include: CCT mode, DMX mode, EFF mode, SYS mode, the control panel knobs and keys function as follows:

“MENU/ENTER”Knob: Working mode switching and parameter setting by pressing or rotating;
“»” Button: Back to previous menu
“COLOR TEMP”Knob: Colour temperature parameter adjustment
“DIMMER”Knob: Brightness parameter adjustment
Focusing handle/motor: Focusing

CCT mode

DMX mode

EFF mode

SYS Setting

Under the [SYS] display, users can set system parameters and learn other relevant information such as firmware version number, product specification, hardware number, etc.

No.	Menu list	Parameter List	Function description
l	Firmware Version	Vl.2.6R	Firmware version of this machine
2	Model	FL-C400D	Product Specification
3	Hardware ID	06420000001	Local hardware number
4	Spot-Flood	15′-50°	Motor regulation: 15′ for spot light, 50′ for flood

light
5| Firmware Update| Yes| Firmware upgrade

6

|

Fan ON/OFF

| AUTO| Fan status “Auto

OFF

| The fan status is “OFF”, when:

1) the FL-C200D Dimmer parameter has a control range of 0% to 73%;

The FL-C400D Dimmer parameter has a control range of 0%-48%.

7

|

DMX ON/OFF

| ON| DMX function on
OFF| DMX function off

8

|

Dimming Curve

10

| Motor Reset|

Yes

| Motor reset

Note: This must be done for first time motor installation

Use of motors

There are two types of motor regulation for this product: local control and DMX control.

Local control
Rotate and press the “MENU/ENTER” knob and press the “SYS” “Spot-Flood” path for manual adjustment of the motor parameters, parameter adjustment range: 15°-50°.

DMX control

makes a valid connection between the DMX external control device and the FL-C200D/FL-C400D;
Turn and press the “MENU/ENTER” knob, press “SYS” “DMX ON/OFF” to select the path “ON” to turn on the DMX switch;
Press the” ” button to exit the “SYS” screen;
Rotate and press the “MENU/ENTER” knob to set the DMX address in “DMX” mode, valid range for DMX addresses: 001-512; See Figure 15 and Table 2 for details.
Find the motor control corresponding channel actuator and slide the actuator to control the motor.

FIRMWARE UPGRADES

Program upgrade package access
Access: http://www.swit.cc
Firmware upgrade steps
- Prepare an empty USB stick with a FAT32 file system;
- Place the firmware upgrade package in the root directory of the USB stick;
- Turn on the power switch so that the FL-C200D/400D is in working condition, insert the USB flash drive into Figure 4@ USB port;
- Rotate, press the “MENU/ENTER” knob and press “SYS” ➔ “Firmware Update” ➔”Yes” to upgrade the firmware:
- Wait for a successful prompt and reboot the FL-C200D/400D to check the firmware version and confirm that the upgrade was successful:
- Rotate, press the “MENU/ENTER” knob, press “SYS” ➔ “Firmware Version” path to check the firmware version of the machine, if the version number is the same as the upgrade package version number, then the firmware upgrade is successful;
- If the firmware upgrade fails, see [General Handling of Upgrade Failures] for details
General handling of failed upgrades
If the firmware upgrade prompt fails, try the following two methods:
- Press the “MENU/ENTER” key to exit the current interface and repeat [firmware upgrade steps] step 4) until the upgrade is successful;
- Replace the USB flash drive with one that meets the requirements and repeat steps 2} to 5) of the [Firmware Upgrade Procedure] until the upgrade is successful;