Baseus Bowie Series P1 Half In-Ear Neckband Wireless Earphones User Manual
- October 30, 2023
- Baseus
Table of Contents
Bowie Series P1 Half In-Ear Neckband Wireless Earphones
User Manual
Base’s Bowie Series P1 Half in-ear Neckband Wireless Earphones
Please read this user manual carefully before use and keep it for future
reference.
Connection Steps
-
Power on
Press and hold the multifunction button for 2s.
The earphones automatically enter the power-on state. -
Wireless connection
Turn on wireless mode on your phone to search and pair the earphones.
Select device model Base’s Bowie P1 -
Power off
Press and hold the multifunction button for 4s. The earphones will turn off
Operation Instructions
Music mode:
| Play/Pause: Press the multifunction button.
---|---
| Previous: Press and hold the Volume- button for 1.5s.
| Next: Press and hold the Volume+ button for 1.5s.
| Volume down: Press the Volume- button.
| Volume up: Press the Volume+ button.
| Switching to low latency mode: Double-press the multifunction button.
| Activating Voice Assistant: Press the multifunction button three times.
Call mode:
| Answer/Release a call: Press the multifunction button.
---|---
| Reject a call: Press and hold the multifunction button for 2s.
Charging power indicator
Connect to the power supply to charge the earphones (the red indicator is on
during charging. The blue indicator is on when the battery is fully charged).
Restore to default settings
Turn off the wireless on the mobile phone. Press and hold the Volume+ and
Volume- buttons simultaneously for 4s. When the blue indicator blinks 3 times,
the operation is successful.
Product safety information
Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
- The battery is included in the product. Please avoid exposing your product to the sunlight, electric heater or similar overheating environment’s. Do not store the product in high temperature, strong light and strong magnetic places.
- Do not keep it in other harsh environments such as fire source. Intense physical actions such as knocking, throwing, trampling on and squeezing etc. shall be avoided. Do not use it in case of expansion.
- The ambient temperature of product is 0~45℃ .
- Inappropriate use of the product against this user manual or ignoring warnings can easily cause damage the product or may endanger personal and property safety. Consumer shall bear for all the consequences, to which our company will not assume any legal liability.
- Decomposition of this product by non-professionals is strictly prohibited.
- Do not use a load (electrical appliances) that exceeds the output current of this product. A circuit protection mechanism is built-in to automatically stop working if loads exceed.
- Please use a clean cotton cloth to clean the charging contacts of earphones regularly to prevent it from failing to charge or turn on due to missing cleaning for a long time.
- Do not put this product in water (or washing machine). If water enters the product, let it dry naturally before using it.
Product Specifications
Name: Baseus Bowie Series P1 Half in-ear Neckband
Wireless Earphones
Model No.: Baseus Bowie P1
Version: V5.2
Communication distance: 10m
Playtime: 25 hours (70% of the volume)
Battery capacity: 170mAh/0.629Wh (earphones)
Earphone rating input: DC5V 100mA
Earphone rating consumption current : 7 mA
Charging time: about 1.5 hours
Frequency response range: 20 Hz-20 kHz
Charging port: Micro-USB
Suitable for: Compatible with most of wireless devices
Package Including
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
This equipment complies with the provisions of Directive
2012/19/EU、2006/66/EU. It is strictly forbidden to dispose of this equipment
with ordinary trash; it must be recycled. This symbol indicates that the
product shall not be treated as regular domestic trash, and must be delivered
to a recycling center that is capable of recycling electronic and electrical
equipment.
It is hereby declared that Basses Bowie P1，a product model of Shenzhen Base’s
Technology Co., Ltd., complies with the provisions of Directive 2014/53/EU and
Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be
found on the following website: www.baseus.com
Warning Please follow the above safety instructions otherwise it will
cause fire,electric shock,damage or other damage.
FCC ID：2A482-P1
Manufacturer: Shenzhen Base’s Technology Co., Ltd.
Add: 2th Floor, Building B, Base’s Intelligence Park, No.2008, Xuegang Rd,
Gangue Community, Bantian Street, Longing District, Shenzhen
Hotline: +86-4000-712-711 Website: www.baseus.com
PB3453Z-P1A1 1000050587
Designed by Base’s
Made in China
Documents / Resources
|
Baseus Bowie Series P1 Half In-Ear Neckband Wireless
Earphones
[pdf] User Manual
Bowie Series P1 Half In-Ear Neckband Wireless Earphones, Bowie Series, P1 Half
In-Ear Neckband Wireless Earphones, In-Ear Neckband Wireless Earphones,
Neckband Wireless Earphones, Wireless Earphones, Earphones
---|---