expert4house 30091 SS-B WiFi and RF Smart AC Switch User Manual

expert4house 30091 SS-B WiFi and RF Smart AC Switch

Product Information

Specifications

• Model No.: 30091 SS-B(WT)
• Input and Output:
  • Input voltage: AC100-240V
  • Output voltage: AC100-240V
  • Output current: Max 1.5A
  • Output power: 150-360W
  • Input signal: Tuya APP + RF + Push switch
  • RF Control distance: 30m (Barrier-free space)
• Environment:
  • Operation temperature: -30°C ~ +55°C
  • Case temperature (Max.): +85°C
  • IP rating: IP20
• Safety and EMC:
  • EMC standard (EMC): ETSI EN 301 489-1 V2.2.3
  • Safety standard (LVD): ETSI EN 301 489-17 V3.2.4
  • Radio Equipment (RED) Certification: EN 62368-1:2020+A11:2020
  • ETSI EN 300 328 V2.2.2 CE, EMC, LVD, RED
• Warranty: 5 years
• Weight:
  • Net weight: 0.041kg
  • Gross weight: 0.051kg

Product Usage Instructions

Mechanical Structures and Installations
The WiFi & RF Smart AC Switch (Model No.: 30091 SS-B(WT)) can be installed in a standard wall junction box behind a push switch. The dimensions of the switch are:

• Width: 52.00 mm
• Height: 26.00 mm

Wiring Diagram
The wiring diagram for the Smart AC Switch is as follows:

Tuya APP Network Connection and Operation

To connect the Smart AC Switch to the Tuya APP:

1. Press and hold the Match/Set key for 2 seconds, or push the Match/Set key twice quickly to clear the previous network connection and enter Smart config mode. The blue LED indicator will flash quickly.
2. If the smart config mode fails, try AP config mode by pressing and holding the Match/Set key for 5 seconds to clear the previous network connection and enter AP config mode. The blue LED indicator will flash slowly.
3. If the Tuya APP network connection is successful, the blue LED indicator will stop flashing. In the Tuya APP, you will be able to find the SWITCH device.

FAQ

1. What is the maximum load that the Smart AC Switch can handle?
   The Smart AC Switch can handle a maximum load of 1.5A.

2. Can the Smart AC Switch be used with dimmable LED lights?
   No, the Smart AC Switch does not have a dimming function and is only compatible with non-dimmable LED lamps, traditional incandescent lights, and halogen lights.

3. How far is the RF control distance?
   The RF control distance is 30m in a barrier-free space.

WiFi & RF Smart AC Switch

• Model No.: 30091 SS-B(WT)

Tuya APP cloud control/Voice control/RF AC Switch/Push on/off/Wall junction box mounting

Features

• WiFi + RF + AC push smart switch, without dimming function.
• To switch single-colour LED lamps, traditional incandescent and halogen lights.
• Tuya APP cloud control, support on/off, delay turn on/off light and timer run function.
• Voice control, support Amazon ECHO and TmallGenie smart speaker.
• Compatibility with RF 2.4G dimming remote control.
• Each SS-B(WT) controller can also work as a WiFi-RF converter, and then use the Tuya APP to control one or more RF switches or controllers synchronously.
• Connect with external push switch optional.
• Easy to be placed in a standard wall junction box behind a push switch.
• Over-heat/Over-load protection, recover automatically.

Technical Parameters

Mechanical Structures and Installations

System wiring

• Wired connection
• Wireless connection

Note:

1. The above distance is measured in a spacious (no obstacle) environment, Please refer to the actual test distance before installation.
2. Please check if the WiFi router net in the 2.4G band, the 5G band is not available, and do not hide your router network.
3. Please keep the distance between SS-B(WT) devices and router close, and check the WiFi signals.

Wiring diagram

Note:
An additional AC relay or contactor is needed when the total input current of the load (such as a pump) is higher than 1.5A.

Tuya APP network connection and operation

• Tuya APP network connection and operation
• Press and hold the Match/Set key for 2s, or push twice the Match/Set key fastly,
• Clear the previous network connection, enter Smart config mode, and the blue LED indicator flashes fast.
• Press and hold the Match/Set key for 5s:
  • Clear the previous network connection, enter AP config mode, and the blue LED indicator flashes slowly.
  • If the smart config fails, please try the AP config.
  • If the Tuya APP network connection succeeds, the blue LED indicator will stop flashing, and in the Tuya APP, you can find the SWITCH device.
• Tuya APP interface operation:
  • Touch the on/off key to turn on or off the light.

SS-B(WT) match RF remote control (Optional)

The end user can choose the suitable match/delete ways. Two options are offered for selection:

Use the SS-B(WT)’s Match key

Match:
Short press the match key of SS-B(WT), and immediately press the on/off key (single zone remote) or zone key (multiple zone remote) on the remote.

Delete:

• Press and hold the match key of SS-B(WT) for 10 s to delete all matches,
• The light blinks 5 times means all matched remotes were deleted.

Use Power Restart

Match:

• Switch off the power of SS-B(WT), then switch on the power, repeat,
• Immediately short press the on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote.
• The light blinks 3 times means the match is successful.

Delete:

• Switch off the power of SS-B(WT), then switch on the power, repeat,
• Immediately short press on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote.
• The light blinks 5 times means all matched remotes were deleted.

SS-B(WT) work as a WiFi-RF converter to match other RF switches or

controller

The end user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

• Match:

Short press the match key of the controller, and immediately press the on/off key on the Tuya APP. The LED indicator fast flashes a few times means the match is successful.

• Delete:

Press and hold the match key of the controller for 5s, The LED indicator fast flashes a few times meaning the match was deleted.

Use Power Restart

• Match:
  • Switch off the power of the controller, then switch on power, repeat,
  • Immediately short-press press on/off key 3 times on the Tuya APP. The light blinks 3 times means the match is successful.
• Delete:
  • Switch off the power of the controller, then switch on power, repeat,
  • Immediately short-press the on/off key 5 times on the Tuya APP. The light blinks 5 times means the match was deleted.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>