nVent CADDY 12P4I Push In Conduit Clamp Owner’s Manual
- June 16, 2024
- nVent Caddy
Table of Contents
nVent CADDY 12P4I Push In Conduit Clamp Owner’s Manual
FEATURES
Push-in installation of conduit
Eliminates need for offset bending conduit
May be used for either vertical or horizontal installations
SPECIFICATIONS
Finish: invent CADDY Armor
Material: Spring Steel
Catalog Number| EMT Conduit Size| Outer Diameter(OD)| Hole
Size(HS)| Hole Type| Ultimate Static Load 1(F1)| Ultimate
Static Load 2(F2)
---|---|---|---|---|---|---
12P4I| 3/4″| 0.866″ Min, 1.181″Max,
0.752″ Nom| 1/4″| Threaded| 25 lb| 15 lb
16P4I| 1″| 1.181″ Min, 1.378″Max,
1.000″ Nom| 1/4″| Threaded| 25 lb| 15 lb
8P4I| 1/2″| 0.709″ – 0.866″| 1/4″|
Threaded| 25 lb| 15 lb
12P| 3/4″| 0.866″ – 1.181″| 9/32″|
Plain| 25 lb| 15 lb
16P| 1″| 1.181″ – 1.378″| 9/32″|
Plain| 25 lb| 15 lb
8P| 1/2″| 0.709″ – 0.866″| 9/32″|
Plain| 25 lb| 15 lb
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands: +31 800-0200135
France: +33 800 901 793
Europe
Germany: 800 1890272
Other Countries: +31 13 583540
APAC
Shanghai: + 86 21 2412 1618/19
Sydney: +61 2 9751 8500″
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent