BRIZO 8CH-600S Steam Bath Digital Interface Instructions

BRIZO 8CH-600S Steam Bath Digital Interface

Product Information

Specifications :

• Model Number: 113040
• Serial Number: [Serial Number]
• Date of Purchase: [Date of Purchase]
• Product Name: 8CH-600S, 8CB-600S & 8CN-600S Steam Bath Digital Interface

Product Usage Instructions

• Cleaning and Care
  The interface MUST be installed inside the steam room for proper operation of the system. To clean the interface, use a damp cloth and mild soap. Do NOT use abrasive cleaners which might scratch the interface.

• Pre-Installation – Interface Location

• The 8CH-600S, 8CB-600S, and 8CN-600S Series Digital Interfaces must be installed inside the steam room and away from the steam head. It is recommended to install the interface on the opposite wall from the steam head, with a height of four feet from the floor. A 2 3/4 inch hole should be provided in the wall at this location.
  Note: The interface should not be located above the steam head or in the direct line of shower spray.

FAQ:

1. Q: What models of steam generators are compatible with the 8CN-600S, 8CH-600S, and 8CB-600S interfaces?
   A: The 8CN-600S, 8CH-600S, and 8CB-600S interfaces will only function with 8GE-TSG steam generator models.

• Model Number:____
• Serial Number: ____
• Date of Purchase: ____

8CH-600S, 8CB-600S & 8CN-600S STEAM BATH DIGITAL INTERFACE INSTRUCTIONS To reference replacement parts and access additional technical documents and product info, visit www.brizo.com

Read all instructions prior to installation.

• CAUTION
  Failure to read these instructions prior to installation may result in personal injury, property damage, or product failure. Manufacturer assumes no responsibility for product failure due to improper installation.

• WARNING
  Elderly persons, pregnant women, or those suffering from heart disease, high blood pressure, diabetes or who are not otherwise in good health, do not use this device unless directed to do so by a physician. Also, do not use steam bath while under the influence of alcohol or drugs.

  • 1-800-355-6478
  • www.brizo.com/customer-support/contact-us

• Register Online
  www.brizo.com/customer-support/product-registration

You May Need

Limited Warranty on Brizo® Steam Bath and Steam Products

• Applicable to products purchased and installed in the USA and Canada Residential Steam Bath Generators: Brizo Kitchen and Bath Company (“Brizo”) warrants to the original consumer purchaser that the parts (except for electronic parts) of its residential steam bath generator purchased from authorized Brizo sellers will be free from defects in materials and workmanship for as long as the original consumer purchaser owns the home in which the steam bath was originally installed. This lifetime limited warranty does not apply to residential steam bath generators that are used in commercial applications (as defined herein).
• Residential Electronic Parts, Controls, Spa Options and Accessories: Brizo warrants to the original consumer purchaser that the electronic parts of its steam bath generator and its controls, spa options and accessories purchased from authorized Brizo sellers will be free from defects in materials and workman-ship for a period of two (2) years from the date that the product is received by the original consumer purchaser or their authorized representative (installation contractor, etc.). This two-year limited warranty does not apply to controls, spa options, electronic parts and accessories that are used in commercial applications (as defined herein).
• Commercial Warranty : For the purposes of this warranty the term “commercial application” refers to installation in any setting in which the product is not being used for personal household use, including, but not limited to, hospitality applications, day spas and short-term and long-term rentals.
• Brizo warrants that the parts (including electronic parts) of its steam bath generators (including steam bath generators with model numbers beginning with 8GE that are 7.5kW 15kW), equipment, controls, electronic parts, spa options and accessories purchased from authorized Brizo sellers and used in a commercial application will be free from defects in materials and workmanship for a period of one (1) year from the date that the product is received by the original purchaser or their authorized representative (installation contractor, etc.).
• What We Will Do: Brizo will, at its option, repair or replace, free of charge, any part that proves defective in material and/or workmanship under normal instal-lation, use and service during the applicable warranty period as stated above. Brizo may elect to refund the purchase price. Replacement parts are subject to availability and may differ from those originally supplied.
• For residential applications, two (2) years following the date that the product was received by the original consumer purchaser or their authorized representative (installation contractor, etc.) and with prior approval by Brizo, Brizo will pay for labor for repair/replacement associated with warranty coverage. Thereafter, Brizo will not pay for labor associated with removal/repair/replacement of products covered by this warranty.
• For commercial applications, Brizo will, with prior approval by Brizo, pay for labor associated with warranty coverage for ninety (90) days from the date that the product is received by the original purchaser or their authorized representative (installation contractor, etc.). Thereafter, Brizo will not pay for labor associated with removal/repair/replacement of products covered by this warranty. These are the consumer’s exclusive remedies.
• What Is Not Covered: Because Brizo is unable to control the quality of Brizo products sold by unauthorized sellers, unless otherwise prohibited by law, this warranty does not cover
• Brizo products purchased from unauthorized sellers.
• This warranty does not cover damage caused by improper or negligent installation or use. Provided that Brizo is paying the cost of the labor under the terms above, this warranty does not cover repairs attempted by any person other than an authorized Brizo agent and shall be limited to the repair or replacement of defective parts by Brizo or its authorized agent.

