RYOBI RWTS18 18V ONE Soap Dispensing Scrubber Instruction Manual
- October 30, 2023
- RYOBI
Table of Contents
RYOBI RWTS18 18V ONE+ Soap Dispensing Scrubber
Product Information
The RWTS18 is a telescopic power scrubber designed for cleaning both exterior and interior surfaces. It is supplied with a 15 cm medium bristle nylon brush and a 15 cm foam head, which are ideal for use on various surfaces such as brick, concrete, glass, barbecue grills, grouting, linoleum flooring, tiling, masonry, outdoor furniture, plastic piping and guttering, cladding, wood, and automotive cleaning. The product can be used with water only and must be used with the solutions listed below to avoid damaging internal components of the product and voiding your warranty:
- RYOBI extreme foam (RPWD1)
The product is designed to be used only by adults who have read and understood the instructions and warnings in the manual and can be considered responsible for their actions. Safety, performance, and dependability have been given top priority in the design of the product.
Product Usage
- Read all safety warnings, instructions, illustrations, and specifications provided with the power tool before using it.
- Ensure that the work area is clean and well-lit to avoid accidents. Do not operate the power tool in explosive atmospheres.
- Keep children and bystanders away from the work area while operating the power tool to avoid distractions that may cause you to lose control.
- Ensure that the power tool plugs match the outlet. Do not modify the plug in any way, and do not use any adapter plugs with earthed power tools.
- Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators to reduce the risk of electric shock.
- Do not expose the power tool to rain or wet conditions, as water entering the product will increase the risk of electric shock.
- Do not abuse the cord. Keep the cord away from heat, oil, sharp edges, or moving parts to prevent damage that may increase the risk of electric shock.
- When operating the power tool outdoors, use an extension cord suitable for outdoor use to reduce the risk of electric shock.
- If operating the power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply to reduce the risk of electric shock.
- Stay alert, watch what you are doing, and use common sense when operating the power tool. Do not use the power tool while you are tired or under the influence of drugs, alcohol, or medication to prevent serious personal injury.
- Attach the desired brush head to the telescopic power scrubber.
- Fill a bucket with water and add the recommended cleaning solution.
- Dip the brush head into the cleaning solution and start scrubbing the surface to be cleaned.
- Adjust the telescopic handle to reach high or hard-to-reach areas.
- Rinse the surface with clean water after cleaning.
IMPORTANT!
It is essential that you read the instructions in this manual before
assembling, operating, and maintaining the product.
Subject to technical modifications.
Safety, performance, and dependability have been given top priority in the
design of your telescopic power scrubber.
INTENDED USE
The telescopic power scrubber is intended to be used only by adults who have
read and understood the instructions and warnings in this manual, and can be
considered responsible for their actions.
The product is intended for cleaning exterior and interior surfaces. It can be
used with water.
The product is supplied with a 15 cm medium bristle nylon brush, ideal for use
on brick, concrete, glass, barbecue grills, grouting, linoleum flooring,
tiling, masonry, outdoor furniture, plastic piping and guttering, cladding and
wood; and a 15 cm foam head ideal for automotive cleaning.
Use only solutions listed below. Do not use other chemicals. They may damage
internal components of the product and void your warranty.
Do not use the product in any way other than those stated for intended use.
SAFETY WARNINGS
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings, instructions, illustrations and
specifications provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.
The term “power tool’’ in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
- Keep work area clean and well lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
- Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
- Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
- When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
- If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
PERSONAL SAFETY
- Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
- Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
- Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
- Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
- Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
- Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
- If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
- Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
- Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
- Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with switch is dangerous and must be repaired.
- Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
- Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
- Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
- Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
- Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
- Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
- Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
- When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
- Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
- Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
- Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.
SERVICE
- Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
- Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorised service providers.
SCRUBBER SAFETY WARNINGS
CAUTION! The product must not be used on a drinking water supply without
a backflow preventer being installed that corresponds to EN 12729 Type BA.
Water flowing through a backflow preventer is not considered drinkable. Do not
connect the product to the public drinking water network.
- Always close the battery cover and lock it in place before use. Do not expose the battery pack to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Inspect the hoses for damages and leaks before use. Have damaged hoses repaired or replaced.
- Remove the battery pack from the product after use and before carrying out user maintenance.
