Bracwiser MD82 17 Inch Hold Monitors Installation Guide
- June 16, 2024
- Bracwiser
Table of Contents
INSTALLATION MANUAL
MD82 Hold monitors: 17″ -27″
Weight capacity: 2.2-13.2 lbs (1-6kg)
Compatible VESA patterns: 75x75mm/100xl00mm
WARNING!
Incorrect installation may cause loss of life, personal injury and damage of
property. Please read the following information before installation.
If you do not understand the manual or meet any problem, please contact your
local qualified installation person.
If any of the parts are damaged or lost, do not install it. If you need to
exchange parts, please contact retailer.
This item holds 17″ -27″ LCD monitors less than 13.2lbs weight.
This item is simple and easy to install on a desk or disassemble.
To ensure security, the capacity of the desk need to be over 3 times of the
weight of all loading (include mount, monitor and its accessories).
Do not use this item for any purpose or in any configuration not explicitly
specified in this instruction.
For safety, be careful with the slideable parts of the item.
Be careful with the wires when installation of the monitor.
We are not responsible for: reformed or incorrect installation, beyond the
capacity, damage during usage.
Parts
Install the main mount on a desk
Install the monitor on the main mount
Cable management
Adjustment of torque force
+: Increase torque force
– : Decrease torque force
- The monitor could stop at any height after hung on the mount. No adjustment needed.
- The monitor bounces itself after hung on the mount. Press down the monitor with one hand and make sure the arm is horizontal. Use S5 wrench and turn the screw in “-” direction with the other hand (little by little) until the monitor can stop at any height.
- The monitor falls itself after hung on the mount. Raise the monitor with one hand and make sure the arm is horizontal. Use S5 wrench and turn the screw in “+” direction with the other hand (little by little) until the monitor can stop at any height.
Adjustment of joints
Adjustment of torque force after installation
WARNING
1. Make sure the monitor is hung on the mount before adjustment.
2. Make sure the weight of monitor is within the capacity.
We hope you never have the need, but if you do, our service is friendly and
hassle-free.
: [email protected]
Documents / Resources
|
Bracwiser MD82 17 Inch Hold
Monitors
[pdf] Installation Guide
MD82, MD82 17 Inch Hold Monitors, 17 Inch Hold Monitors, Hold Monitors,
Monitors
---|---