PowerLocus P6 Wireless Over Ear Headphones User Manual

: June 4, 2024
: PowerLocus

Table of Contents

Product indication
Power on/off the headset
Pair to your mobile phone or other products
MP3/FM
answer/end calls reject a call, last number redial(In the Bluetooth mode)
Charging the headset
Wired headphone function
Precautions
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

P6 Wireless Over Ear Headphones
User Manual

Product indication

PowerLocus P6 Wireless Over Ear Headphones

****Power on /off
play/pause,answer/end calls,reject call,last number redial
+ Volume up(Long Press)/Next song(Short Press)
M Volume down(Long Press)/Last song(Short Press)
Multi-function button(pairing,auto search radio)
Headset jack
LED indicator
Micro USB charging port
Microphone10- Micro SD/TF card slot

Power on/off the headset

Power on Slide the switch right and the blue and red indicator light will flash(the headset said: the wireless is ready to pair ).
Power off Slide the switch left and the blue indicator light will go off.

Pair to your mobile phone or other products

Slide the switch right and the blue and red indicator light will flash(the headset said: the wireless is ready to pair ).
Turn on the Bluetooth function of your phone or other products.
Search for the Bluetooth devices and select’s-812’.(Enter the code ‘0000’ if needed)
If the pairing is successful, the blue light indicator starts flashing(the headset said: the wireless is connected successfully).
Please make sure the headphone is working before pairing.
It will connect to the pre-set phone automatically when turns on(Please make sure the Bluetooth function of your phone is working)
If the pairing is not successful, please switch off the headset first, and then re-pair again.

MP3/FM

In power-on mode, insert the TF card, short press the M button, and MP3 will play automatically.
If have not a TF card, short press the M button, and the FM radio will play automatically.
In power-on mode, short press the button, and FM radio will play automatically.Long press the button to auto search all radio stations, wait for a moment,then short press + or, – you will listen to any radio station you like.
If you are listening to FM radio, a short press the M button, and it will be converted to Bluetooth mode. And auto-connected to your phone or other products.

answer/end calls reject a call, last number redial(In the Bluetooth mode)

When there is a call, a short press button can answer the call. After the call, press the button can hang up. If the other side hangs up, no need to press the button.
reject call: long press button about 2-3seconds
the last number redial: press fast button 2 times
When the phone calls out or answers the call, if the Bluetooth headphone is playing the music, the music will pause automatically and enter the waiting state.After hanging up, the music will continue to play automatically.

Charging the headset

Insert a USB charging cable into a USB port which have support 5V power (such as AC/DC USB adapter or PC USB port). When the red light is on, the headset is in charge. When the red light will be off, the headset is fully charged. It takes about 2-2.5 hours to charge the headset fully.
The battery is rechargeable. Low-Voltage alert: When the alert tone ‘low battery’ sounds and the indicator turns into red indicates that the battery has run out, and needs to be charged as soon as possible.First-time charging: please be sure the battery has been charged fully before use.

Wired headphone function

For any mode of headphones, you can connect one side of the 3.5 stereo sound supply extension line to the headphone audio jack, another side connects to the Audio jack(such as mobile phones, computers, Ipad, etc). Then you will hear songs from other devices.

Precautions

Please be gentle when using headphones. The Maximum tolerance of the button is 250g. Excessive force or being stroked by something will damage buttons.
Please do align the USB port when plugging or pulling the USB cable in case that damages the USB cable and fails to charge the headphone.
When encountering something similar to interference. please first delete the Bluetooth devices that connected with headphones before, then restart your phone, at last, please repair the Bluetooth headphone.
If long time without using a headset, it is recommended to turn off the headset, in case that the battery is in a low voltage state, causing charging problems.
Please don’t put the headset in a hot temperature area.
Please don’t vibrate or shock the headset violently, and do not let it fall down from a high place.
If there is no response from the headset, Pls insert the headphone plug hole to reset by the tool.

Facebook: @PowerLocus
Email:powerdirect155@gmail.com
Whatsapp: +31 633242189
US Phone Support:646-844-2665
UK Phone Support: +44 203608580