Kanlux BORD XS DLP Ceiling Mounted Spotlight Fitting User Manual
- June 11, 2024
- Kanlux
Table of Contents
BORD XS DLP Ceiling Mounted Spotlight Fitting
User Manual
2022/08-1
A3-297x420mm/ISO216
www.kanlux.com
BORD XS DLP / GORD XS DLP
BORD XS DLP Ceiling Mounted Spotlight Fitting
INTENDED USE / APPLICATION
Product designed to be used in the home and for other similar general applications.
MOUNTING
Product has a protective contact/terminal. Failure to connect the protective
lead may lead to electric shock. Technical changes reserved. Read the manual
before mounting. Mounting should be performed by an appropriately qualified
person. Any activities to be done with disconnected power supply. Exercise
particular caution. Mounting diagram: see pictures. Check for proper
mechanical fastening and connection to electrical power prior to first use. The
product can be connected to a supply network which
meets energy quality standards as prescribed by law. Do not touch the lamp
with bare hands.
FUNCTIONAL CHARACTERISTICS
Product for indoor use. Energy efficient light sources can be used in this product.
USAGE GUIDELINES / MAINTENANCE
Any maintenance work must be performed when the power supply is cut off and the
product has cooled down. Clean only with soft and dry cloths. Do not use
chemical detergents. Do not cover the product. Product may heat up to a higher
temperature. Adjustment of lighting direction and/or replacement of the light
source must be done when the product has cooled down. Product must not be used
in unfavourable conditions, e.g. dust, water, moisture, vibrations, explosive
air atmosphere, fumes, or chemical
fumes, etc.
EXPLANATIONS OF SYMBOLS USED
P1: Rated voltage, frequency.
P2: Maximum power of the light source.
P3: LED lamp.
P4: Base / holder.
P5: Product meets the requirements of EU directives.
P6: Protection against solid foreign objects bigger than 12mm provided.
P7: Class I. A product in which protection against electric shock is provided
not only by means of basic insulation but also through additional safety
measures, i.e. extra protective circuit to which protective conductor of the
fixed feeding installation needs to be connected.
P8: Use only indoors.
P9: The symbol describes the minimal distance of a light fixture (its light
source) from the spots and objects that it’s illuminating.
P11: The product not suitable for covering with heat-insulating material.
P12: Certificate of Conformity confirming the quality of production in
accordance with approved standards on the territory of the Customs Union.
P13: The product is compliant with all relevant United Kingdom regulations.
P14: The product meets the requirements of technical regulations applicable in
Ukraine.
ENVIRONMENTAL PROTECTION
Keep your environment clean. Segregation of post-packaging waste is
recommended.
P15: This labelling indicates the requirement to selectively collect waste
electronic and electrical equipment. Products labelled in this way must not be
disposed of in the same way as other waste under the threat of a fine. These
products may be harmful to the natural environment and health, and require a
special form of recycling/neutralising. Information on collection centres is
provided by local authorities or sellers of such goods. Used items can also be
returned to the seller when new product is purchased, in quantity no larger
than the purchased item of the same type. The above rules regard the EU area.
In the case of other countries, regulations in force in a given country must
be applied. Contacting the distributor of our products in a given area is
recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns, electrical
shock, physical injury and other material and non-material damage. For more
information about Kanlux products visit
www.kanlux.com.
Kanlux SA shall not be responsible for any damage resulting from the failure
to follow these instructions. Kanlux SA reserves the right to make changes in
the manual -the current version can be downloaded at
www.kanlux.com. 
