Bracwiser ML7442 Dual Monitor Arm Stand Instruction Manual
- June 14, 2024
- Bracwiser
Table of Contents
Bracwiser ML7442 Dual Monitor Arm Stand
Unboxing Instruction
- Please open the box carefully and take off protection such as lining and covers.
- Check all parts make sure all components and parts are not damaged. Do not use damaged components or parts.
Read this manual before installation.
Important Safety Information
- Please be careful during installation and operation. Read this manual before installation. Follow the manual and use tools as advised in the package.
- Installation needs to be completed by a professional or under others’ help. Do not disassemble any components if there is no instruction in the manual. We are not responsible for any loss due to incorrect installation or incorrect use of this item.
PARTS
WARNING
This monitor desktop mount must be securely attached to the horizontal desk. If the mount is not properly installed it may fall, resulting in possible injury and/or damage.
INSTALLATION INSTRUCTION
Step l Install the Pole on a Desk
Base installation Loosen pre-positioned screws in the base with a wrench (i),
get upper base (b) and lower base (c). Align supporting leg U) with upper base
(b) and lower base (c), tighten screws with wrench (i).
Connect base and pole Connect base and pole(a) with 3 pieces of M5x18 screws
(f) and tighten with a wrench (I).
Step 2 Connect the Swivel Arm and Pole
- Place pole wire clip (g) on the pole (a).
- Place arm wire clip (h) on the swivel arm (d).
- Place swivel arm (d) on pole (a). Tighten with a wrench (i) at the proper position.
Step 3 Connect the VESA Plate and Monitor
Step 4 Connect Monitor and Mount
Drive screw pre-positioned in the plate into the screw hole in head sleeve
Step 5 Angle Adjustment of Head Sleeve
Adjust the head sleeve according to the needs in case of sagging of the
monitor.
To adjust the height of the monitor, tighten or loosen the screw, fix the
plate by tightening nut at the proper position.
Step 6 Cable Management
we hope you never have the need, but if you do, our service is friendly and
hassle-free.
after-sales@bracketwiser.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>