Baseus PPQD-H01 Quick Charge Power Bank User Manual
- October 30, 2023
- Baseus
Table of Contents
PPQD-H01 Quick Charge Power Bank
User Manual
PPQD-H01 Quick Charge Power Bank
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefully before first use and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or
comments about the device, please contact the customer line.
Product parameter
| Model No.: | PPQD201 |
|---|---|
| Battery type: | Polymer battery |
| Capacity: | 20 000 mAh /3.8 V (76 Wh) |
| Rated capacity: | 12 000 mAh (5 V **** 3 A) |
| Energy conversion rate: | ?_75 % |
| iP Input: | 5 V ****2 A |
| Type-C Input: | 5V-3 A, 9V-2 A, 12 V ****1.5 A |
| USB Output: | 4.5 V 5A (SCP), 5 V 4.5 A (SCP), 5 V 3 A, 9 V 2 |
A, 12 V 1.5A
Type-C Output:| 5 V=3 A, 9 V 2.22 A, 12 V 1.67 A
iP Cable Output:| 5 V 2.4 A, 9 V 2.22 A
Total Output:| 5 V 3 A
Size:| 123 x 74.6 x 32.8 mm
Weight:| 360 g
Packing list
Product diagram
Product description
This product is a built-in iP fast charging output cable (9 V 2.22 A, maximum
20 W), compatible with multiple fast charging protocols, supporting Apple PD
20 W fast charging, Huawei SCP 22.5 W super-fast charging, Samsung AFC, QC
3.0, FCP, PE and other brands of mobile phone fast charging, dual input and 3
output portable power bank, can charge 3 devices at the same time, the product
has the characteristics of power digital display, Type-C two-way fast
charging, mini portability, built-in overcurrent, over-voltage, over-
temperature, short-circuit protection and other multiple safety protection
circuits.
Instructions for the use of products
Charging operation instructions
Charging your mobile phones or other digital devices by using Qpow Power Bank
- Check and make sure the charging voltage of your digital products is consistent with the voltage output of Qpow Power Bank.
- Select and use the original charging cable of your digital products, connect one end of it with your digital product, and the other end with the output port of Qpow Power Bank, then Qpow Power Bank automatically starts to charge your digital product, with the LED indicator lit all the time.
Charging Qpow Power Bank by using AC charger or PC USB port
- Select and use the original USB cable, connect the iP or Type-C port with the iP or Type-C input port of Qpow Power Bank.
- Connect the USB-A or Type-C connector with the USB port of AC charger or PC USB port, and the LED indicator begins to flash, that is charging Qpow Power Bank. While full charge the indicators become lit constantly.
Use environment
Use ambient temperature: non tropical area below 0°C to 35°C.
Icon description
The 5-year icon to the “effective life of environmental protection”, not
the product quality assurance period. Electronic products all contain toxic
and harmful substances such as lead, mercury and cadmium. Once they are
overused, toxic and harmful substances may leak or mutate, cause pollution to
the environment, or cause serious damage to people and property. The term of
“environmental protection uses” means that all electronic products will be
required to use within this affective period. We will no longer be responsible
for the quality of the products due to the safety risks that arise after the
safe use period.
Safety warning instructions tips
- Due to the existence of conversion efficiency, so rated output capacity is less than battery capacity.
- When you need to check the power, press the power button once and the LED indicator lights up to show the current power. In the connectionless state, the power will automatically sleep after about 30 seconds.
- Please charge your power bank periodically (at least one time with 5 months recommended) to maintain its long service life.
- Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
- Consumer shall be liable for any personal and property damage resulted from their improper use against the user manual or ignoring the warning, to which our company will not bear any legal liability.
- Disintegration of this product by non-professionals is strictly prohibited.
- Use of household appliances or loads more than the output current of this product shall be avoided (no output due to circuit protection).
- Intense physical actions including knocking, throwing, trampling on, and squeezing, etc. shall be avoided.
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2
years. If you need repair or other services during the warranty period,
contact the product seller directly, you must provide the original proof of
purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions,
for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
Identification data of the manufacturer’s / importer’s authorized
representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7 CIN:
27082440
Subject of the declaration:
Title: Power Bank
Model / Type: PPQD-H01 / H02 / H05
The above product has been tested in accordance with the standard(s) used to
demonstrate compliance with the essential requirements laid down in the
Directive(s):
Directive No. 2014/30/EU
Directive No. 2014/35/EU
Directive No. 2011/65/EU as amended 2015/863/EU
WEEE
This product must not be disposed of as normal household waste in
accordance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE – 2012/19 / EU).
Instead, it shall be returned to the place of purchase or handed over to a
public collection point for the recyclable waste. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product. Contact your local authority or
the nearest collection point for further details. Improper disposal of this
type of waste may result in fines in accordance with national regulations.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
www.alza.cz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>