Bracwiser ML7802 Dual Monitor Stand Free Standing Desk Mount Installation Guide
- June 16, 2024
- Bracwiser
Table of Contents
Bracwiser ML7802 Dual Monitor Stand Free Standing Desk Mount
Unboxing Instruction
Please open the box carefully and take off protection such as lining and
covers.
Check all parts make sure all components and parts are not damaged. Do not use
damaged components or parts.
Read this manual before installation.
Important Safety Information
Please be careful during installation and operation. Read this manual before
installation. Follow the manual and use tools as advised in the package.
Installation need to be completed by professional or under others help. Do not
disassemble any components if there is no instruction in the manual. We are
not responsible for any loss due to incorrect installation or incorrect use of
this item.
PARTS
INSTALLATION STEPS
Step 1 Install the Pole on a Desk
Base installation
Loosen pre-positioned screws in the base with wrench (i), get upper base (b)
and lower base (c). Align supporting leg U) with upper base (b) and lower base
(c), tighten screws with wrench (i).
Connect base and pole
Connect base and pole(a) with 3 pieces of M5x18 screws (f) and tighten with
wrench (i).
Step 2 Connect Head Sleeve and Pole
1. Place wire clip (g) on pole (a).
2. Place head sleeve (d) on pole (a). Tighten with wrench (i) at proper
position.
Step 3 Connect VESA Plate and Monitor
Step 4 Connect Monitor and Mount
Step 5 Angle Adjustment of Head Sleeve
Step 6 Cable Management
we hope you never have the need, but if you do,our service is friendly and hassle-free.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>