TE connectivity Axicom IM Relay Installation Guide

connectivity Axicom IM Relay
Installation Guide

Axicom IM Relay

AXICOM IM RELAY
SIGNAL RELAYS

INTRODUCTION

TE Connectivity (TE)’s Axicom IM signal relays, as part of our smallest types of electromechanical relays, offer a wide and deep range of variations suitable for many applications.
The IM series are equipped with 2 changeover contacts in both monostable or biostable versions, available in multiple coil solutions, performance types and pin layouts.

FEATURES

• Slim line 10x6mm, low profile 5.65mm and min. board-space 60mm².
• Switching current 2/5A, switching power 60W/62.5VA and switching voltage 220VDC/250VAC.
• Low coil power consumption, 140mW standard, 100mW for high sensitive version, 50mW for ultra high sensitive version and 100mW for biostable version.
• High dielectric and surge capability up to 2500Vrms between open contacts and 2500Vrms between coil and contacts.
• High mechanical shock resistance up to 50g functional.

APPLICATIONS

• Telecommunication
• Access and transmission equipment
• Optical network terminals
• Modems
• Office and business equipment
• Consumer electronics
• Measurement and test equipment
• Industrial control
• Medical equipment
• HVAC

APPROVALS

• UL 61810-1 (former UL 508) File No. E214025
  Technical data of approved types on request
  Buyer entirely assumes the risk and all liability relating to (a) assessing the suitability for Buyer’s intended use of the Products and of any system design or drawing and (b) determining the compliance of Buyer’s use of the Products with  applicable laws, regulations, codes and standards. For more info on the exclusive and applicable warranty, please refer to TE standard warranty terms.

CONTACT DATA

Performance type|

Standard, C
(Standard and high  dielectric version)

|

D, I
(High current version)

|

P
(High contact
stability version)

---|---|---|---
Contact arrangement| 2 form C, 2 CO
Max. switching voltage| 220VDC, 250VAC| 220VDC, 250VAC| 220VDC, 250VAC
Rated current| 2A| 5A1)| 2A
Limiting continuous current| 2A| 5A1)| 2A
Switching power| 60W, 62.5VA
Contact material| PdRu +Au covered| AgNi +Au covered| PdRu +Au covered
Contact style| Twin contacts| Twin contacts I: single contacts| Twin contacts
Minimum switching voltage| 100μV
Initial contact resistance| <50mW at 10mA/30mV I: < 100mW
Thermoelectric potential| <10μV
Operate time| typ. 1ms, max. 3ms

Release time

Electrical endurance

UL contact rating

| 30VDC, 2A, 60W, NO only
110VDC, 0.3A, 33W
220VDC, 0.27A, 60W
125VAC, 0.5A, 62.5VA
250VAC, 0.25A, 62.5VA
30VAC, 2A, 62.5VA, NO
only (IMxxI, IMxxD)
---|---
Mechanical endurance| min. 1×108 operations

MAX. DC LOAD BREAKING CAPACITY

COIL DATA

Coil versions, standard version, monostable, 1 coil
00| 1.5| 1.13| 0.15| 16| 140
08| 2.4| 1.80| 0.24| 41| 140
01| 3| 2.25| 0.30| 64| 140
02| 4.5| 3.38| 0.45| 145| 140
03| 5| 3.75| 0.50| 178| 140
04| 6| 4.50| 0.60| 257| 140
05| 9| 6.75| 0.90| 579| 140
06| 12| 9.00| 1.20| 1029| 140
07| 24| 18.00| 2.40| 2880| 200
Coil versions, sensitive version, monostable, 1 coil
11| 3| 2.40| 0.30| 91| 100
12| 4.5| 3.60| 0.45| 194| 100
13| 5| 4.00| 0.50| 234| 100
16| 12| 9.60| 1.20| 1315| 110
17| 24| 19.20| 2.40| 4120| 140
Coil versions, ultra high sensitive version, monostable, 1 coil
21| 3| 3.00| 0.30| 180| 50
22| 4.5| 4.50| 0.45| 405| 50
23| 5| 5.00| 0.50| 500| 50
26| 12| 12.00| 1.20| 2880| 50

