PowerLocus P1 Kids Bluetooth Headphones User Manual

June 14, 2024
PowerLocus

PowerLocus P1 Kids Bluetooth Headphones

PowerLocus-P1-Kids-Bluetooth-Headphones-PRODUCT

Product Information

The PowerLocus P1 Kids is a wireless headphone designed for kids. It features a multi-function button, volume control buttons, FM/MP3/Bluetooth mode switch button, call button, micro-SD card slot, USB-C charging port, Bluetooth connection status indicator, 3.5mm AUX jack, and a microphone. The headphone uses Bluetooth Version V5.3 and has a working distance range of 10 meters. It has audio drivers of 40mm and an impedance of 32 Ohms. The headphone weighs 175g/0.39LBs and has a charging voltage of DC 5V. It takes about 1.5 hours to fully charge and provides a talking/music time of approximately 20 hours at 50% volume. The frequency range is 20Hz-20kHz.

Product Usage Instructions

Power On/Off

To power on the headset, simply press and hold the multi-function button. To power off, repeat the same action.

Connect with a Mobile Device

Wireless Connection:

  1. Turn on the headset and wait until the Bluetooth connection status indicator appears.
  2. On your mobile device, enable Bluetooth and search for the PowerLocus P1 Kids.
  3. Select the headset from the list of available devices to connect. You will hear a voice prompt confirming the connection.

Wired Connection:

  1. Connect one end of the provided 3.5mm audio cable to the audio jack of the headset.
  2. Connect the other end of the cable into your mobile device.
  3. Note that the microphone only works with a wireless connection. When using the 3.5mm audio cable, volume adjustment and song-switching functions must be operated from the mobile device.

Function Overview

When using the headset with an Android device, if you have adjusted the volume to the maximum level but still find it too low, please also turn up the volume on your mobile device. Additionally, when using the 3.5mm audio cable to listen to music, the volume adjustment and song-switching functions can only be operated from a mobile device.
To activate Siri/Google Assistant, long press the call button.

Charging

  1. Connect one end of the USB cable to the micro USB port on the headset.
  2. Connect the other end of the USB cable to a USB wall outlet or a compatible adapter (not included), then plug it into a socket.
  3. A solid red light will indicate that the headset is charging. The red light will disappear when the headset is fully charged.
  4. It is recommended to charge the headset when it is turned off. It may take around 3 hours to reach a full charge. When the battery is low, please charge it timely.

How to Reset the Headphones?

To reset the Bluetooth and enter pairing mode again, hold both the – button and + button for 4-7 seconds.
Important: Please refer to the EU declaration of conformity available at powerlocus.com/doc for compliance information.
Warning: This device complies with Part 15 of the FCC Rules. It may not cause harmful interference and must accept any interference received, including interference that may cause undesired operation.

Email Support : info@powerlocus.com

PRODUCT OVERVIEW

PowerLocus-P1-Kids-Bluetooth-Headphones-FIG-
\(1\)

  1. Multi-function button
  2. ”-” button
  3. “+” button
  4. FM/MP3/Bluetooth mode switch button
  5. Call button
  6. Micro-SD card slot
  7. USB-C Charging Port
  8. Bluetooth connection status indicator
  9. 3.5mm AUX jack
  10. Microphone

FEATURES

  • Bluetooth Version: V5.3
  • Working Distance Range: 10M
  • Frequency Range: 20Hz-20kHz
  • Audio Drivers: Φ40mm
  • Charging Voltage: DC 5V
  • Charging Time: About 1.5 Hours
  • Talking/Music Time: About 20 Hours (50% Volume)
  • Impedance: 32 Ohms
  • Weight: 175g/0.39LBs

POWER ON/OFF

  • Power on: Press and hold the Power Button for about 2 seconds until you hear a voice prompt of “Power On” and “Pairing”, then release. The LED
  • Power off Option 1: Press and hold the Power Button for about 2 seconds until you hear a voice prompt of “Power Off”, then release. The LED Indicator will be off.
  • Option 2: If the headset is not connected to any device within 10 minutes, it will be powered off automatically.

CONNECT WITH A MOBILE DEVICE

WIRELESS CONNECTION CONNECT WITH A MOBILE DEVICE

Step 1: After turning the headset on, wait until you see the LED Indicator flash red and blue alternately, which indicates the headset is ready to be paired to the mobile device.
Step 2: Turn on the Bluetooth on your device, then search and connect to the already appearing PowerLocus P1 Kids.
Step3: There will be a voice prompt of “Connected” and the LED Indicator will flash blue slowly if there is music playing and be a steady blue light if no music is played.
Tips : Please connect the headset to your mobile device within 10 minutes.

