Brilliant 21634/06 Smart Botanic LED Garden Spike Light 9w 3000k or RGB in Black Installation Guide

BOTANIC 9W WW GARDEN SPOTLIGHT
BLK – 21634/06

Before first using your new Brilliant BOTANIC GARDEN SPOTLIGHT, it is most important that you read and follow these instructions, even if you feel you are quite familiar with this type of product. Keep this document handy for future reference.

DIY INSTALLATION

For Your Safety

• To prevent electrical shock, please ensure the power is OFF before the installation.
• There are no user-serviceable parts within this kit.
• This product must be used only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. If you have questions, contact the manufacturer or local agent.
• If you aren’t familiar with this type of DIY fitting or unsure how to install it, please contact a licensed electrician for installation.

Part List:
A – LED Light Head.
B – Light Head Holder
C – Ground Mounting Spike Post.
D – Light Head Locking Screw.
E – 1.8m Cord.
F – 2 Pin Plug Splitter.
G – 2 Pin Connector.

SPECIFICATION:

THIS FITTING HAS NO SERVICEABLE PARTS

Installation:

1. ENSURE POWER IS SWITCHED OFF PRIOR TO INSTALLATION.

2. Locate a suitable or desired location to install the garden light.

3. This unit is designed to connect to a 12V DC power supply.

4. Keep the light away from any direct sources of heat such as hot water systems, air conditioning, and a fireplace.

5. Plug the 2-pin connector (G) into a 12V DC power supply (NOT INCLUDED).

6. If you have more than one light, plug the next light 2-pin connector (G) into the previous light 2-pin plug splitter (F).
   Ensure the power of the total number of lights connected are not exceed the 12V DC power supply.

7. Loosen the light head locking screw (D) to adjust the angle of the light you desired. After that tighten the light head locking screw.

8. Ensure all the cables and screw nuts are screwed in tightly and firmly to meet the IP 68 rating.

9. Check all the connections prior to turning on the main switch power.

Recommended Brilliant Compatible Devices (SOLD SEPERATELY):

12V DC Transformer| 12V DC Controller| Light Extension Cable| Light Conversion Cable
---|---|---|---
Model #: 19915/06 (24W)
Model #: 19916/06 (36W)
Model #: 19917/06 (60W)| DUSK-TO-DAWN
Controller – 21636/06
Smart WiFi Controller – 20701/06| 5m – 21638/06
10m – 19918/06| 2 pin – 21641/06

Accessory (SOLD SEPERATELY):

150 mm Extension Spike Rod –
Model #: 21639/06| 150 mm Spike – Model #:
21639SP001| Ground Mounting Base – Model #:
21640/06
---|---|---

Warranty:

Brilliant Lighting warrants this product against defects in manufacture and workmanship for a period of 2 years from the date of purchase or as specified elsewhere. For products used in non-domestic or commercial applications, Brilliant Lighting warrants this product for a period of 3 months from the date of purchase. This warranty is only valid for products installed and operated within the guidelines specified by Brilliant Lighting, and within the correct operating voltage ranges as stated on the product’s rating label. Warranty does not include damage or loss arising from incorrect installation, operation, or maintenance of this product, damage caused through modification, incorrect installation, service by unqualified or unauthorized personnel, or lack of regular maintenance and cleaning. Proof of installation by qualified personnel may be required, e.g. Electrical Safety Certificate. Proof of purchase must be supplied with all warranty claims.
This warranty is provided in addition to any other rights and remedies of the customer under any law. In applications not intended for household, personal or domestic use, liability is limited to replacement or reimbursement of the product only. Brilliant Lighting does not warrant the costs of removal or re- installation of this product or associated components. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if goods fail to be of acceptable quality and the failure does not amount to a major failure. Any claim under this warranty must be made within the specified warranty period from the date of purchase of this product. To make a claim under the warranty; at your own expense take the product (with proof of purchase – receipt or similar) to the store where you purchased the product or contact Brilliant Lighting at the address below.
This warranty is given by:

BOTANIC 9W WW GARDEN SPOTLIGHT
BLK – 21634/06

Before first using your new Brilliant BOTANIC GARDEN SPOTLIGHT, it is most important that you read and follow these instructions, even if you feel you are quite familiar with this type of product. Keep this document handy for future reference.