This warranty is void if any of the following should occur:

• The use of the product for an unintended application, including a commercial application for all products except those products for which a commercial application is appropriate.
• Failure to follow instructions, including care, cleaning and usage instructions, provided in the product’s owner’s manual.
• The product’s serial number has been altered or removed.
• The product is modified in any manner which Brizo concludes, after its inspection, affects the reliability of the product.
• The product has been improperly repaired by anyone not specifically designated or authorized by Brizo.
• The product is damaged because it is not operated or installed in accordance with supplied instructions.
• The product is installed outdoors.
• The product is installed in a moist and/or humid area with unconditioned air or temperatures that exceed 104 degrees Fahrenheit.
• The product is damaged due to freezing.
• The product is damaged by acts of God.

How to Make a Warranty Claim:

• To obtain warranty repair or replacement, contact Brizo at: 800-355-6478 or [email protected] to receive an RGA# (Return Goods Authorization number) which must be on the carton that is returned via UPS Ground or equivalent. Proof of purchase (original sales receipt showing purchase date) identifying the model and serial number and documentation of the date of receipt of the product by the original purchaser or their authorized representative (installation contractor, etc.) must accompany all warranty claims.
• Limitation on Duration of Implied Warranties: Please note that some states/provinces (including Quebec) do not allow limitations on how long an implied warranty lasts, so the below limitations may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTY, INCLUDING THE IMPLIED
• WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE STATUTORY PERIOD OR THE DURATION OF THIS

WARRANTY, WHICHEVER IS SHORTER.

• Limitation of Special, Incidental or Consequential Damages: Please note that some states/provinces (including Quebec) do not allow the exclusion or limitation of special, incidental or consequential damages, so the below limitations and exclusions may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS
• WARRANTY DOES NOT COVER, AND BRIZO SHALL NOT BE LIABLE FOR, ANY SPECIAL, INCIDENTAL OR CONSEQUEN-TIAL DAMAGES WHETHER ARISING OUT OF
• BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE.
• Additional Rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state/province to state/province. This is Brizo’s exclusive written warranty and the warranty is not transferable.

This device complies with part 15 of the FCC Rules.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s) and operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an output on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Pursuant to FCC 15.21 of the FCC rules, changes not expressly approved by Delta Faucet Co. might cause harmful interference and void the FCC authorization to operate this product.
Cleaning and Care

• Interface MUST be installed inside the steam room for proper operation of the system. Use a damp cloth and mild soap to clean the interface. Do NOT use abrasive cleaners which might scratch the interface.
• The 8CN-600S, 8CH-600S and 8CB-600S interfaces will only function with 8GE-TSG steam generator models.

Pre-Installation – Interface Location

The 8CH-600S, 8CB-600S and 8CN-600S Series Digital Interfaces must be installed inside the steam room and away from the steam head (opposite wall preferred). For convenience the recommended height from the floor is four feet. Provide a 2 3/4” hole in the wall at this location (see Figure 1 ). Important: The steam generator required to complete installation ships with a 35’ cable. When connecting an 8CH-600S, 8CB-600S or 8CN-600S Series Digital Interface, the 8GA-000 power booster will be required for any installation where the cable or combination of cables exceed 35 feet (to a maximum of 70 feet). The power booster and alternative length cables are available for purchase separately.

