ROLL-A-SHADE RASOCMTRVER.1 Plus Shade Instruction Manual

: June 16, 2024
: ROLL-A-SHADE

Table of Contents

ROLL-A-SHADE RASOCMTRVER.1 Plus Shade
Specifications
Product Usage Instructions
Operation and Cleaning of Motorized
Recommended Cleaning Methods
FAQ
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ROLL-A-SHADE RASOCMTRVER.1 Plus Shade

ROLL-A-SHADE-RASOCMTRVER.1-Plus-Shade-PRODUCT

Specifications

Model: RASOCMTRVER.1
Dimensions: Not specified
Weight: Not specified
Power Source: Motorized
Controls: Buttons with up and down arrows

Product Usage Instructions

Lowering the Shade

Locate the button on the left side of the shade control panel with a down arrow symbol.
Press the down arrow button to start lowering the shades.
If you have a specific desired length, press the stop button(located above the up/down controls) when the shades reach that length.

Raising the Shade

Locate the button on the right side of the shade control panel with an up arrow symbol.
Press the up arrow button to start raising the shades.
If you have a specific desired length, press the stop button(located above the up/down controls) when the shades reach that length.

Recommended Cleaning Methods

Cleaning the Shade Material
To clean the shade material, follow these steps

Ensure that the shades are fully raised and stop using the stop button.
Gently wipe the shade material using a soft, lint-free cloth or feather duster. Start from the top and work your way down.
If there are stains or dirt that cannot be removed with a dry cloth, dampen the cloth slightly with water and gently wipe the affected area.
Avoid using harsh chemicals, solvents, or abrasive cleaners, as they may damage the shade material.

Operation and Cleaning of Motorized

Lowering the Shade
Press the button on the left with the down arrow to lower the shades. If there is a specific desired length press the stop button (above the up/down controls) when at the length.

Raising the Shade
Press the button on the right with the up arrow to raise the shades. If there is a specific desired length press the stop button (above the up/down controls) when at the length.

ROLL-A-SHADE-RASOCMTRVER.1-Plus-Shade-FIG-1

Warnings

Limits are set on the shades causing them to raise or lower to a comfortable length. Do not try to raise or lower the shades past this as it may damage the shade or remote.
Pulling the bottom of the shade may damage the motor, brackets, or shade, which can cause the shade to become inoperable.

Recommended Cleaning Methods

Cleaning the Shade Material

Dusting: Regular dusting maintains a like-new appearance of shades.
Vacuuming: For deeper cleaning, vacuum gently with a brush attachment.
The best method of cleaning is by regular washing of the fabric using a solution of warm water and mild detergent. Removing window shades may void the manufacturer’s warranty and or damage the motors
It is recommended that cleaning occurs at a time of day that allows the shades to dry while in the “down” position (overnight).

FAQ

Q: Can I use the shade manually?
- A: No, the RASOCMTRVER.1 shade is motorized and can only be operated using the control buttons.
Q: What should I do if the shade gets stuck?
- A: If the shade gets stuck during operation, first try pressing the stop button to stop the movement. Check for any obstructions or tangled cords that may be causing the issue. If the problem persists, contact customer support for assistance.
Q: Is it safe to leave the shade lowered for extended periods?
- A: It is generally safe to leave the shade lowered for extended periods. However, it is recommended to periodically raise the shades to prevent any potential damage or wear due to prolonged exposure to sunlight or other environmental factors.

CONTACT