SWIT BL-200/BL-300 Bowens COB LED Light User Manual
- October 27, 2023
- SWIT
Table of Contents
BL-200/BL-300 Bowens COB LED Light Ver:A
USER MANUAL
SWIT Electronics Co.,Ltd.
Thank you for choosing SWIT products. Please read the instructions before using, and keep it for future reference.
Specification
Model | BL-200 | BL-300 |
---|---|---|
Color temperature | 5600K | |
Brightness | 000%-100% | |
CRI | 97 | |
TLCI | 98 | |
Beam angle | 61°( Without Shield ) | |
Maximum illuminance | 5900 Lux@lm (Without Shield) 38000 Lux@lm (With Standard | |
Shield) | 12100 Lux@lm (Without Shield) 54000 Lux@lm (With Standard Shield) | |
Ways of control | Knob, Button, APP, DMX | |
Working voltage | AC 100-240V,50/60Hz; DC 12-17V | |
Input power | 200W | 300W |
Dimension(mm) | Shown as Below | |
Net weight | Controller: 1.9Kg; Light Body:1.8Kg | Controller: 2.0Kg; Light |
Body:2.6Kg
Warning
- Do not pull out the power cable when the light is power on. Cut off the power when not using, switch off the light before pull out or plug in;
- Do not disassemble the light or touch the internal of the light with metal object to avoid damage;
- Do not use the light in raining or snowing days or store in wet environment.
Appearance
1.Power switch
2. LCD screen
3.”MENU”
4. Cold shoe
5. Battery plate
6. DMX IN
7. DMX OUT
8. AC INPUT
9. DC OUTPUT| 10 “ENTER”
11. “LANGUAGE”
12. Adjusting knob
13. DC INPUT
14. Handle
15. U-shape bracket
16. Bracket adaptor
17. Fastening Knob
18. LED
19. Light shield fixed cover
---|---
Control Interface & Menu
- MENU INTERFACE Switch on the light(Fig.5 C)),screen will show the interface before last time switch off, press”ENTER”button (Fig.5 ())to return to menu interface(Fig.8).
- CCT MODE PressuMENUnbutton(Fig.5 ®)to return to menu interface(See Fig.8),press “ENTER”button(Fig.S C))to enter into CCT mode(See Fig.9), press “ENTER” button(Fig.5 (Aagain to choose intensity,rotate the adjusting knob(Fig.5 ©)to adjust the intensity of the light in according to use requirement.
No.| Parameter| Adjusting Range
---|---|---
1| Intensity| 000%-100% - SCENE MODE Press”MENU”button(Fig.S ®)to return back to menu interface(See Fig.8), rotate the adjusting knob(Fig.5 to “SCENE”, press”ENTER”button (Fig.5 (C)to enter into scene mode(See Fig.10):
► Rotate the adjusting knob(Fig.5 @):change the parameter or change the value;
► “ENTER”button(Fig.5 (A:choose the parameter or back to previous step.
No. | Parameter | Adjusting Range |
---|---|---|
1 | SCENE | OFF,01-09 |
2 | SPEED | 00-10 |
3 | Intensity | 000-100 |
-
DMX & FAN SETTING Press”MENU”button(Fig.5 (Ato return back to menu interface(See Fig.8),rotate the adjusting knob(Fig.5 to “DMX & FAN Setting”, press”ENTER “button(Fig.S CAto enter into DMX & FAN setting mode(See Fig.11):
► Rotate the adjusting knob(Fig.5 ®):change the parameter or change the value; -
► “ENTER”button(Fig.5 ®):choose the parameter or back to previous step.
No.| Parameter| Adjusting knob
---|---|---
1| DMX| 000-512
2| FAN| ON/OFF
|
---|---
5. Bluetooth Resetting & ID
Press”MENU”button(Fig.5 @)to return back to menu interface(See Fig.8),rotate
the adjusting knob (Fig,5 @)to” Bluetooth reset & ID”, press” ENTER”
button(Fig.5 @)to enter into Bluetooth reset & ID interface(See Fig.12),rotate
the adjusting knob(Fig.5 @)to set”?”to” Yes” then finished the reset.
6.
Language
Press”LANGUAGE”button(Fig.5 @®)to change the language between Chinese and
English.
7. Parameter Adjusting Speed
This product is equipped with fast and slow adjustment modes for parameters.
Press the adjustment knob (Figure 5) to complete the switch.
The upper right corner of the screen shows:
“F” represent fast adjusting mode;
» “S”represent slow adjusting mode.
DMX Mode
Press” MENU”button(Fig.3 @)to change the working mode to DMX mode, connect all
the light through DMX cable and connect with DMX signal output device, set the
DMX address(See 4 DMX & FAN SETTING).
This product occupy one DMX channel to adjust the intensity, intensity
adjusting range: 000%-100%.
APP Usage
- APP Name and download
- APP Name: SWIT BL(Android)/ DeSal Lite+(IOS)
- Download:
» Android: Scan QR to Install(Fig.14);
» IOS: Apple Store search”DeSal Litet”to Install.
- APP Using Attention
» Please reset the Bluetooth of light if APP can not recognize the light;APP can only control to turn off the brightness of the light, and the power switch of the lamp is controlled in the body.
https://www.swit.cc/uploads/APK/SWIT_BL.apk
Packing List
No | Accessories | Quantity |
---|---|---|
1 | BL-200 or BL-300 light body | x 1 |
2 | Controller | x 1 |
3 | AC power cable | x 1 |
4 | DC power cable | x 1 |
5 | Control box bracket | x 1 |
6 | Standard shield | x 1 |
7 | Certification | x 1 |
8 | BA-OCT36(36-inch Octagonal Softbox) | Opitonal Accessories |
9 | BA-LAN26(26-inch Lantern Softbox) | |
10 | BA-PARA26(26-inch Parabolic Dome Softbox) | |
11 | BA-6016(16-inch Beauty Dish) | |
12 | BA-ST3(3.1-inch Snoot With honeycomb) | |
13 | BA-F3X(Fresnel 12°-40°3x Lens) |
Tel:+86-25-85805753
Fax:+86-25-85805296
http://www.swit.cc
E-mail: contact@swit.ce
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>