Baseus BS-CM023 Milky Way Pro Series Wireless Charring Electric Car Mount Phone Holder User Manual
- October 30, 2023
- Baseus
Table of Contents
BS-CM023 Milky Way Pro Series
Wireless Charring Electric Car Mount Phone Holder
User Manual
Product Specifications
Name: Baseus Milky Way Pro Series Wireless Charging Electric Car Mount
Phone Holder 15W Model No.: BS-CMO23
Input: Type-C: 5V-2.4A (Max.); 9V-2.23A (Max.); 12V-1.67A (Max.) Wireless
Charging Output: 5W/7.5W/10W/15W Working Temperature: Non-tropical areas, 0°C
to 35 °C
Product Schematic Design
- Wireless Charging
- Infrared induction
- Clamping arm
- Clamp feet
- Tail Hook
Installation
- Unscrew the nut and put it onto the ball joint
- Install the ball joint and fasten the nut
- Hook the mount to the vent grille and fasten the nut
Package Including
- Main Unit x 1
- USB-A to Type-C charging cable x 1
- Air vent tail hook x 1
- User Manual X1
User Tips
- Please use 5V-2A, 9V-2A, or 12V-1.67A adapters for this product.
- There must not be any metal objects between the wireless charging area and the phone, for it won’t be working.
- The working temperature of the product is between 0°C and 25°C, otherwise it may affect the charging efficiency.
- Please install the product onto the air vent gently to avoid damage.
- After long-time use, there might be loosening, please reinforce the mount if this happens.
- The coupling distance for wireless charging is 6mm, so if the phone case is too thick, it may affect the wireless charging efficiency.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user s authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance between 20cm the radiator your body.
| Part Description | Hazardous substances and elements |
|---|---|
| Lead (pb) | Mercury (HO |
Biphenyls
(PBB)| Polybrominated Biphenyl ethers (PBDE)
PCB| X| 0| 0| 0| 0| 0
Plastic| 0| 0| 0| 0| 0| 0
Accessory| 0| 0| 0| 0| 0| 0
Declaration on hazardous substances and elements contained in electronic
products
This form is compiled in accordance with SJ/T 11364.
0: It indicates that the content of the harmful substance in all homogeneous
materials of the component is below the limit specified in GB/T 26572
standard.
X: The content of harmful substances in at least one homogeneous material of
this part exceeds the limit stipulated in GB/T 26572 standard.
Warm Tip: The 10-year icon refers to the “effective life of environmental
protection”, not the product quality assurance period. Electronic products all
contain harmful substances such as lead, mercury and cadmium. Once they are
overused, harmful substances may leak or mutate, cause pollution to the
environment, or cause serious damage to people and property. The term of
“environmental protection use” means that all electronic products will be
required to use within this effective period. We will no longer be responsible
for the quality of the products due to the safety risks that arise after the
safe use period.
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2nd Floor, Building B, Baseus Intelligence Park,
No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District,
Shenzhen
Executive Standard: Q/BASEUS 019
Hotline: +86-4000-712-711
Website: www.baseus.com
Official After-sales E-mail
Address: service@baseus.com
(China) care@baseus.com (Global)
PB4352Z-P0A0 1100004543
Designed by Base’s lade in China
FCC I D :2A482-CMO23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>