All figures are given for coil without pre-energization, at ambient temperature +23°C

Coil code| Rated voltage VDC| Set voltage VDC| Reset voltage VDC|

Coil resistance
W ±10%

| Rated coil power mW
---|---|---|---|---|---
Coil versions, standard version, biostable 1 coil
40| 1.5| 1.13| -1.13| 23| 100
48| 2.4| 1.80| -1.80| 58| 100
41| 3| 2.25| -2.25| 90| 100
42| 4.5| 3.38| -3.38| 203| 100
43| 5| 3.75| -3.75| 250| 100
44| 6| 4.50| -4.50| 360| 100
45| 9| 6.75| -6.75| 810| 100
46| 12| 9.00| -9.00| 1440| 100
47| 24| 18.00| -18.00| 2880| 200

COIL OPERATING RANGE, STANDARD VERSION, MONOSTABLE, 1 COIL
COIL OPERATING RANGE, SENSITIVE AND ULTRA HIGH SENSITIVE VERSION, MONOSTABLE, 1 COIL
COIL OPERATING RANGE, STANDARD VERSION, BISTABLE, 1 COIL

INSULATION DATA

Performance type

|

Standard (Standard, sensitive,  ultra high sensitive version)

|

C 2)
(High dielectric version) a

|

D, P, I
(High current, high contact
stability version)

---|---|---|---
Initial dielectric strength| between open contacts| 750Vrms| 1500Vrms| 750Vrms
---|---|---|---
between contact and coil| 1800Vrms| 1800Vrms| 1500Vrms
between adjacent contacts| 1000Vrms| 1800Vrms| 750Vrms
Initial surge withstand voltage| between open contacts| 1500V| 2500V| 1000V
---|---|---|---
between contact and coil| 2500V| 2500V| 2000V
between adjacent contacts| 1500V| 2500V| 1000V
Initial insulation resistance| between insulated elements| >10⁹W| >10⁹W| >10⁹W
---|---|---|---
Capacitance| between open contacts| max. 1pF
---|---
between contact and coil| max. 2pF
between adjacent contacts| max. 2pF

2. this relay contains SF6 (Sulfur hexafluoride, CAS number: 2551-62-4) for dielectric strength enhancement, SF6 is hermetically sealed in relay without leaks to air during normal application as recommended per the applicable product  specification. It is clarified that the usage of SF6 in mini signal relay is not prohibited by related regulations. Please contact TE local sales or field engineer for further information and detailed material declaration. To ensure the dielectric performance after soldering processes / assembly customer is advised to perform a dielectric test.

RF DATA

OTHER DATA

Material compliance| EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter
---|---
Ambient temperature| -40°C to +85°C
Thermal resistance| <150K/W
Category of environmental protection IEC 61810| RT V – hermetically sealed
Vibration resistance (functional)| 20g, 10 to 500Hz
Shock resistance (functional), half sinus 11ms| 50g
Shock resistance (destructive), half sinus 0.5ms| 500g
Mounting position| any
Weight| max. 0.75g
Resistance to soldering heat SMT IEC 60068-2-58| Moisture sensitive level, JEDEC J-STD-020F MSL3 related only to SMT relays packed in orginaldry-packs. Calculated shelf life in sealed bag: 36 months at <400C and <90% relative humidity (RH). Floor life (out of the bag) at assembly site is 168 Hours at £ 300C/60% RH.
Ultrasonic cleaning| not recommended
Packaging/unit
THT version| tube/50pcs., box/1000 pcs.
SMT version| reel/1000 pcs., box/1000 or 5000 pcs.
Avoid using the relays under strong magnetic fields, as electrical parameters will be affected, such as operate/set __ voltage and release/reset voltage.

MONOSTABLE VERSION REST CONDITION

BISTABLE VERSION, 1 COIL RESET CONDITION
Contacts are shown in reset condition.
Contact position might change during transportation and must be reset before use.

