Jumper 2AQAA-EZBOOKX8 Laptop User Manual
- June 1, 2024
- JUMPER
Table of Contents
Jumper 2AQAA-EZBOOKX8 Laptop
Product Specifications
- Operating System: Microsoft Windows 10
- Supports: Word, Excel, email (send & receive)
- Features: Wi-Fi, Bluetooth, Cortana
- Battery Charging: Up to 12 hours for initial startup
Product Usage Instructions
1. Handling and Care:
- Use in non-tropic areas below 2,000 meters.
- Avoid dropping the product to prevent damage.
- Keep away from rain, moisture, direct sunlight, and heat sources.
- Avoid using in strong static environments.
2. Cleaning and Maintenance:
- If liquid splashes on the product, close it immediately and wait for it to dry.
- Clean with a dry soft cloth or tissue paper if necessary.
- Handle with care, use a soft cloth for cleaning camera lenses.
3. Battery and Power:
- Charge the battery for at least 12 hours before initial startup.
- Use original AC adapter for charging to avoid damage.
- Do not disassemble the product yourself to maintain warranty.
4. Safety Precautions:
- Protect power cords from being stepped on or compressed by objects.
- Do not use incorrect batteries as it may cause explosions.
- Avoid excessive volume when using earphones to prevent hearing damage.
Frequently Asked Questions
- Q: Can I clean the product with water or other liquids?
- A: It is recommended to clean the product with a dry soft cloth or tissue paper. Avoid using liquids to prevent damage.
- Q: How long should I charge the battery for the initial startup?
- A: Charge the battery for at least 12 hours before the initial startup for optimal performance.
- Q: Can I disassemble the product to replace components?
- A: It is advised not to disassemble the product yourself to avoid voiding the warranty. Seek professional assistance for any component replacements.
FCC Statement This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: · Reorient or relocate
the receiving antenna. · Increase the separation between the equipment and
receiver. · Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. · Consult the dealer or an
experienced radio/TV technician for help. Caution: Any changes or
modifications to this device not explicitly approved by manufacturer could
void your authority to operate this equipment. This device complies with part
15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
RF Exposure This device complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment can be used as portable
exposure without any restriction.
SHENZHEN JUMPER TECHNOLOGY CO.,LTD 101, 102, 201, 301 No.13-2 Pingxi South Rd., Pingxi Community, Pingdi Street, Longgang District, Shenzhen, GuangDong
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>