PowerLocus BT8023 Bluetooth Headphones Over Ear User Manual
- June 14, 2024
- PowerLocus
Table of Contents
PowerLocus P4 WIRELESS HEADPHONES
E-Mail: info@powerlocus.com
User Manual
BT8023 Bluetooth Headphones Over Ear
Please read the instructions before using the headset.
ITEMS IN THE BOX
- Bluetooth Headphones
- USB charging cable
- Detachable audio cable
BLUETOOTH HEADPHONES:
1. Quick Press: Volume Up Continuous Hold: Next Song
2. Quick Press: Volume Down Continuous Hold: Previous Song
3. Press: Play /Pause Press: Answer /Hang up| 4. Charging
5. Indicator Light
6. Aux in
7. Mic
---|---
Bluetooth Version: V5.3
Working Distance Range: 10M
Frequency Range: 20Hz-20kHz
Audio Drivers: Φ40mm
Charging Voltage: DC 5V
Charging Time: About 1.5 Hours
Talking/Music Time: About 40 Hours
(50% Volume)
Impedance: 32 Ohms
Weight: 191g/0.42LBs
Volume Sensitivity: 97dB +/-3dB
Bluetooth Specification Power Class 2
Frequency band: 2.402-2.48 GHz
Operating frequency: 2.402-2.48 MHz
Rated power consumption: 20mW*2
Maximum output power: < 4dBm
Operating Temperature: 0 °C to 45 °C
BUTTON ICONS:
-
Power Switch: :
Continuous hold to turn on /off.
Quick press to Play /Pause
Quick press Answer incoming call
Long press to Reject incoming call -
Functions:
Quick press + to volume up.
Quick press – volume down.
Continuous hold + to play the next song.
Continuous hold – to play the previous song. -
How to connect via Bluetooth?:
LED status
Flashing Blue/Red – Pairing mode
Constant Blue – Connected
3.1 Pair with new device
Step 1: Turn on the headphones, they will enter pairing mode automatically.
Step 2: Open the Bluetooth settings on your phone or tablet and click “search device”. Your phone will search for Bluetooth devices automatically.
Step 3: You have found the product when the screen displays “PowerLocus P4+”, Click on it to pair the devices.
Step 4: The phone or tablet will indicate when the pairing is successful. The LED light of the product will change from flashing Blue/Red to constant Blue.
3.2Pair with the previously paired device
Step 1: Turn on the headphones and they will connect automatically to the previously paired device.
Note*** – To connect with different device, make sure that the headphones are disconnected from any device and are in Pairing mode.
CHARGING:
Please make sure the product is fully charged for the first use. Charge the
product with the provided USB cable which is compatible with any computer or
other MAX 5V output charger.
The Bluetooth Indicator will be in red while charging.
When the battery is fully charged it will turn off.
TIPS:
- Charging time: about 2-2.5 hours
- When using for the first time, charging for more than 1-2 hours is mandatory.
- Please charge the product if it has not been used for a long time (more than a month)
- Please keep away from fire and water.
- To prevent possible hearing damage, do not listen at high volume levels for long periods. Do not use the headset while driving or cycling or in a situation where you should be able to hear other sounds. As a guide to setting the volume level, check that you can still hear your own voice, when speaking normally while using the headset.
Warning: This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter.
The device has been evaluated to meet general RF exposure requirement.
ISED Canada Statement:
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada ‘s licence exempt
RSS(s). Operation is subject to the following two conditions: this device may
not cause interference and this device must accept any interference, including
interference that may cause undesired operation of the device.
Radiation Exposure: This equipment complies with Canada radiation
Exposure limits set forth for an uncontrolled environment to maintain
compliance with IC’s RF Exposure guidelines. This equipment should be
installed and operated with minimum distance of Omm the radiator your body.
This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter.
CE:
Hereby GL Grup-2015 LTD declares that wireless headphone PowerLocus P4 is in
compliance with essential requirements and other relevant conditions of
Directive 2014/53/EU. The full text of the EU declaration conformity is
available at the following internet address:
(powerlocus.com/doc)
Frequency: 2402-2480 MHz
Max radio frequency power: 100 mW (EIRP)
GL GRUP-2015 LTD.
36 VASIL LEVSKI STREET, 5370 DRYANOVO, BULGARIA
UK
To find out more baout the UK Declaration of Conformity, piease visit:
https://powerlocus.com/doc-uk-p4
This symbol on a product means that the product is covered by European
Directive 2012/19/EU.
Electrical products should not be disposed of with household waste. Please
recycle them at the collect points provided for this purpose. Contact the
local authorities or your dealer for recycling a advice. Proper disposal of
old appliances helps preserve the environment and health
Safety Instructions
- Please charge the headphones before first time using.
- Please charge at least once every months to keep battery in good condition.
- To protect your hearing, please do not use the headphones long time with too high volume.
- Do NOT expose the headphone to hot temperature
- Protect from shocks and drops
- Do NOT try to open the product
- Do NOT expose to moisture, rain and liquids