DIMENSIONS (UNIT: mm)

PCB LAYOUT
Top view on component side of PCB

Note:
Customer needs to apply enough solder paste volume / thickness / solder material content to ensure a stable solder joint

PROCESSING
Recommended soldering conditions

PACKING
Tube for THT version

Note:
The author thanks the International Electrotechnical Commission (IEC) for permission to reproduce Information from its International Standards. All such extracts are copyright of IEC, Geneva, Switzerland. All rights reserved. Further  information on the IEC is available from www.iec.ch. IEC has no responsibility for the placement and context in which the extracts and contents are reproduced by the author, nor is IEC in any way responsible for the other content or accuracy therein.”

PRODUCT CODE STRUCTURE

PRODUCT SELECTION INFORMATION

Product code| Arrangement| Perf. type| Coil| Coil type| Coil| Terminals| Part number
---|---|---|---|---|---|---|---
IM00GR| 2 form C,

2 CO

contacts

| Standard| 1.5VDC| Monostable| Standard| SMT gull wing| 3-1462037-7
IM00JR| SMT J-leg| 3-1462037-9
IM00NS| THT narrow| 1-1462038-0
IM01GR| 3VDC| SMT gull wing| 1462037-1
IM01SR| SMT short gull wing| 2-1462040-3
IM01JR| SMT J-leg| 4-1462037-0
IM01NS| THT narrow| 1-1462038-1
IM01TS| THT standard| 1462037-4
IM02GR| 4.5VDC| SMT gull wing| 1462037-9
IM02SR| SMT short gull wing| 2-1462040-4
IM02JR| SMT J-leg| 1-1462037-1
IM02NS| THT narrow| 1-1462038-2
Product code| Arrangement| Perf. type| Coil| Coil type| Coil| Terminals| Part number
---|---|---|---|---|---|---|---
IM03GR| 2 form C, 2 CO contacts| Standard| 5VDC| Monostable| Standard| SMT gull wing| 1-1462037-4
IM03SR| SMT short gull wing| 2-1462040-5
IM03JR| SMT J-leg| 1-1462037-6
IM03NS| THT narrow| 1-1462038-3
IM03TS| THT standard| 1-1462037-8
IM04GR| 6VDC| SMT gull wing| 4-1462037-2
IM04JR| SMT J-leg| 4-1462037-4
IM04NS| THT narrow| 1-1462038-4
IM05GR| 9VDC| SMT gull wing| 3-1462037-4
IM05SR| SMT short gull wing| 2-1462040-6
IM05JR| SMT J-leg| 4-1462037-5
IM05NS| THT narrow| 1-1462038-5
IM05TS| THT standard| 2-1462037-2
IM06GR| 12VDC| SMT gull wing| 2-1462037-3
IM06SR| SMT short gull wing| 2-1462040-7
IM06JR| SMT J-leg| 4-1462037-6
IM06NS| THT narrow| 1-1462038-6
IM07GR| 24VDC| SMT gull wing| 4-1462037-7
IM07SR| SMT short gull wing| 2-1462040-8
IM07JR| SMT J-leg| 4-1462037-8
IM07NS| THT narrow| 1-1462038-7
IM08GR| 2.4VDC| SMT gull wing| 6-1462039-3
IM11GR| 3VDC| High sense| 9-1462038-5
IM12GR| 4.5VDC| 1462039-3
IM13GR| 5VDC| 1462039-4
IM16GR| 12VDC| 1462039-5
IM17GR| 24VDC| 1462039-6
IM17TS| THT standard| 4-1462039-6
IM21GR| 3VDC| Ultra high sensitive| SMT gull wing| 2-1462039-6
IM21TS| THT standard| 1-1462039-5
IM22GR| 4.5VDC| SMT gull wing| 2-1462039-7
IM22TS| THT standard| 2-1462039-8
IM23GR| 5VDC| SMT gull wing| 2-1462039-9
IM23TS| THT standard| 3-1462039-0
IM23KS| THT short| 6-1462039-7
IM26GR| 12VDC| SMT gull wing| 3-1462039-1
IM26TS| THT standard| 3-1462039-2
Product code| Arrangement| Perf. type| Coil| Coil type| Coil| Terminals| Part number
---|---|---|---|---|---|---|---
3) IM40GR| 2 form C, 2 CO contacts| Standard| 1.5VDC| Bastable| Standard| SMT gull wing| 5-1462037-1
3) IM40SR| SMT short gull wing| 2-1462040-9
3) IM40JR| SMT J-leg| 5-1462037-2
3) IM40NS| THT narrow| 1-1462038-8
3) IM40TS| THT standard| 5-1462037-0
3) IM41GR| 3VDC| SMT gull wing| 5-1462037-4
3) IM41SR| SMT short gull wing| 2-1462040-0
3) IM41JR| SMT J-leg SMT| 5-1462037-5
3) IM41NS| THT narrow| 1-1462038-9
3) IM41TS| THT standard| 5-1462037-3
3) IM42GR| 4.5VDC| SMT gull wing| 3-1462037-1
3) IM42SR| SMT short gull wing| 3-1462040-1
3) IM42JR| SMT J-leg| 5-1462037-7
3) IM42NS| THT narrow| 2-1462038-0
3) IM42TS| THT standard| 5-1462037-6
3) IM43GR| 5VDC| SMT gull wing| 5-1462037-9
3) IM43SR| SMT short gull wing| 3-1462040-2
3) IM43JR| SMT J-leg| 6-1462037-0
3) IM43NS| THT narrow| 2-1462038-1
3) IM43TS| THT standard| 5-1462037-8
3) IM44GR|

