SoulBytes YM-UD22 15W 5 in 1 Magnetic Wireless Charger User Manual

SoulBytes YM-UD22 15W 5 in 1 Magnetic Wireless Charger User Manual

Read this manual carefully before use, and retain it for future reference.

Product Outline

1. Magnetic Charging Stand for iPhone 12/13 Series Only

2. Apple Watch Charging Stand

3. Wireless Charging Dock for Other Phone and Earphone

4. LED Lights

5. LED Touch Control
   

6. USB Output Port

7. Type-C Input Port

8. Radiating Hole

9. Anti-slip Pads

Product Introduction

• This is a multifunctional 5 in 1 magnetic wireless charging station that can fast magnet charge your for iPhone 12/13 series and simultaneously boosts up the Apple Watch 1/2/3/4/5/6/7/SE, AirPods Pro/2/3, and supported all Qi enabled devices.
• In addition, we also designed with nightlight and USB output, which frees you from daily plug and pull hassles, let the wireless devices guides you to an easier life.
• The product is designed with the magnetic double coil, you could place the phone vertically or horizontally without affecting charging, and watch your favorite TV show, movies while charging.

Instructions

1. USB Cable Connection
   Connect Type-C USB quick charge cable to the main body and plug it into the 18W QC 3.0 power adapter.
   Note: If charging 4 devices at the same time, for the best charging speed,please choose a PD 30W or above adapter.

2. **Charging

**

1.  **Wireless Charging**  

Place both your phone, Apple Watch and earphone case on the wireless charger. Make sure they are well located in the charging area of the wireless charger.

2.  **USB Output**  

Power your other devices with charging cables.
Note: Magnetic Charging Stand: Only support Magsafe cases or without cases.
Wireless Charging Dock: Supports charging for cases less than 5 mm / 0.2 inch thick and without attachments (e.g. Keys, Credit Cards, Pop Sockets, Magnets or Metal)

3. Night Lamp
   The night lamp supports 3-level of brightness adjustable by touch control, short single touch turn on the light, and then from neutral light, warm light and more warmer light and off 4 states cycled. The fourth press to turn off night lamp.

Product Specification

Applicable Devices

1. Smart Phones:
   • Apple: iPhone 13 Pro Max / 13 / 13 Pro / 13 mini / 12 Pro Max / 12 / 12 Pro / 12 mini / 11 Pro Max / 11 / 11 Pro / Xs Max / X / Xs / XR / 8 Plus / 8 / SE (2)
   • Samsung: S21 Ultra / S21 Plus / S21 / S20 Ultra / S20 Plus / S20 / S10 Plus / S10 5G / S10e / S10 / S9 Plus / S9 / S8 Plus / S8 / S7 Edge / S7 / S6 Edge Plus / S6 Edge / S6 / Note 20 / Note 10 / Note 10 Plus / Note 9 / Note 8 / Note PE / Note 7 / Note 5 / W2016 / W2017 (SM-W2017) / Kelly (SM-W2018) / Galaxy S Lite (SM-G8750) / SM-G9298 / Galaxy Fold
   • LG: G7 / G8 / V40 / V30
   • Huawei: Mate 20 Pro / Mate 20 RS / Mate 30 / Mate 30 Pro / Mate 30 RS / P30 Pro / P40
   • Xiaomi: MIX 2S / MIX 3 / Xiaomi9 / Xiaomi9 Pro 5G Other All Qi-enabled Phones.
2. Apple Watch:
   • Apple Watch Series 1 / 2 / 3 / 4 / 5 / 6 / 7 / SE
3. Earphone:
   • Apple: AirPods 2 / 3 / Pro
   • Samsung: Galaxy Buds / Buds+ / Buds Pro / Buds Live / Buds2
   • Huawei: Freebuds 2 / 3 / 4 / Pro
   • Other TWS earphone (with wireless charging case)

Product Contents

• 1 x 5 in 1 Wireless Charger
• 1 x Power Adapter
• 1 x USB Cable
• 1 x User Manual

Attention

1. Do not disassemble the product or change the actual use of the product without authorization.
2. Keep away from water or other liquids which may lead to short circuit when using the products.
3. Please use the product in the temperature range of -10℃ -45℃. Do not use the product near the fire source or under sunlight.
4. For safety, please place the product away from children.
5. Please do not place magnetic cards, magnetic stripe media,and precision machinery too close to the device. Not for the Otterbox Commuter case.

FCC Statement

FCC ID: 2A4N3-YM-UD22

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Service & Support

QR Code:

Tel. +1 844-551-6688 (US)
E-mail. support@techhys.com
WhatsApp. +86 13129576396
Facebook. @HYSservice

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>