BEGA 85 048 Bollard Head Instructions

: June 16, 2024
: BEGA

Table of Contents

BEGA 85 048 Bollard Head
Product Information
Product Usage Instructions
FAQ
Dimensions
Instructions for use
Product Description
Safety
Installation
Cleaning · Maintenance
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 85 048 Bollard Head

Product Information

Specifications

Lamp Module connected wattage: 7.8 W
Luminaire connected wattage: 9 W
Rated temperature: 25°C – 65°C
Ambient temperature: 85 048 K3
Module designation: 2x LED-1355/830
Colour temperature: 3000 K
Colour rendering index (CRI): >80
Module luminous flux: 1350 lm
Luminaire luminous flux: 940 lm
Luminaire luminous efficiency: 104.4 lm/W

Product Usage Instructions

Installation

To install the luminaire, follow these steps:

Insert the bollard head into the bollard tube and turn it clockwise as far as it will go.
Adjust the position if necessary and fix it with the lateral hexagon socket head screw.
Open the connection box.
Lead the luminaire wiring and mains supply cable through the cable entry into the connection box.
Make the earth conductor connection and the electrical connection.
Close the connection box.
Place the luminaire onto the mounting plate, adjust its position, and fix it securely.

Please note: Do not remove the desiccant bag from the luminaire housing as it is needed to remove residual moisture.

FAQ

Q: Are the electronic components in the luminaire protected against overvoltage?
A: Yes, the electronic components installed in the luminaire are protected against overvoltage per DIN EN 61547. However, for additional protection against transients, we recommend using separate overvoltage protection components available on our website.
Q: Who can carry out the installation and commissioning of the luminaire?
A: The installation and commissioning of the luminaire should only be carried out by a qualified electrician. Improper use or installation may cause damage, and the manufacturer does not accept liability for such damage.

Dimensions

BEGA-85-048-Bollard-Head-FIG-1

Instructions for use

Application

Bollard head with shielded light. Light exit 360°.
The light is deflected through a conical reflector onto the surface to be illuminated.
For usage in the modular system bollard range.

Product Description

Luminaire made of cast aluminium, aluminium and stainless steel
BEGA Unidure® coating technology
Colour graphite or silver Clear safety glass
Silicone gasket
All-side light output 360°
Suitable for bollard tube ø 140 mm
Connecting cable H05VV-F 3 G 1@
Cable length 1,2 m
BEGA Ultimate Driver®
LED power supply unit 220-240 V 0/50-60 Hz
DC 176-280 V
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Protection class IP 65
Dust-tight and protection against water jets
Impact strength IK10
Protection against mechanical impacts < 20 joule – Conformity mark
Weight: 2.6 kg
This product contains light sources of energy efficiency class(es) C

Dark Sky
The light of this luminaire is directed evenly and highly efficiently onto the surface to be illuminated. No light is emitted into the upper half-space of the luminaire.

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage per DIN EN 61547.
To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Lamp

Module connected wattage 7.8 W
Luminaire connected wattage 9 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 65 °C

85 048 K3

Module designation 2x LED-1355/830
Colour temperature 3000 K
Colour rendering index CRI > 80
Module luminous flux 1350 lm
Luminaire luminous flux 940 lm
Luminaire luminous efficiency 104,4 lm / W

85 048 K4

Module designation 2x LED-1355/840
Colour temperature 4000 K
Colour rendering index CRI > 80
Module luminous flux 1420 lm
Luminaire luminous flux 989 lm
Luminaire luminous efficiency 109,9 lm / W

Installation

Insert the bollard head into the bollard tube and turn it clockwise as far as it will go, adjust if necessary and fix with a lateral hexagon socket head screw.
Open the connection box.
Lead the luminaire wiring and mains supply cable through the cable entry into the connection box.
Make the earth conductor connection and the electrical connection.
Close the connection box.
Place the luminaire onto the mounting plate, adjust and fix it.

Cleaning · Maintenance

Clean the luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high-pressure cleaners.

Please note

Do not remove the desiccant bag from the luminaire housing.
It is needed to remove residual moisture.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the
LED module.
Inspect and, if necessary, replace the luminaire gaskets.
The defective glass must be replaced.
Close the luminaire.

Spares