PowerLocus Multi-Function 4in1 Wireless Stereo Headphones User Manual

June 4, 2024
PowerLocus

PowerLocus Multi-Function 4in1 Wireless Stereo Headphones

Product indication

PowerLocus-Multi-Function-4in1-Wireless-Stereo-Headphones-
fig-1

  1. Power on /off
  2. play/pause,answer/end calls,reject call,last number redial
  3. + Volume up(Long Press)/Next song(Short Press)
  4. Volume down(Long Press)/Last song(Short Press)
  5. M Multi-function button(pairing,auto search radio)
  6. Headset jack
  7. LED indicator
  8. Micro USB charging port
  9. Microphone
  10. Micro SD/TF card slot

Power on/off the headset

  • Power on: Slide the switch right and the blue and red indicator light will flash(the headset said: the wireless is ready to pair ).
  • Power off: Slide the switch left and the blue indicator light will go off.

Pair to your mobile phone or other products

  • Slide the switch right and the blue and red indicator light will flash(the headset said: the wireless is ready to pair ).
  • Turn on the Bluetooth function of your phone or other products.
  • Search for the Bluetooth devices and select’s-812’.(Enter the code ‘0000’ if needed)
  • If the pairing is successful, the blue light indicator starts flashing(the headset said: the wireless is connected successfully).
  • Please make sure the headphone is working before pairing.
  • It will connect to the pre-set phone automatically when turns on(Please make sure the Bluetooth function of your phone is working)
  • If the pairing is not successful, please switch off the headset first, and then re-pair again.

MP3/FM

  • In power-on mode, insert the TF card, short press M the button, and MP3 will play automatically.
  • If have not a TF card, or a short press the M button, and the FM radio will play automatically.
  • In power-on mode, short press the button, and the FM radio will play automatically. Long press the button to auto search all radio stations, wait for a moment, then short press or + , you will listen to any radio station you like.
  • If you are listening to FM radio, a short press M button will be converted you to bluetooth mode. And auto-connected to your phone or other products.

Answer/end calls reject a call, last number redial(In the Bluetooth mode)

  • When there is a call, a short press button can answer the call. After the call, press the button can hang up. If the other side hangs up, no need to press the button.
  • reject call: long press button about 2-3seconds
  • the last number redial: press fast button 2 times
  • When the phone calls out or answers the call, if the Bluetooth headphone is playing the music, the music will pause automatically and enter the waiting state. After hanging up, the music will continue to play automatically.

Charging the headset

  • Insert a USB charging cable into a USB port which have support 5V power (such as AC/DC USB adapter or PC USB port). When the red light is on, the headset is in charge. When the red light will be off, the headset is fully charged. It takes about 2-2.5 hours to charge the headset fully.
  • The battery is rechargeable. Low-Voltage alert: When the alert tone ‘low battery’ sounds and the indicator turns red indicates that the battery has run out, and needs to be charged as soon as possible.First-time charging: please be sure the battery has been charged fully before use.

Wired headphone function

For any mode of headphones, you can connect one side of the 3.5 stereo sound supply extension line to the headphone audio jack, and the other side connects to the Audio jack(such as mobile phones, computers, Ipad, etc). Then you will hear songs from other devices.

Precautions

  1. Please be gentle when using headphones. The Maximum tolerance of the button is 250g. Excessive force or being stroked by something all will damage buttons.
  2. Please do align the USB port when plugging or pulling the USB cable in case that damages the USB cable fail to charge the headphone.
  3. When encountering something similar to interference. please first delete the Bluetooth devices that connected with headphones before, then restart your phone,at last please repair with the Bluetooth headphone.
  4. If long time without using a headset, it is recommended to turn off the headset,in case the battery is in a low voltage state, causing charging problems.
  5. Please don’t put the headset in a hot temperature area.
  6. Please don’t vibrate or shock the headset violently, and do not let it fall down from a high place.
  7. If there is no response from the headset, Pls insert the headphone plug hole to reset by the tool.

CONTACTS

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

PowerLocus User Manuals

Related Manuals