SWIT BL-200 Bowens COB LED Light User Manual
- June 3, 2024
- SWIT
Table of Contents
SWIT BL-200 Bowens COB LED Light
ABOUT COMPANY
- Tel : +86-25-85805753
- Fax: +86-25-85805296
- http://www.swit.cc
- E-mail: contact@swit.cc
Thank you for choosing SWIT products. Please read the instructions before using, and keep it for future reference.
Specification
Model | BL-200 | BL-300 |
---|---|---|
Color temperature | 5600K | |
Brightness | 000%-100% | |
CRI | ||
TLCI | 98 | |
Beam angle | 61°( Without Shield ) | |
Maximum illuminance | 5900 Lux@lm (Without Shield) |
38000 Lux@lm (With Standard Shield)
| 12100 Lux@lm (Without Shield) 54000 Lux@lm (With Standard Shield)
Ways of control| Knob, Button,APP, DMX
Working voltage| AC 100-240V,50/60Hz; DC 12-17V
Input power| 200W| 300W
Dimension(mm)| Shown as Below
Net weight| Controller: 1.9Kg; Light Body:1.8Kg| Controller: 2.0Kg;
Light Body:2.6Kg
DIMENSION
Warning
- Do not pull out the power cable when the light is power on. Cut off the power when not using, switch off the light before pull out or plug in;
- Do not disassemble the light or touch the internal of the light with metal object to avoid damage;
- Do not use the light in raining or snowing days or store in wet environment.
Appearance
- Power switch
- LCD screen
- “MENU”
- Cold shoe
- DMX IN
- “ENTER”
- DMX OUT
- AC INPUT
- Battery plate
- DC OUTPUT
- “LANGUAGE”
- Adjusting knob
- U-shape bracket
- Light shield fixed cover
- DC INPUT
- Handle
- Bracket adaptor
- Fastening Knob
- LED
Control Interface & Menu
MENU INTERFACE
Switch on the light(Fig.5 CD),screen will show the interface before last time
switch off, press”ENTER”button (Fig.S@))to return to menu interface(Fig.8).
.CCT MODE
Press”MENU”button(Fig.5 ®)to return to menu interface(See Fig.8),press
“ENTER”button(Fig.S@))to enter into CCT mode(See Fig.9), press “ENTER”
button(Fig.5 @))again to choose intensity,rotate the adjusting knob(Fig.S@)to
adjust the intensity of the light in according to use requirement.
No. | Parameter | Adjusting Range |
---|---|---|
1 | Int ensit y | 000%-100% |
SCENE MODE
Press”MENU”button(Fig.5 ®)to return back to menu interface(See Fig.8), rotate
the adjusting knob(Fig.S@) to “SCENE”, press”ENTER”button (Fig.5 @))to enter
into scene mode(See Fig.IO):
- Rotate the adjusting knob(Fig.5 @):change the parameter or change the value;
- “ENTER”button(Fig.S@)):choose the parameter or back to previous step.
DMX & FAN SETTING
Press”MENU”button(Fig.5 ®)to return back to menu interface(See Fig.8),rotate
the adjusting knob(Fig.5@) to “DMX & FAN Setting “, press”ENTER “button(Fig.5
@))to enter into DMX & FAN setting mode(See Fig.11):
- Rotate the adjusting knob(Fig.5@):change the parameter or change the value;
- “ENTER”button(Fig.S@)):choose the parameter or back to previous step.
No.| Parameter| Adjusting knob
---|---|---
1| DMX| 000-512
2| FAN| ON/ OFF
Bluetooth Resetting & ID
Press”MENU”button(Fig.5 @)to return back to menu interface(See Fig.8),rotate
the adjusting knob (Fig.5 @)to”Bluetooth reset & ID”, press”
ENTER”button(Fig.5 @))to enter into Bluetooth reset & ID interface(See
Fig.12),rotate the adjusting knob(Fig.S@)to set”?”to”Yes”,then finished the
reset.
Language
Press”LANGUAGE”button(Fig.5 ®)to change the language between Chinese and
English.
Parameter Adjusting Speed
This product is equipped with fast and slow adjustment modes for parameters.
Press the adjustment knob (Figure 5) to complete the switch. The upper right
corner of the screen shows:
- “F” represent fast adjusting mode;
- “S”represent slow adjusting mode.
DMX Mode
Press”MENU”button(Fig.3 ®)to change the working mode to DMX mode, connect all
the light through DMX cable and connect with DMX signal output device, set the
DMX address(See 4 DMX & FAN SETTING).
This product occupy one DMX channel to adjust the intensity, intensity
adjusting range: 000%-100%.
APP Usage
- APP Name and download
- APP Name: SWIT BL(Android)/ DeSal Lite+(IOS)
- Download:
* Android: Scan QR to lnstall(Fig.14);
* IOS: Apple Store search”DeSal Lite+”to Install.
- APP Using Attention
- Please reset the Bluetooth of light if APP can not recognize the light;
- APP can only control to turn off the brightness of the light, and the power switch of the lamp is controlled in the body.
Packing List
No | Accessories | Quantity |
---|---|---|
1 | BL-200 or BL-300 li ght body | x l |
2 | Co ntrol ler | x l |
3 | AC power cable | x l |
4 | DC power cable | x l |
5 | Cont rol box bracket | x l |
6 | St an dard shield | x l |
7 | Certi ficati on | x l |
8 | BA-OCT36 {36-in ch Octa gonal So ft box) | **** |
Opi tonal Acc essories
9| BA-LAN26(26 -inch La nte rn So ftb ox)
10| BA-PARA 26(26-inch Parabo li c Dome So ft box)
11| BA-BD1 6(16- inch Beauty Dish)
12| BA-ST3(3.l -inch Snoot Wi th honeycomb)
13| BA-F3X( Fresne l 12°-40°3x Lens)
14| BA-BK4(Bowe ns 4-leaf Barndoor for st an da rd reflector)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>