Electrical Rough-in
Locate the multi-conductor cable (supplied with steam generator). Carefully route this interface cable from the steam generator to the 8CN-600S, 8CH-600S or 8CB-600S Series Digital Interface located inside the steam room (see Figure 1). Route this interface cable through a 3/4” conduit to protect the cable from damage and to facilitate replacement if necessary.

Interface and Cable Installation

1. Locate the previously installed interface cable and black plastic strain relief clamp. Locate the knockout on the steam generator for the interface cable (see Figure 2).

2. Place strain relief clamp around cable approximately seven inches from the end and insert into the hole.

3. Remove the protective cap from the multi-conductor cable plug. Connect the cable to the modular jack.

4. Close and secure the steam generator cover.

5. Locate the modular jack at the female coupler, on the back of the 8CH-600S, 8CB-600S or 8CN-600S Series Digital Interface. Remove protective cap from cable and plug into jack. Confirm that the orientation of the plug properly aligns with the jack. A snap will indicate the plug is installed correctly (see Figure 3).
   WARNING
   Test the interface for operation before continuing on to the next step.

6. Peel adhesive liner from the back of the interface. Apply silicone (supplied) around the back edge of the interface to form a watertight seal (see Figure 3).

7. Apply the interface to the wall. Press firmly and hold for a few seconds. Wipe any excess silicone from around the interface.

• IMPORTANT: The 8CN-600S, 8CH-600S and 8CB-600S interfaces have built in temperature sensors and therefore MUST be installed inside the steam room.
• IMPORTANT: The adhesive on the back of the 8CH-600S, 8CB-600S & 8CN-600S Series Digital Interfaces will NOT seal this interface. It is the responsibility of the installer to seal this interface to the wall with the supplied silicone. Water damage to the interface based on improper installation is not covered by the warranty.
• IMPORTANT: 8CH-600S, 8CB-600S & 8CN-600S Series Digital Interface cables MUST plug directly into the steam generator. Do NOT plug this interface into any of the optional spa options. Steam temperature settings: 60ºF minimum to 125ºF maximum Maximum Time setting: 60 Minutes

Figure 4 – Installation Directions

Interface Operation

The 8CH-600S, 8CB-600S & 8CN-600S Series Digital Interfaces have built-in temperature sensors and there-fore MUST be installed inside the steam room. This interface is compatible with 8GE-TSG steam generators and optional Audiotherapy, Chromatherapy and Aromatherapy spa options (sold separately ).

Power on the Digital Interface

• Congratulations on the purchase of the 8CH-600S, 8CB-600S or 8CN-600S Series Digital Interface.
• After powering on the interface you will experience a blank screen for approximately 60 seconds.

Before You Install

• This interface is pre-configured to be installed in landscape orientation. If you prefer to install in portrait mode, please see the following steps in this section. Otherwise, these steps can be disregarded.
• To rotate the screen press the SETTING “gear” icon in the top left corner on main screen.
• In the MAIN SETTINGS, go to DISPLAY.
• Then ORIENTATION.
• Select the desired orientation for your Interface. The system will then restart.

Connect to WiFi

• If it is the first time powering on the digital interface, you will get the Terms of Use, then Privacy policy and you will need to press the I AGREE button in order to proceed.
• Then you will be able to select and sign in to your desired Wi-Fi network.
• After the desired network has been selected, you will be prompted to enter a password.

Audiotherapy and Chromatherapy Settings

• If Audiotherapy and Chromatherapy are installed, you will see the AUDIO + CHROMA Icon. This is where you would play music and/or activate light therapy without starting a Steam Preset.
• Audio inputs can be adjusted as well output levels by tapping the AUDIO button within the AUDIO + CHROMA menu.
• Chromatherapy intensity and color can be adjusted by tapping the CHROMA button within the AUDIO + CHROMA menu.
• In the audio screen you may select the source of your music by pressing A, B, or Bluetooth.
• Skip Forward, Pause/ Play and Skip Back work when the system is paired with Bluetooth, but do not support audio use with the A or B inputs.
• Volume, Balance, Bass, and Treble are all adjusted with the plus and minus icons by selecting the feature.
•  Press the Return icon when you are done with the music settings.
• If Chromatherapy is installed you should see the CHROMA or AUDIO + CHROMA icon on the home screen. This allows you to access the Chroma-therapy menu screen.
• Press the Chroma icon.
• Select desired Chromatherapy color choice and use the plus and minus icons to adjust the intensity.
• Press the Return icon to the previous screen.

