PowerLocus P3 Bluetooth Wireless Headphones User Manual
- May 15, 2024
- PowerLocus
Table of Contents
PowerLocus P3 Bluetooth Wireless Headphones
Product Information
- Specifications
- Rated Power Consumption: 1.48W
- Frequency Band: 2.4000 GHz – 2.4835 GHz
- Operating Frequency: 2.400 MHz – 2.4835 MHz
- Maximum Output Power: [Not specified in the provided text]
- Product Overview
- The PowerLocus P3 is a high-quality headphone designed for optimal performance and comfort.
- With a rated power consumption of 1.48W and operating within the frequency band of 2.4000 GHz to 2.4835 GHz, this headphone delivers excellent audio quality.
- Packing List
- Headphone x1
- Aux Audio Cable x1
- Type-C Charging Line x1
Product Usage Instructions
- Step 1: Charging
- Before using the PowerLocus P3 headphones for the first time, ensure it is fully charged using the provided Type-C charging line.
- Step 2: Pairing with Device
- To pair the headphones with your device, turn on the Bluetooth function on your device and search for “PowerLocus P3” in the available devices list. Select the headphones to establish a connection.
- Step 3: Adjusting Settings
- Once paired, adjust the volume and other settings on both the headphones and your device to customize your audio experience.
- Step 4: Enjoying Music
- Play your favourite music or audio content through the PowerLocus P3 headphones and enjoy the high-quality sound with comfort.
FAQs
- Q: How do I reset the PowerLocus P3 headphone?
- A: To reset the headphones, press and hold the power button for 10 seconds until you see the LED indicators flashing.
- Q: Can I use the PowerLocus P3 for making phone calls?
- A: Yes, you can use the headphone for making phone calls as it features a built-in microphone for clear communication.
PACKING LIST
- Headphone x1
- Aux Audio Cable x 1
- Type -C charging line x1
PRODUCT OVERVIEW
- Power: Power on / Power off
- Short press: Volume Up / Long press: Next song
- Pause /Play/ Answer/hang up the phone
- Bluetooth connected: Double-click to call a recent call
- Short press: Volume Down / Long press: last song
- Aux Audio Port
- LED Light indicator
- USB-C Charging Port
- Microphone
- BT Version: V5.3
- Speaker Size: 40mm
- Speaker impedance: 32±15%
- Speaker sensitivity: 110±3dB
- Frequency Response: 20-20KHz
- Battery talk/music time: about 50
- Battery capacity: 400mAh
- Battery charging time: about 2.5H
- Charging interface: Type-c
- Bluetooth Specification Power Class 2 and 3
- Rated power consumption: 1.48W
- Frequency band 2.4000 GHz – 2.4835 GHz
- Operating frequency: 2 400 MHz – 2 483.5 MHz
- Maximum output power: <10dBm
- Operating Temperature: 0 °C to 45 °C
OPERATING INSTRUCTION
PAIRING
- Long press(1) On/Off button to turn on the headset.
- Open the smart device Bluetooth menu and then Select the Bluetooth name PowerLocus P3
WHEN MUSIC IS PLAYING
- Click: Volume Plus
- Long press: Next song
- Click: Volume down
- Long press: Last song
- Click: Play/Pause
WHEN THE PHONE IS ON HANDS-FREE
- Short press: Answer/hang up the phone
- Double press: Call back
- Long press for 1.5 seconds: Reject the call
HOW TO RESET THE HEADPHONES?
- Hold both Buttons for 4-7 seconds to reset the bluetooth and enter the pairing regime again.
EQ MODE
In powered-on mode, click the Power ON/OFF button to change between the modes – Pop, Bass, Rock and Vocal.
LED LIGHT INTRODUCTION
- Turning ON: The white light appears and Flashes for 2 seconds
- Turning OFF: The green light flashes 2 times and then goes off
- BLUETOOTH CONNECTED: Lights GO OFF and White LED flashes every 20 seconds
- PAIRING REGIME: Green / White lights are flashing alternately
- Disconnected state: Green / White lights are flashing alternately
- Headphones Charging Status: Constant Green Light is ON
- Fully charged headphones: Green light GOES OFF
- Low battery indication: Green light flashing
HOW TO CHARGE THE HEADPHONES?
Please charge the headphones with the USB cable provided before your first use
- Step 1: Connect one side of the USB cable to the USB-C port on the headphone
- Step 2: Directly connect the other side to a USB Wall outlet / Laptop or PC usb port to charge the headphone
Hereby GL Grup-2015 LTD declares that wireless headphone PowerLocus P3 complies with essential requirements and other relevant conditions of Directive 2014/53/EU. The full text of the EU declaration conformity is available at the following internet address: (power-locks.com/doc)
- Frequency: 2402-2480 MHz
- Max radio frequency power: 100 mW (EIRP)
- GL GRUP-2015 LTD.
- 36 VASIL LEVSKI STREET, 5370 DRYANOVO, BULGARIA
- To find out more about the UK Declaration of Conformity, please visit https://powerlocus.com/doc-uk-P3.
Warning:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmfulinterference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used per the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. f
this equipment does cause harmful interference to radio or television
reception which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. The device has been evaluated to meet general RF exposure requirements.
ISED Canada Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada‘s licence-exempt RSS(s).
Operation is subject to the following two conditions:
- this device may not cause interference and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure: This equipment complies with
Canada radiation
Exposure limits are set forth for an uncontrolled environment to maintain
compliance with IC’s RF Exposure guidelines. This equipment should be
installed and operated with a minimum distance of 0mm from the radiator of
your body. This device and its antenna(s) must not be co-located or operated
in conjunction with any other antenna or transmitter. This symbol on a product
means that the product is covered by European Directive 2012/19/EU. Electrical
products should not be disposed of with household waste. Please recycle them
at the collection points provided for this purpose. Contact the local
authorities or your dealer for recycling advice. Proper disposal of old
appliances helps preserve the environment and health
Safety Instructions
- Please charge the headphones before first use.
- Please charge at least once every 3 months to keep the battery in good condition.
- To protect your hearing, please do not use the headphones long time with too high a volume.
- Do NOT expose the headphones to hot temperature
- Protect from shocks and drops
- Do NOT try to open the product
- Do NOT expose to moisture, rain and liquids
Email Support: info@powerlocus.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>