PowerLocus P2 Bluetooth Headphones for Kids with Volume Limit 85DB User Manual

PowerLocus P2 Bluetooth Headphones for Kids with Volume Limit 85DB

Product indication

1. Power on /off
2.  play/pause,answer/end calls,reject call,last number redial
3. Volume up(Short Press)/Next song(Long Press)
4. Volume down(Short Press)/Last song(Long Press)
5. M Multi-function button(pairing.auto search radio)
6. Headset jack
7. LED indicator
8. Micro USB charging port
9. Microphone
10. Micro SD/TF card slot

Power on/off the headset

1. Power on: Slide the switch right and the blue and red indicator light will flash(the headset said: the wireless is ready to pair)
2. Power off Slide the switch left and the blue indicator light will go off.

Pair to your mobile phone or other products

• Slide the switch right and the blue and red indicator light will îiash(the headset said:the wireless is ready to pair ).
• Tun on the Bluetooth function of your phone or other products.
• Search for the Bluetooth devices and select” PowerLocus P2″(Enter the code 0000′ if needed)
• If paring is successfiul, the blue light indicator starts flashing(the headset said:the wireless is connected successfully).
• Please make sure the headphone is working before pairing
• It will connect to the pre-set phone automatically when turns on(Please make sure the Bluetooth function of your phone is working)
• If the pairing is not successful, please switch off the headset firstly, and then re-pair again.

MP3/FM

1. In power-on mode, insert the TFcard, short press the M button, and MP3 will play automatically.
2. I have no TF card, short press the M button, and FM radio will play automatically.
3. In power-on mode, short press the M button, and the FM radio will play automatically.
4. Long press the Play/Pause button il/C to auto search all radio stations, (3) wait for 4Osec to Imin for the stations to be memorized, (4) then long-press or, you will listen to any radio station you like.
5. If you are listening to FM radio, short press the M button, it will be converted to the Bluetooth mode And auto connected to your phone or other products.

Siri/Google assistant, answer/end calls, reject call last number redial(In the Bluetooth mode)

1. When there is a call, a short press of the I/C button can answer the call. After the call. press button can hang up. If the other side hangs up, no need to press the button.
2. Reject call: long press  button about 2-3seconds
3. Last number redial: press fast button 2 times
4. When the phone calls out or answers the call. if the Bluetooth headphone areplaying the music, the music will pause automatically and enter the waiting state.After hang up, the music will continue to play automatically.
5. Activate the Siri/Google Assistant:long press the button for about 3-5 seconds

Charging the headset

• Insert a USB charging cable into a USB port which have support 5V power (such as an ACIDC USB adapter or PC USB port). When the red light is on, the headset is in charge. When the red light will be off, the headset is fully charged. It takes about 2-2.5 hours to charge the headset fully.
• The battery is rechargeable. Low-Voltage alert: When the alert tone low battery’ sounds and the indicator turns red indicate that the battery has run out, needs to be charged as soon as possible.First time charging: please be sure the battery has been charged fully before use.
• Wired headphone function For any mode of headphones, you can connect one side of the 3.5 stereo sound supply extension line to the headphone audio jack, another side connects to Audi0 Jack{such as mobile phones, computers, Ipad, etc).1hen you will hear songs from other devices.

Precautions

1. Please be gentle when using headphones. The maximum tolerance of the button is 250g. Excessive force or being stroked by something all will damage buttons.
2. Please do align the USB port when plugging or pulling the USB cable in case that damages the USB cable fails to charge the headphone
3. When encountering something similar to interference. please first delete the Bluetooth devices that connected with headphones before, then restart your phone, at last, please repair the Bluetooth headphone.
4. If long time without using a headset, it is recommended to turn off the headset, in case the battery iS in a low voltage state, causing the charging problems.
5. Please don’t put the headset in a hot temperature area.
6. Please don’t vibrate or shock the headset violently, and do not let it fall down from a high place
7. If there is no response from the headset, Please inset the headphone plug hole to reset by the tool.

FCC STATEMENT

Federal Communications Commission (FCC) Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide Reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by GL Grup-2015 Ltd may void the FCC authorization to operate this device.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

RF exposure statement

The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. The installation and use of this product are not restricted.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>