Main Settings

The SETTINGS screen gives you access to make several different configuration changes to customize your overall experience.

Clock Settings

• Press the CLOCK icon to adjust the clock settings.
• The time format may also be changed.

About Information

• Press the ABOUT icon to see any devices connected to the system.
• This screen is for troubleshooting purposes only. Listed are all the possible connected devices and the version numbers will show if they are communicating with the 8CN-600S, 8CH-600S or 8CB-600S interface.
• Press the Return icon to return to the Settings screen.

Temperature Limit Settings
You may increase or decrease the maximum temperature from the TEMPERATURE LIMIT settings screen.

Bluetooth Settings

• If you have Audiotherapy installed, you will need to turn the BLUETOOTH feature on to stream audio from your mobile device.
• Also take note of the BRIZO AUDIO Bluetooth name that will be shown on your digital interface.
• You will look for that name on your mobile device when pairing.

Language Settings
Adjust your prefered language setting here.

Wi-Fi Settings

• From the settings screen, press the Wi-Fi icon.
• Check the Advanced Settings box to get access to more granular settings to your Wi-Fi network.
• Press the Wi-Fi Settings icon to connect the inter-face to Wi-Fi.

RapidMistTM Settings
RapidMist may be turned on or off by pressing the RAPIDMIST icon within the SETTINGS menu. RapidMist preheats the water inside the steam generator for quicker availability.

Advanced Settings

• If you have downloaded the DFC@Home smart phone app, you can pair your mobile phone with the interface.
• If you would like to reset your interface to factory default settings, you may do so via the system reset feature.
• Note: All saved settings will be deleted via this action.

Firmware Update Settings

• When an UPDATE exclamation symbol is displayed, it indicates that a new firmware update is available.
• Press the UPDATE icon and the new software will install on your digital interface.
• The display screen will show “FIRMWARE UP-DATE”. Do not press any icons while update is in process.
• The interface MUST be connected to Wi-Fi to update Firmware.

Starting a Preset

• Select the STEAM icon at the bottom of the screen.
• Upon selection, the profile menu will open allowing you to access the user presets within each profile
• There are four ways to make adjustments within your user presets: STEAM TEMP, AROMA, TIME LEFT, and DURATION.
• The Aroma option will only appear if Aromatherapy is installed with your system.
• The STEAM TEMP Setting allows you to make adjustments to the temperature for the Preset. Note: This is different from the max temperature settings referenced above.
• If you have the Aromatherapy spa option installed with your system, you will have the option to make adjustments to this feature within your steam presets.
• Aromatherapy intensity can be increased or decreased via the plus and minus icons at the bottom of the screen, and users have the option to select either of the two Aromatherapy scent options if installed with the system.
• TIME LEFT gives you the ability to add more time to the active preset. You can increase this to a maximum of 60 minutes.
• DURATION gives you the ability to adjust the time configured in the preset.
• TIME LEFT allows you to increase or decrease the time of the active steam session only.

The Post Preset Experience

• At the end of your Steam Session, your steam will stop, but your Audiotherapy and Chromatherapy will continue if you have these options installed with your system.
• When you press END you will be prompted to save any adjustments that you made to your preset.

Mobile App Settings

• Download the DFC@Home mobile app from the Apple® App Store (iOS users) or Google® Play Store (Android users) for additional functionality and to finalize setup.
• The DFC@Home mobile app allows for additional profile and preset customization and remote ac-cess of your steam shower.
• The 8CH-600S, 8CB-600S or 8CN-600S interface must remain connected to Wi-Fi to ensure access to the DFC@Home mobile app.
  • Get the mobile app.

Voice Assistant Settings
Your Digital Interface is compatible with Amazon Alexa and Google Home Voice assistants. In order to use one of these:

• You will need to have an account setup with either service.
• The Amazon Alexa or Google Home mobile app must be installed on your phone.
• You must have an Amazon Alexa or Google home compatible Speaker.
• The DFC@Home mobile app will provide instructions and will guide you through the setup process.

RP103317p BILATERAL STEAM HEAD INSTALLATION

• To reference replacement parts and access additional technical documents and product info, visit www.brizo.com
• 1-800-355-6478

Read all instructions prior to installation.