6VDC

| SMT gull wing| 6-1462037-2
3) IM44SR| SMT short gull wing| 3-1462040-3
3) IM44JR| SMT J-leg| 6-1462037-3
3) IM44NS| THT narrow| 2-1462038-2
3) IM44TS| THT standard| 6-1462037-1
3) IM45GR| 9VDC| SMT gull wing| 6-1462037-4
3) IM45SR| SMT short gull wing| 3-1462040-4
3) IM45JR| SMT J-leg| 6-1462037-5
3) IM45NS| THT narrow| 2-1462038-3
3) IM46GR| 12VDC| SMT gull wing| 6-1462037-7
IM46SR| SMT short gull wing| 3-1462040-5
3) IM46JR| SMT J-leg| 6-1462037-8
3) IM46NS| THT narrow| 2-1462038-4
3) IM46TS| THT standard| 6-1462037-6
IM47GR| 24VDC| SMT gull wing| 7-1462037-0
IM47JR| SMT J-leg| 7-1462037-1
IM47NS| THT narrow| 2-1462038-5
IM47TS| THT standard| 6-1462037-9
3) IM48GR| 2.4VDC| SMT gull wing| 1462039-8
3) IM48SR| SMT short gull wing| 3-1462040-6
Product code| Arrangement| Perf. type| Coil| Coil type| Coil| Terminals| Part number
---|---|---|---|---|---|---|---
IM01CGR| 2 form C, 2 CO contacts| High dielectric| 3VDC| Monostable| Standard| SMT gull wing| 1462038-4
IM01CTS| THT standard| 9-1462038-6
IM02CGR| 4.5VDC| SMT gull wing| 1462038-1
IM03CGR| 5VDC| 1462038-2
IM03CJR| SMT J-leg| 4-1462039-8
IM03CTS| THT standard| 4-1462039-7
IM05CGR| 9VDC| SMT gull wing| 1462038-3
IM06CGR| 12VDC| 9-1462037-9
IM06CJR| SMT J-leg| 3-1462039-4
IM06CTS| THT standard| 4-1462037-9
IM07CGR| 24VDC| SMT gull wing| 1462039-2
IM07CTS| THT standard| 1462039-1
IM17CGR| High sense| SMT gull wing| 1462039-7
3) IM41CGR| 3VDC| Bastable| Standard| 4-1462039-2
3) IM42CGR| 4.5VDC| 4-1462039-1
3) IM43CGR| 5VDC| 9-1462038-7
3) IM48CGR| 2.4VDC| 9-1462039-0
IM02DGR| | High current| 4.5VDC| Monostable| Standard| SMT gull wing| 9-1462038-8
IM02IJR| | SMT J-leg| 1462047-8
IM02IGR| | SMT gull wing| 1462047-9
IM03DGR| 5VDC| SMT gull wing| 9-1462038-9
IM03DJR| | SMT J-leg| 3-1462039-3
IM05DGR| 9VDC| SMT gull wing| 1-1462039-7
IM06DGR| 12VDC| 1-1462039-8
IM06DJR| | SMT J-leg| 7-1462039-0
IM06DTS| | THT standard| 3-1462039-8
IM07DGR| 24VDC| SMT gull wing| 3-1462039-7
IM07DJR| | SMT J-leg| 7-1462039-4
IM07DTS| | THT standard| 7-1462039-2
IM22DTS| 4.5VDC| U.h.sens.| 7-1462039-6
IM41DGR| 3VDC| Bastable| Standard| SMT gull wing| 6-1462039-8
IM42DGR| 4.5VDC| 1-1462039-9
IM42DNS| | THT narrow| 1-1462039-6
IM46DNS| 12VDC| 1-1462039-2
IM47DJR| 24VDC| SMT J-leg| 7-1462039-5
IM48DGR| 2.4VDC| SMT gull wing| 1462039-9
IM49DGR| 2VDC| 2-1462039-2
IM40IGR| 1.5VDC| 1462047-7
IM48IGR| 2.4VDC| 1462047-1
IM49IGR| 2VDC| 1462047-4
Product code| Arrangement| Perf. type| Coil| Coil type| Coil| Terminals| Part number