DISCONNECT
Go to the Bluetooth list of your mobile device, then select PowerLocus P1 Kids and disconnect the headset. You will hear a voice prompt of “Disconnected”

Switch Mode – 85dB / 94dB
To change the volume sensitivity hold the + and – buttons at the same time till you hear the voice prompt “85dB” or “94dB”

WIRED CONNECTION

  • Step 1: Connect one end of the 3.5mm Audio Cable to the Audio Jack of the headset.
  • Step 2: Connect the other end into your mobile device.

Tips:
The microphone only works with wireless connections. When listening to music using the provided 3.5mm audio cable, the volume adjustment and song-switching functions can only be operated by the mobile device

FUNCTION OVERVIEW

MUSIC:

  • Play/pause music: short press “multi-function” button
  • Next song: long press “+” button
  • Previous song: long press “-”button
  • Volume up: short press “+” button
  • Volume down: short press “-” button

Tips:

  • For Android device, if you have adjusted the volume by the headset to the maximum level, but still feels it is too low, please turn up the volume on your mobile device as well.
  • When using the 3.5mm audio cable provided to listen to music, the functions of volume adjustment and song switching can only be operated by the mobile device.

CALLS:

  • Redial: double-click the call button to redial the last call number
  • Answer the call: Click the call button when call is coming
  • End the call: click the call button to end the call
  • Reject the call: long press the call button to reject the call

ACTIVATE SIRI/GOOGLE ASSISTANT

Long press the call button to wake up Siri

CHARGE
Please charge the headset with the USB cable provided before your first use.

  • Step 1: Connect one end of the USB cable into the micro USB port On the headset.
  • Step 2: Directly connect the other end into a USB wall outlet; Or connect the other end to a compatible adapter (not included), then plug it into a socket. While Charging: Solid red will be showing up Fully Charged: Red light will disappear

Tips:
Please charge the headset when it’s turned off, It may take around 3 hours to reach a full charge. When the battery of the headset gets low, the LED
Battery” from the headset. Please charge it timely.

FM/MP3 MODE

  • In powered-on mode, click the FM/MP3 button to activate the FM Radio mode;
  • In FM mode, click the multi-function button, it will initiate searching for all radio stations automatically. Please wait 40-50 seconds for all the stations to be memorized. After the search is over, you can change the FM stations with long pressing + and -.
  • Click the FM/MP3 button again, to go back to Bluetooth mode.
  • In power-on mode, will enter SD card mode if insert a micro-SD card.

ABOUT CHARGING

  • Do not turn on the headphones and don’t use Bluetooth while charging.
  • If the headphone is not used for a long time, the rechargeable battery may not be able to retain enough power. After repeated charge and discharge several times, the battery will be able to maintain the appropriate power
  • If you store the unit for an extended period, charge the battery every six months to prevent over-discharge.

HOW TO RESET THE HEADPHONES?

Hold both Buttons for 4-7 seconds to reset the Bluetooth and enter the pairing regime again.

CE
Hereby GL Grup-2015 LTD declares that wireless headphone PowerLocus P1 Kids is in compliance with essential requirements and other relevant conditions of Directive 2014/53/EU. The full text of the EU declaration conformity is available at the following internet address: (powerlocus.com/doc)

  • Frequency: 2402-2480 MHz
  • Max radio frequency power: 100 mW (EIRP)
  • GL GRUP-2015 LTD.
  • 36 VASIL LEVSKI STREET, 5370 DRYANOVO, BULGARIA

Warning : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

NOTE : This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
The device has been evaluated to meet general RF exposure requirements.

ISED Canada Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada‘s license-exempt RSS(s). Operation is subject to the following two conditions: this device may not cause interference and this device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure: This equipment complies with Canadian radiation
Exposure limits are set forth for an uncontrolled environment to maintain compliance with IC’s RF Exposure guidelines. This equipment should be installed and operated with a minimum distance of 0mm from the radiator of your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

UK
To find out more about the UK Declaration of Conformity, please visit: https://powerlocus.com/doc-uk-p1kids
This symbol on a product means that the product is covered by European Directive 2012/19/EU. Electrical products should not be disposed of with household waste. Please recycle them at the collection points provided for this purpose. Contact the local authorities or your dealer for recycling advice. Proper disposal of old appliances helps preserve the environment and health

Safety Instructions

  1. Please charge the headphones before first time using.
  2. Please charge at least once every 3 months to keep battery in good condition.
  3. To protect your hearing, please do not use the headphones long time with too high volume.
  4. Do NOT expose the headphone to not temperature
  5. Protect from shocks and drops
  6. Do NOT try to open the product Do NOT expose to moisture, rain and liquids

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

PowerLocus User Manuals

Related Manuals