BEAMS SCX10TM II 2WD Twin Pre Runner Suspension Convention Kit Instructions

BEAMS SCX10TM II 2WD Twin Pre Runner Suspension Convention Kit

Specifications

• Model: SCX10TM II
• Conversion Kit: I-Beam Kit
• Recommended Shock Upgrade: PRO634300 Big Bore Scaler Shocks
• Secondary Shock Mount Hardware: Not Included

Assembly Instructions

Before starting the assembly, please note the following:

• All items highlighted in green will be re-used during the installation of the conversion kit.
• All items highlighted in red will not be used.

Front Assembly

1. Remove and save for later use the following parts:
   • Steering Knuckles, Bearings
   • M3 BHCS from lower
   • M3 BHCS from running boards & rear lower links
2. Rear Cross Brace
   • M3 FHCS from shock
   • Steering Links
   • Front Suspension
   • Front Axle
   • Links
   • Rear Lower Suspension Links
3. Begin front assembly:
   • Driver Side Beam Assembly (Bag F)
   • Hardware Used (Actual Size): 1
   • Passenger Side Beam Assembly (Bag F)
   • Hardware Used (Actual Size): 2
   • Link Assembly (Bag D)
4. Hardware Used (Actual Size): 3
   • Steering Knuckle Assembly (Bag F)
5. Hardware Used (Actual Size): 4
   • Re-use stock kingpin screws
   • Steering Link from step 3 under knuckle
   • Re-use stock knuckle, bearings & hex
   • Repeat this step for the opposite side
   • Driver Side Steering Swingset & Shock Tower Assembly (Bag B, Bag C)
6. Hardware Used (Actual Size): 5
   • Tie Rod from step 3
   • Passenger Side Steering Link & Knuckle from step 4
   • Passenger Side Steering Swingset & Shock Tower Assembly (Bag C, Bag B)
7. Hardware Used (Actual Size): 6
   • Tie Rod connects driver & passenger side swingsets
   • Driver Side Steering Link & Knuckle from step 4
   • Drag Link from step 3
   • Full Steering Set Assembly
   • This is what your progress should look like.
   • Install Driver Side Swingset & Shock Tower (Bag F)
8. Hardware Used (Actual Size): 7
   • Install Passenger Side Swingset & Shock Tower (Bag F)
9. Hardware Used (Actual Size): 8
   • Install Radius Arms Into Center Skid Plate
10. Hardware Used (Actual Size): 9
    • Re-use stock lower link mounting screws
    • Install Front Driver’s Side Shock(s)
11. Hardware Used (Actual Size): 10
    • Re-use stock shock mounting screws
    • Important note: Driver side shock mounts behind beam arm
    • Install Front Passenger Side Shock(s)
12. Hardware Used (Actual Size): 11
    • Re-use stock shock mounting screws
    • Optional: Install a secondary bypass shock (no spring) for a super scale look!
    • Secondary shock mount hardware not included
    • Important note: Passenger side shock mounts in front of beam arm
    • Connect Servo Link to Servo Horn (Bag F)
    • Nice Job! Front Assembly Complete
13. Rear Assembly
    • Install Battery Tray (Bag C)
    • Hardware Used (Actual Size): 13
    • Re-use stock rear shock towers
14. Trailing Arm Mount Assembly & Install to Rear Axle (Bag C)
    • Hardware Used (Actual Size): 14
    • Install Trailing Arm Mount to Chassis (Bag C)
    • M3 Locknut (Bag C)
    • Repeat this step for the opposite side
15. I-Beam Conversion Kit Complete Add your tires, paint & trim a body, and you’re done and ready to rip! Make sure to check out Pro-Line’s recommended accessories to deck out your I-Beam .
16. Truck, listed on the kit product page on prolineracing.com

Thanks for joining the #RCBEAMTEAM! First things first: let’s remove some parts from your SCX10™ II to make room for the I-Beam Kit. Take note that all items highlighted in green will be re-used during installation of the conversion
kit, while items highlighted in red will not be used.

FULL STEERING SET ASSEMBLY

FRONT ASSEMBLY COMPLETE

BEGIN REAR ASSEMBLY

I-BEAM CONVERSION KIT COMPLETE

Add your tires, paint & trim a body, and you’re done and ready to rip! Make sure to check out Pro-Line’s recommended accessories to deck out your I-Beam Truck, listed on the kit product page on prolineracing.com

References

• Pro-Line Racing - Performance RC Parts, RC Bodies, and RC Tires and Wheels | Pro-Line

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>