---|---|---|---|---|---|---|---
IM02PGR| | High contact stability| 4.5VDC| Monostable| Standard| | 5-1462039-4
IM02PNS| THT narrow| 5-1462039-8
IM03PGR| 5VDC| SMT gull wing| 5-1462039-5
IM03PJR| SMT J-leg| 6-1462039-6
IM03PNS| THT narrow| 5-1462039-9
IM06PGR| 12VDC| SMT gull wing| 5-1462039-6
IM06PNS| THT narrow| 6-1462039-0
IM42PGR| 4.5VDC| Bastable| SMT gull wing| 5-1462039-7
IM42PNS| THT narrow| 7-1462039-8
IM43PGR| SMT gull wing| 7-1462039-3
IM46PNS| 12VDC| THT narrow| 6-1462039-1

3. Type VDE certified, for more information contact TE
   Note:
   This list represents the most common types and does not show all variants covered by this datasheet. Other types on request.

Notes:

1. Datasheets and product specification according to IEC 61810-1 and to be used only together with the ‘Definitions’ section.
2. Datasheets and product data is subject to the terms of the disclaimer and all chapters of the ‘Definitions’ section, available at http://relays.te.com/definitions.
3. Datasheets, product data, ‘Definitions’ section, application notes and all specifications are subject to change.

te.com
©2023 TE Connectivity Ltd. Family of Companies. All Rights Reserved.
Axicom, TE Connectivity, TE connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners.
While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is  accurate, correct, reliable or current. TE reserves the right to make any changes to the information contained herein without prior notice. TE Connectivity assumes only those obligations set forth in the terms and conditions for this  product and shall in no event be liable for any incidental, indirect, or consequential damages arising out of the sale, resale, use, or misapplication of the product. TE expressly disclaims any implied warranties with respect to the  information contained herein, including, but not limited to, implied warranties of merchantability or fitness for a particular purpose. Dimensions, specifications and/or information contained herein are for reference purposes only and  are subject to change without notice. Consult TE for the latest dimensions, specifications and/or information. Users of TE Connectivity products must make their own assessment as to whether the respective product is suitable for the respective desired application.

INDUSTRIAL / AXICOM IM RELAY
Downloaded from Arrow.com.

References

• Contact Us - TE Connectivity | TE Connectivity
• Homepage

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>