- Ambient temperature range for tool during operation is between 0°C and 40°C.
- Ambient temperature range for tool storage is between 0°C and 40°C.
- The recommended ambient temperature range for the charging system during charging is between 10°C and 38°C.
ADDITIONAL SAFETY WARNINGS
- The product can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. The product shall not be left unattended while it is connected to the battery pack.
- Children shall not play with the product. Cleaning and user maintenance shall not be made by children without supervision.
- The product will shut down if overloaded. Press the on/off switch and wait 30 seconds before restarting.
- Do not direct the liquid from the product towards equipment containing electrical components.
- Do not use the product if it has been dropped, if there are visible signs of damage, or if it is leaking.
- Do not use non-rechargeable batteries.
- Rechargeable batteries are to be removed from the product before being charged.
- Exhausted batteries are to be removed from the product and safely disposed of.
- If the product is to be stored unused for a long period, remove the battery.
- The supply terminals are not to be short-circuited
- Do not expose the product or battery to excessive temperatures.
- Be aware of the risk of terminals of the product or battery being short-circuited by metal objects.
- Do not use non-rechargeable batteries in place of rechargeable batteries.
- Do not use modified or damaged batteries.
ADDITIONAL BATTERY SAFETY WARNINGS
- To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.
- Ambient temperature range for battery during use is between 0°C and 40°C.
- Ambient temperature range for battery storage is between 0°C and 20°C.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national provisions and
regulations.
Follow all special requirements on packaging and labelling when transporting
batteries by a third party. Ensure that no batteries can come in contact with
other batteries or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or tape. Do not
transport batteries that are cracked or leaking. Check with the forwarding
company for further advice.
MAINTENANCE
- The product should never be connected to a power supply when assembling parts, making adjustments, cleaning, performing maintenance, or when the product is not in use. Disconnecting the product from the power supply will prevent accidental starting that could cause serious injury.
- When servicing, use only original manufacturer’s replacement parts, accessories and attachments. Use of any other parts may create a hazard or cause product damage.
- Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
- Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.
- For greater safety and reliability, all repairs should be performed by an authorised service centre.
SYMBOLS ON THE PRODUCT
Do
not dispose of waste batteries, waste electrical and electronic equipment as
unsorted municipal waste. Waste batteries and waste electrical and electronic
equipment must be collected separately. Waste batteries, waste accumulators,
and light sources have to be removed from the equipment. Check with your local
authority or retailer for recycling advice and collection point. According to
local regulations, retailers may have an obligation to take back waste
batteries and waste electrical and electronic equipment free of charge. Your
contribution to the reuse and recycling of waste batteries and waste
electrical and electronic equipment helps to reduce the demand of raw
materials. Waste batteries, in particular containing lithium, and waste
electrical and electronic equipment contain valuable and recyclable materials,
which can adversely impact the environment and the human health if not
disposed of in an environmentally compatible manner. Delete personal data from
waste equipment, if any.
SYMBOLS IN THIS MANUAL
PARTS
ASSEMBLY
PRODUCT SPECIFICATIONS
BATTERY
Compatible battery pack (not included)
- RB18L13
- RB18L15
- RB18L15A
- RB18L15B
- RB18L20
- RB18L20A
- RB18L25
- RB18L25A
- RB18L40
- RB18L40A
- RB18L50
- RB18L50A
- RB18L60A
- RB18L90A
- RB1815C
- RB1820C
- RB1825C
- RB1840C
- RB1840X
- RB1850C
- RB1850X
- RB1860X
WARNING! The declared vibration total values and the declared noise
emission values given in this instruction manual have been measured in
accordance with a standardised test and may be used to compare one tool with
another. They may be used for a preliminary assessment of exposure.
The declared vibration and noise emission values represent the main
applications of the tool. However, if the tool is used for different
applications, used with different accessories, or poorly maintained, the
vibration and noise emission may differ. These conditions may significantly
increase the exposure levels over the total working period.
An estimation of the level of exposure to vibration and noise should take into
account the times when the tool is turned off or when it is running idle.
These conditions may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from the effects
of vibration and noise, such as maintaining the tool and the accessories,
keeping the hands warm (in case of vibration), and organising work patterns.
Imported by:
Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC
3149 Melbourne, Australia
Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South,
Highbrook, Auckland 2013, New Zealand