DIY INSTALLATION

For Your Safety

• To prevent electrical shock, please ensure the power is OFF before the installation.
• There are no user-serviceable parts within this kit.
• This product must be used only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. If you have questions, contact the manufacturer or local agent.
• If you aren’t familiar with this type of DIY fitting or unsure how to install it, please contact a licensed electrician for installation.

Part List:
A – LED Light Head.
B – Light Head Holder
C – Ground Mounting Spike Post.
D – Light Head Locking Screw.
E – 1.8m Cord.
F – 4 Pin Plug Splitter.
G – 4 Pin Connector.

SPECIFICATION:

THIS FITTING HAS NO SERVICEABLE PARTS

Installation:

1. ENSURE POWER IS SWITCHED OFF PRIOR TO INSTALLATION.

2. Locate a suitable or desired location to install the garden light.

3. This unit is designed to connect to a 12V DC power supply.

4. Keep the light away from any direct sources of heat such as hot water systems, air conditioning, and a fireplace.

5. Plug the 2-pin connector (G) into a 12V DC power supply (NOT INCLUDED).

6. If you have more than one light, plug the next light 2-pin connector (G) into the previous light 2-pin plug splitter (F).
   Ensure the power of the total number of lights connected are not exceed the 12V DC power supply.

7. Loosen the light head locking screw (D) to adjust the angle of the light you desired. After that tighten the light head locking screw.

8. Ensure all the cables and screw nuts are screwed in tightly and firmly to meet the IP 68 rating.

9. Check all the connections prior to turning on the main switch power.

Recommended Brilliant Compatible Devices (SOLD SEPERATELY):

12V DC Transformer| 12V DC Controller| Light Extension Cable| Light Conversion Cable
---|---|---|---
Model #: 19915/06 (24W)
Model #: 19916/06 (36W)
Model #: 19917/06 (60W)| Smart WiFi Controller – 20701/06| 5m – 21638/06| 4 pin RGB – 21643/06

Accessory (SOLD SEPERATELY):

150 mm Extension Spike Rod – Model #: 21639/06| 150 mm Spike – Model #: 21639SP001| Ground Mounting Base – Model #: 21640/06
---|---|---

Warranty:
Brilliant Lighting warrants this product against defects in manufacture and workmanship for a period of 2 years from the date of purchase or as specified elsewhere. For products used in non-domestic or commercial applications, Brilliant Lighting warrants this product for a period of 3 months from the date of purchase. This warranty is only valid for products installed and operated within the guidelines specified by Brilliant Lighting, and within the correct operating voltage ranges as stated on the product’s rating label.
Warranty does not include damage or loss arising from incorrect installation, operation or maintenance of this product, damage caused through modification, incorrect installation, service by unqualified or unauthorized personnel or lack of regular maintenance and cleaning. Proof of installation by qualified personnel may be required, e.g.  Electrical Safety Certificate. Proof of purchase must be supplied with all warranty claims.
This warranty is provided in addition to any other rights and remedies of the customer under any law. In applications not intended for household, personal or domestic use, liability is limited to replacement or reimbursement of the product only. Brilliant Lighting does not warrant the costs of removal or re- installation of this product or associated components.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if goods fail to be of acceptable quality and the failure does not amount to a major failure.
Any claim under this warranty must be made within the specified warranty period from date of purchase of this product. To make a claim under the warranty; at your own expense take the product (with proof of purchase – receipt or similar) to the store where you purchased the product or contact Brilliant Lighting at the address below.
This warranty is given by:

Brilliant Lighting (Aust) Pty. Ltd.
ABN 37 006 203 694
956 Stud Road Rowville, VIC 3178
Phone: 03 9765 2555
Email: Warranty@brilliantlighting.com.au
Web: www.brilliantlighting.com.au
MADE IN CHINA

References

• brilliantlighting.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>