CERTA 20000MAH 3000a Portable Jump Starter User Guide

CERTA 20000MAH 3000a Portable Jump Starter

Specifications

• Model: CTJMPSTC30A
• Capacity: 20000mAh
• Output: Jumpstart output, USB-A output x2
• Input: USB-C input/output, Micro USB input
• Features: Wireless charging pad, LED flashlight

SAFETY

SAFETY & WARNINGS
Read all the instructions in this guide before using this product. Retain this guide for future reference.

• Do not use this jump starter if any cable, clamp, or cord is damaged.
• Do not connect two clamps when the jump starter is on.
• Do not connect both cable clamps to the same piece of metal as this may damage the jump starter.
• DO NOT use this jump starter to start a bulging or damaged car battery.
• Handle this jump starter with care. Avoid dropping or striking the product heavily and repeatedly.
• DO NOT disassemble or modify this jump starter.
• Keep this jump starter away from children and pets.
• If this product shows any sign of damage, swelling, leakage or odor, cease immediately and contact help.Kogan.com for support.
• Do not expose this product to fire or other sources of heat.
• Do not attempt to jump-start a vehicle continuously. Allow at least 30 seconds to 1 minute between starts.
•  To avoid damage, do not use the jump starter when the battery power is less than 10%.
• Before first use charge the jump starter for at least 3 hours to ensure it is fully charged.
• For normal use, please confirm that the unit has at least 50% power before use.
• If the positive clamp of the starting power is incorrectly connected to the negative poles of the car battery, the reverse polarity protection will enable to avoid personal injury and property damage.

COMPONENTS

• Jump starter
• Battery clamp
• USB-C charging cable
• User guide
• Carry bag

OVERVIEW

• Display
• Wireless charging pad
• Jump start output
• USB-C input/output
• Micro USB input
• USB-A output
• USB-A output
• Power button
• Light button
• LED flashlight

OPERATION

Charging The Portable Jump Starter

1. Connect a USB power adapter (not provided) to an electrical outlet. Connect the charging cable into the USB-C input on the jump starter and connect the other end into the power adapter.
2. Press the power button to switch the jump starter on. While charging, the percentage of battery capacity will illuminate on the display screen.
3. Unplug the USB-C cable when charging is completed.

Notes:

• Ensure the jump starter is charged for at least 3 hours for the first time.
• Use the provided USB-C cable to charge the jump starter.
• A power adapter is not provided.

Power Bank

1. Connect the jump starter to a device (i.e., smart phone, tablet, laptop or another electronic device) using a USB cable.
2. Press the power button to turn the jump starter on.
3. Disconnect the jump starter when charging is no longer required.

Jump Start a Vehicle

Notes:

• This jump starter is for a 12V vehicles (with petrol engines up to 7.0L petrol or diesel engines up to 4.5L) only.
• Ensure the battery power of the jump starter is more than 50% before using it to start a car.

1. Insert the plug of the battery clamp completely into the jump starter.
2. Press the power button ” will show up on the display.
3. Connect the red clamp to the positive terminal (+) of the car battery and connect the black clamp to the negative terminal (-) of the car battery.
4. Start the vehicle.
5. After the vehicle has started, remove the red and black clamps from the battery and then remove battery clamps from the jump starter.

Flashlight

• Press power button, then press the light button to turn on the flashlight.
• Press the power button to switch between the following modes: Solid, Flash, SOS and Off.
• The light has approximately 24 hours of continuous use when fully charged.

Battery Clamp LED Display

CLEANING & CARE

• Store the product in a shaded, well-ventilated area.
• DO NOT use detergents to clean this jump starter.
• DO NOT expose the jump starter to extreme temperatures for an extended period. The operating temperature of this jump starter is -20-60°C. The storage temperature of this jump starter must not exceed 50°C.
• Charge the battery of this jump starter at least once every three months.

SPECIFICATIONS

Charging time

| ****

USB-C

| PD60W AC adapter| Approx. 2 Hours
PD18W AC adapter| Approx. 5 Hours
Micro USB| Approx. 9 Hours
LED light power| White 1W
Working temperature| -20 °C ~+60 °C / -4 °F ~+140°F
Dimensions| 209x107x56.4mm

FAQ

• Q: How do I know if the jump starter is fully charged?
  • A: While charging, the percentage of battery capacity will illuminate on the display screen. When it reaches 100%, it is fully charged.

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>