Baseus 15W Wireless Charging Car Holder User Guide
- October 27, 2023
- Baseus
Table of Contents
15W Wireless Charging Car Holder
User Guide
WIRELESS CHARGING CAR HOLDER
QUICK CHARGE
15W
User Manual
Packing Detail
Wireless charging holder…………………..x 1
*Car air vent holder ………………… x 1
Type< charging cable ……………..x 1
sucker holder …………………………x 1
Note: optional with’
‘When charging wirelessly.The wireless charger with output power of SW/
10W/15W needs to be equipped with a car charger with 0C3.0 fast charge.
Product Specification
Input …………………………………DC9V/2.0A 5V/2.0A(MAX)
Output …………………………………….DC9V/1.67A 9V/1.12A 5V/1.0A
Input port……………………………………. Type-C
Working temperature …………………….-101C-55ºC
Wireless charging distance…………………….. 6mm Max
Charging convertlon rate………………………… 73%40%
Super Capacitor ………………………………………………Can be opened and closed 10 times with 5
minutes of power disconnected.
Intelligent protection
Output over voltage protection
When the product is wireless charging with coil temperature exceeds 60ºC, it
will stop charging and the red light will flash. When it with coil temperature
lower than 55ºC, it will start working.
Output Current protection
When the charger output current exceeds 2A,the charging stops and the red
light flashes to prevent damage to the phone.
Voltage Protection
When the charger output voltage exceeds the output rated voltage:the charging
stops torevent damage to the phone.
Foreign Object Detection
When the wireless charger detects a metal foreign object, it will stop
charging, and the indicator light flashes red and blue alternately.
Function Parts
Product appearance and parameters may be modified due to functional improvements.lf without notification,please refer to the actual product.
Operating environment and maintenance
- Do not use this product near a strong magnetic field.
- Do not use unapproved or incompatible power supplies or chargers as this may cause product failure, fire, explosion or other hazards.
- Please use this product in the temperature range of -10.10.5VC, and store it in the range of -20*C-+70%. When the ambient temperature is too high or too low, it can cause product failure, fire or explosion.
- Keep the equipment thy. Rain, moisture and all kinds of moisture can cause circuit damage.
- Stop using the product and disconnect the power to the product before cleaning and maintenance.
- Do not use cleaning products such as detergents or alcohol, but simply wipe with a clean, thy, soft cloth.
- Do not throw, knock, or forcefully pull the product components to avoid product failure.
- Do not disassemble or modify the product without permission, otherwise the product and accessories will not be covered by our warranty.
- In case of product failure, please contact the service center.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’ s authority to operate the equipment. This
equipment has been tested and found to comply with the limits fora Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Quick Installation
-
Assembly of products
Connect the wireless charger to the holderand you can choose to install the holder with rotary lifting function as required.The suction disc mounting holder. also can choose to install the outlet holder. -
Fixed products
Fix the assembled product and base holder to the appropriate posftion.A variety of installation methods can be obtained by adjusting the spherical fitting and two adjusting knobs.
-
Connecting power supply
Insert one end of the standard power cord into the input port of the wireless chargerAnother end is plugged Into a power sup* that meets the requirements of this manual.
Use introduction
-
Full automatic phone clip.
-
Placing the mobile phone:The charger holder dip is open when it is powered on.Hold the phone against the surface of the charger.The holder clip will automatically close to fix the phone.
-
Remove the mobile phone:While holding the mobile phone with your hand, press the push-open button with your finger,the holder will automatically open, and you can remove the mobile phone(the whole process can be completed with one hand).
-
Wireless charging.
This product has the wireless charging function,connects the wireless charger to the power suppfsand then will support Qi wireless.Charging the mobile phone of the charging protocol is fixed on the wireless chargerand the wireless charging reception area of the mobile phone is right.The charging sensor area of the Qi wireless charger.The mobile phone will start to charge automatically -
LEO status indicator.
Standby statepovaw is Dined ohm device to be charged is detected – Red lght ON
The device is being vices* charged or fully charged – Blue light ON
Metal foreign body detection – Red light blue lista flashes at the same tim
Compatible Products
IPHONE
(PHONE 8 Series
IPHONE X Series
PHONE XS Series
PHONE 11 Series
PHONE 12 Series
SAMSUNG
GAL AXY S Series
GALAXY Note Series
HUAWEI
HUAWEI P Series
HUAWEI Mate Series
MI
Ml 9
Ml 10
*Support almost all devices that re not on the list but support the Qi wireless charging standard.
Safety Cautions
Please read and follow the following instructions when using this product in the car
- When the mobie phone falls due to user error triggering or strong magnetic or electro static interferencbetc. The vehicle should be parked in the safety area of the road to pick up the mobile phone.Pteasedo not pick up the mobile phone while driving.
- Please keep In mind that safe driving is your first duty.Do not operate this Product while drivingor do some things which will distract you.
- Please do not install this product on the car airbag or airbag after expansion can bereached.Otherwise,whe the airbag infiatesthe product may tecompressed by the airbag to the occupants person and cause harm.
- Please check the firmness of the installation of this product regularly to avoid the loss of control of the vehicle and cause damage to the person.
WARRANTY CARD
user information| user name| | telephonenumber|
---|---|---|---|---
purchase time| | invoice number|
user address
product Information| product model| | product color|
product barcode|
other|
maintenance records
date| fault description| maintenance status| Signature
| | |
| | |
| | |
| | |
- Please fill in the relevant informatio on the warranty card after purchase.
- Please keep the warranty card as proof of warranty.