Smart Radiator Thermostat Expansion Instruction Manual
- June 3, 2024
- Smart Radiator Thermostat Expansion
Table of Contents
****
Smart Radiator Thermostat Expansion
Thanks for your purchase!
The Hombli Smart Radiator Thermostat is a great choice for investing in energy
saving devices for yourself and your fellow residents. From now on you can
control the heating and energy usage in your home with our easy to use Hombli
app. In addition, you can create schedules and control the temperature for
different rooms, whether you’re at home or on the go. Follow the steps in this
manual to easily install your Smart Radiator Thermostat. Need extra help’
Visit the support page on our website:
support.hombli.com
What’s in the box?
-
3x Smart Radiator Thermostat
-
3x Danfoss RA adapter
-
3x Caleffi adapter
-
3x Giacomini adapter
-
6x AA-batteries
Installation
Follow the next steps to install the Smart Radiator Thermostat.
Remove your current radiator thermostat
Note:
If your installation includes manually operated taps, you have to call a
professional to replace them
Insert the 2 AA batteries
Press and hold the button on the side of the thermostat to remove the cover, insert the batteries and re-place the cover Wait until “LA” on the display stops flashing (30 sec)
Install the Smart Radiator Thermostat and tighten the ring
If it does not fit, you need an adapter. If the included adapters do not fit go to hombli.com/adapter to find an adapter that is suitable for your situation
Press the button
The display should start to flash “LA” again and the Smart Radiator Thermostat
will start calibrating. Wait until it stops flashing “LA”. After calibrating
the display will show “OF”.
Note:
if the calibration foils, reset the device by taking the batteries out and
reinserting them again.
Connect to the app
Follow all steps below to set up your Smart Radiator Thermostat.
Open the Smart USB Bluetooth Bridge and click on “add devices”
Tap “Add new device• to add the Smart Radiator Thermostat
Press and hold the knob of the Smart Radiator Thermostat for 5 seconds,
the display will show “-“
Tap “Continue· and follow the instructions in the app
Repeat these steps with the other Smart Radiator Thermostats.
Specifications
Smart Radiator Thermostat
- Battery lifetime: Up to 7,5 year
- Temperature setting accuracy: 0.5 °C
- Room temperature display range: O°C~50°C
- Operation temperature range: 5C-30C
- Wireless transmit range: Open distances 1 Om
- Power source: 2AA batteries (don’t use rechargeable batteries)
- Connection: M30’1.5mm
- Measurements :(il55mm’94mm
lmportant safety instructions
- Make sure you have read and under stood the manual before installing and using this product Only use this product in the ways desctibed in this manual
- This device is only suitable for indoor residential use
EU Declaration of Conformity
This device is in compliance with the essential requirements and other relevant provisions of the following EU Directives
- Directive2011/65/EU
- Directive2014/53/EU
A copy of the EU Declaration of Conformity is available at
www.hombli.com/compliance
Smart Radiator Thermostat
Wireless RF mode frequency band: 2.4 GHz
Maiximum transmitted power. 10.5 dBm
The WEEE symbol means that a device must be disposed of separately from
general house hold waste When a device reaches the end of its lifespan, it
must be taken to a designated waste collection point for safe disposal or
recycling. This conserves natural resources, protects human health and helps
the environment Details to this are defined by the national law of the
respective country
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>