• CAUTION
  Failure to read these instructions prior to installation may result in personal injury, property damage, or product failure. Manufacturer assumes no responsibility for product failure due to improper installation.

You may need

• IMPORTANT: To use the bilateral steam head, make sure the steam room wall studs are exposed to allow for proper installation. If the walls are fully finished and studs are not accessible, please use a different type steam head.

• NOTE: For maximum comfort the bilateral steam head should always be located as far from the seating area as possible. The bilateral steam head location should be 12” to 18” above the shower floor or 6” above the rim of the bathtub, as far from the seating area as possible. Do NOT install the steam head directly below the user control. For optimum performance, install the steam head on the wall opposite or adjacent and as far as possible from the user control.

• Rough in the steam line using a minimum of a ¾” copper or brasspipe. Do NOT use black iron or galvanized pipe as it will rust and discolor the wall of the steam room. Do NOT use CPVC or any plastic type pipe, fitting or water type line as the steam pipe.

• Place the bilateral steam head between wall studs (See Figure 2). Make sure that the front lip is placed in such way that it will be flush with the final wall material such as tile or stone (See Figure 4). If you are uncertain of the tile/stone thickness at the time of install, the front lip of the steam head may be slightly recessed back into the wall but must NOT be placed behind backer board and cannot protrude past front of tile (See Figure 3).

• Make sure the bilateral steam head is level, left to right and front to back (See Figure 2).

• Secure the bilateral steam head to wall studs using 8 screws or nails.

• Connect the ¾” copper or brass pipe to the bilateral steam head.

• Remove the front face cover by sliding it out of the bilateral steam head.

• Proceed with steam room construction by insulating the walls and installing backer board onto the wall. Make sure to leave a proper size cutout in the backer board for the bilateral steam head. Do NOT leave a large gap between the backer board and the bilateral steam head.

• Apply supplied sealant between the backer board and the outer edge of the bilateral steam head (See Figure 3).

• Complete the wall construction with thin set and tile/stone. Make sure to leave a proper size cutout in the tile/stone for the bilateral steam head.

• Do NOT leave a large gap between the tile/stone and the bilateral steam head.

• Apply supplied sealant between the tile/stone and the outer edge of the bilateral steam head (See Figure 3).

• NOTE: Make sure there are absolutely no air gaps between the outer edges of the bilateral steam head and the final wall material. If air gaps are left, steam will leak between wall construction and cause water damage to foundation.

• Insert front face cover back into the bilateral steam head. Push it in until it makes contact with the wall.

• Apply dabs of supplied sealant between the left and right edges of the front face cover and the wall tile/stone to make sure the cover does not slide out (See Figure 4).

• NOTE: A single bead of sealant can fill gaps up to 1/4”. If the gap is slightly larger than this, fill it in two steps. First place a bead of sealant deeper into the gap, but not flush with surface. Wait until the sealant is completely cured before coming back to run a second bead on top of the first bead
  (See Figure 3).

  • Cure time of the supplied sealant: 1/4” gap = 5 days, 1/2” gap = 10 days.

