nVent CADDY BC200000 EG Strut Beam Clip Owner’s Manual
- June 16, 2024
- nVent Caddy
Table of Contents
nVent CADDY BC200000 EG Strut Beam Clip
Product Information
Specifications
| Catalog Number | BC200000 EG |
|---|---|
| Material | Steel |
| Finish | Electrogalvanized |
| Flange Thickness (FT) | 1/2 |
| Hole Size (HS) | 9/16 |
| Width (W) | |
| Length (L) | |
| Thickness (T) | 1/4 |
| Static Load (F) | 460 lb |
| Screw Included | No |
FAQ
- Q: What is the maximum static load capacity of the strut beam clip?
- A: The maximum static load capacity of the strut beam clip is 460 lb.
- Q: Are screws included with the product?
- A: No, screws are not included with the strut beam clip.
- Q: Can I use this product with a different type of strut channel?
- A: The indicated loads are based on installation with strut channel type A. It is recommended to use this product with the specified strut channel type for optimal performance.
- Q: How do I contact nVent customer service?
- A: You can contact nVent customer service through the following numbers:
- Europe Netherlands: +31 800-0200135
- Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Product Usage Instructions
Installation
- Ensure you have the necessary hardware and tools for installation.
- Identify the appropriate location for the strut beam clip installation.
- Position the strut channel type A in the desired location.
- Place the strut beam clip over the flange of the strut channel.
- Align the holes of the clip with the holes on the flange.
- Secure the strut beam clip to the strut channel using 1/2 (M12) hardware.
- Tighten the hardware securely.
Important Safety Information
Please read and follow all safety instructions provided in nVent’s product instruction sheets and training materials. Failure to do so may result in product malfunction, property damage, serious bodily injury, or even death. You can find the instruction sheets at www.nvent.com or contact your nVent customer service representative for further assistance.
FEATURES AND SPECIFICATIONS
FEATURES
- Beam Clip for clamping the open side of strut to a beam
- Suitable for all strut channels
- Requires installation in pairs
- Structural attachment to beams to support nVent CADDY Eristrut
- FM® Specification Tested
SPECIFICATIONS
Catalog Number
|
Material
|
Finish
| Flange Thickness( FT)|
Hole Size(HS)
|
Width(W)
|
Length(L)
|
Thickness( T)
|
Static Load(F)
|
Screw Included
---|---|---|---|---|---|---|---|---|---
BC200000
EG|
Steel
| Electrogalvanized|
1/2″
|
9/16″
|
1.600″
|
2.730″
|
1/4″
|
460 lb
|
No
ADDITIONAL PRODUCT DETAILS AND DIAGRAMS
ADDITIONAL PRODUCT DETAILS
- Indicated loads are based on installation with 1/2″ (M12) hardware and strut channel type A.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
CONTACTS
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands: +31 800-0200135
Europe
- Germany: 800 1890272
- Other Countries: +31 13 5835404
APAC
- Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Our powerful portfolio of brands
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.