PowerLocus EDGE Bluetooth Headphones Over Ear User Manual

June 14, 2024
PowerLocus

PowerLocus EDGE Bluetooth Headphones Over Ear

Email Support: info@powerlocus.com

PRODUCT OVERVIEW

PowerLocus-EDGE-Bluetooth-Headphones-Over-Ear-fig-1

  1. Multi-function button
  2. ”+” button
  3. “-” button
  4. М button/ EQ modes
  5. 3.5mm AUX jack
  6. Bluetooth connection status indicator
  7. Power on/off switch
  8. USB-C port
  9. Microphone
  10. Micro-SD card slot
  • Bluetooth Version: V5.3
  • Working Distance Range : 10M
  • Frequency Range: 20Hz-20kHz
  • Audio Drivers: Φ40mm
  • Charging Voltage: DC 5V
  • Charging  Time:   About 1.5 Hours
  • Talking/Music Time:   About 40 Hours (50% Volume)
  • Impedance: 32 Ohms
  • Weight: 191g/0.42LBs
  • Volume Sensitivity: 100+/-3dB
  • Bluetooth specification Power Class 1
  • Frequency band: 2.402-2.480GHz
  • Operating frequency: 2402-2480MHz
  • Rated power consump-tion: 120 mW
  • Maximum output power: < 7dBm
  • Operating Temperature: 0 °C to 45 °C

POWER ON/OFF

Power on
Switch the On/Off button, then you will hear a voice prompt of “Power On” and “Pairing”. The

Power off

  • Option 1: Switch again the Power Button, The LED Indicator will be off.
  • Option 2: If the headset is not connected with any device within 5 minutes, it will be powered off automatically.

CONNECT WITH A BLUETOOTH DEVICE

WIRELESS CONNECTION CONNECT WITH A MOBILE DEVICE

Step 1
After turning the headset on, wait until you see the LED Indicator flash red and blue alternately, which indicates the headset is ready to be paired to the mobile device.

Step 2
Turn on the Bluetooth on your device, then search and connect to the already- appearing “PowerLocus Edge”.

Step3
There will be a voice prompt and the LED Indicator will be steady blue, the LED light will flash blue slowly if there is a music playing.

Tips:
Please connect the headset to your mobile device within 5 minutes.

DISCONNECT
Go to the Bluetooth list of your mobile device, then select “PowerLocus Edge” and disconnect the headset. You will hear a voice prompt when disconnecting.

WIRED CONNECTION

Step 1
Connect one end of the 3.5mm Audio Cable to the Audio Jack of the headset.

Step 2
Connect the other end to your mobile device.

Tips:
The microphone only works with a wireless connection. When listening to music using the provided 3.5mm audio cable, the volume adjustment and song-switching functions can only be operated by the mobile device.

FUNCTION OVERVIEW

MUSIC

  • Play/pause music: short press“multi-function” button
  • Next song: long press “+” button
  • Previous song: long press “-” button
  • Volume up: short press “+” button
  • Volume down: short press “-” button

Tips
For Android device, if you have adjusted the volume by the headset to the maximum level, but still feels it is too low, please turn up the volume on your mobile device as well. When using the 3.5mm audio cable provided to listen to music, the functions of volume adjustment and song switching can only be operated by the mobile device.

EQ Modes (Bass, Rock, Pop, Vocal Mode)
In powered-on mode, click the M button to switch between the modes – Rock, Bass, Pop and Vocal

CALLS

  • Redial : double-click the multi-function to redial the last call number
  • Answer the call: Click the multi-function button when a call is coming
  • End the call: click the multi-function button to end the call
  • Reject the call: Long press the multi-function button to reject the call

ACTIVATE SIRI/GOOGLE ASSISTANT
Long press the multi-function button to wake up Siri.

CHARGE
Please charge the headset with the USB cable provided before your first use.

Step 1:
Connect one end of the USB cable to the micro USB port On the headset.

Step 2:
Directly connect the other end to a USB wall outlet; Or connect the other end to a compatible adapter (not included), then plug it into a socket. While Charging: Solid red will show up. Fully Charged: The red light will disappear.

Tips:
Please charge the headset when it’s turned off, It may take around 3 hours to reach a full charge. When the battery of the headset gets low, the LED Indicator will flash red and you will hear a voice prompt from the headset. Please charge it timely.

FM/MP3 MODE

  • In powered-on mode, click the M button to activate the FM Radio mode;
  • In FM mode, hold the MFB multi-function button for 3-4 seconds, it will initiate searching for all radio stations automatically. Please wait 40-50 seconds for all the stations to be memorized. After searching is over, you can change the FM stations with long pressing + and – .
  • Click the M button again, to go back to bluetooth mode.

MICRO SD / TF MODE
In power-on mode, please insert a Micro SD card up to 32GB and it will start automatically. To change the mode, simply switch it back by clicking twice the M button.

ABOUT CHARGING

  • Do not turn on the headphones and don’t use bluetooth while charging.
  • If the headphone is not used for a long time, the rechargeable battery may not be able to retain enough power. After repeated charge and discharge several times, the battery will be able to maintain the appropriate power
  • If you store the unit for an extended period, charge the battery every six months to prevent over-discharge.

HOW TO RESET THE HEADPHONES?

  •  Hold both Buttons for 4-7 seconds to reset the bluetooth and enter the pairing regime again.

To find out more about the UK Declaration of Conformity, please visit: https://powerlocus.com/doc-uk-edge

FCC STATEMENT

Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. The device has been evaluated to meet general RF exposure requirements.

ISED Canada Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada ‘s licence-exempt RSS(s). Operation is subject to the following two conditions: this device may not cause interference and this device must accept any interference, including interference that may cause undesired operation of the device. Radiation Exposure: This equipment complies with Canada’s radiation Exposure limits set forth for an uncontrolled environment to maintain compliance with IC’s RF Exposure guidelines. This equipment should be installed and operated with a minimum distance of 0mm from the radiator of your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Hereby GL Grup-2015 LTD declares that wireless headphone PowerLocus EDGE complies with essential requirements and other relevant conditions of Directive 2014/53/EU. The full text of the EU declaration conformity is available at the following internet address (powerlocus.com/doc) Frequency: 2402-2480 MHz Max radio frequency power: 100 mW (EIRP) GL GRUP-2015 LTD. 36 VASIL LEVSKI STREET, 5370 DRYANOVO, BULGARIA

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

PowerLocus User Manuals

Related Manuals