Limited Warranty on Brizo® Steam Bath and Steam Shower Products

Applicable to products purchased and installed in the USA and Canada

• Residential Steam Bath Generators: Brizo Kitchen and Bath Company (“Brizo”) warrants to the original consumer purchaser that the parts (except for electronic parts) of its residential steam bath generator purchased from authorized Brizo sellers will be free from defects in materials and workmanship for as long as the original consumer purchaser owns the home in which the steam bath was originally installed. This lifetime limited warranty does not apply to residen-tial steam bath generators that are used in commercial applications (as defined herein).
• Residential Electronic Parts, Controls, Spa Options and Accessories : Brizo warrants to the original consumer purchaser that the electronic parts of its steam bath generator and its controls, spa options and accessories purchased from authorized Brizo sellers will be free from defects in materials and workmanship for a period of two (2) years from the date that  the product is received by the original consumer purchaser or their authorized representative (installation contractor, etc.). This two-year limited warranty does not apply to controls, spa options, electronic parts and accessories that are used in commercial applications (as defined herein).
• Commercial Warranty: For the purposes of this warranty the term “commercial application” refers to installation in any setting in which the product is not being used for personal household use, including, but not limited to, hospitality applications, day spas and short-term and long-term rentals. Brizo warrants that the parts (including electronic parts) of its steam bath generators (including steam bath generators with model numbers beginning with 8GE that are 7.5kW 15kW), equipment, controls, electronic parts, spa options and accessories purchased from authorized Brizo sellers and used in a commercial application will be free from defects in materials and workmanship for a period of one (1) year from the date that the product is received by the original purchaser or their authorized representative (installation contractor, etc.).
• What We Will D o: Brizo will, at its option, repair or replace, free of charge, any part that proves defective in material and/or workmanship under normal installation, use and service during the applicable warranty period as stated above. Brizo may elect to refund the purchase price. Replacement parts are subject to availability and may differ from those originally supplied.
• For residential applications, two (2) years following the date that the product was received by the original consumer purchaser or their authorized representative (installation contractor, etc.) and with prior approval by Brizo, Brizo will pay for labor for repair/replacement associated with warranty coverage. Thereafter, Brizo will not pay for labor associated with removal/repair/replacement of products covered by this warranty.
• For commercial applications, Brizo will, with prior approval by Brizo, pay for labor associated with warranty coverage for ninety (90) days from the date that the product is received by the original purchaser or their authorized representative (installation contractor, etc.). Thereafter, Brizo will not pay for labor associated with removal/repair/replacement of  products covered by this warranty. These are the consumer’s exclusive remedies.
• What Is Not Covered : Because Brizo is unable to control the quality of Brizo products sold by unauthorized sellers, unless otherwise prohibited by law, this warranty does not cover
• Brizo products purchased from unauthorized sellers. This warranty does not cover damage caused by improper or negligent installation or use. Provided that Brizo is paying the cost of the labor under the terms above, this warranty does not cover repairs attempted by any person other than  an authorized Brizo agent and shall be limited to the repair or replacement of defective parts by Brizo or its authorized agent. This warranty is void if any of the following should occur:
  • The use of the product for an unintended application, including a commercial application for all products except those products for which a commercial application is appropriate.
  • Failure to follow instructions, including care, cleaning and usage instructions, provided in the product’s owner’s manual.
  • The product’s serial number has been altered or removed.
  • The product is modified in any manner which Brizo concludes, after its inspection, affects the reliability of the product.
  • The product has been improperly repaired by anyone not specifically designated or authorized by Brizo.
  • The product is damaged because it is not operated or installed in accordance with supplied instructions.
  • The product is installed outdoors.
  • The product is installed in a moist and/or humid area with unconditioned air or temperatures that exceed 104 degrees Fahrenheit.
  • The product is damaged due to freezing.
  • The product is damaged by acts of God.
• How to Make a Warranty Claim : To obtain warranty repair or replacement, contact Brizo at: 800-355-6478 or [email protected] to receive an RGA# (Return Goods
• Authorization number) which must be on the carton that is returned via UPS Ground or equivalent. Proof of purchase (original sales receipt showing purchase date) identifying the  model and serial number and documentation of the date of receipt of the product by the original purchaser or their authorized representative (installation contractor, etc.) must accompany all warranty claims.
• Limitation on Duration of Implied Warranties : Please note that some states/provinces (including Quebec) do not al-low limitations on how long an implied warranty lasts, so the below limitations may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ANY IMPLIED WARRANTY, INCLUDING THE IMPLIED
• WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED TO THE STATUTORY PERIOD OR THE DURATION OF THIS    WARRANTY, WHICHEVER IS SHORTER.
• Limitation of Special, Incidental or Consequential Damages: Please note that some states/provinces (including Quebec) do not allow the exclusion or limitation of special, incidental or consequential damages, so the below limitations and exclusions may not apply to you. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND BRIZO SHALL NOT BE LIABLE FOR, ANY SPECIAL,
• INCIDENTAL OR CONSEQUENTIAL DAMAGES WHETHER ARISING OUT OF BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, TORT, OR OTHERWISE.
• Additional Rights: This warranty gives you specific legal rights, and you may also have other rights which vary from state/province to state/province. This is Brizo’s exclusive written warranty and the warranty is not transferable.

References

• brizo.com
• brizo.com
• Contact Us : Customer Support : Brizo
• brizo.com/customer-support/product-registration

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>